Rheem-Ruud AP24410 Pressure Switch
The Rheem-Ruud AP24410 Pressure Switch is the genuine OEM replacement part for the legacy AP14551C, critical for maintaining the operational integrity of Low NOx residential and commercial water heaters. This ProTech® pressure switch is factory-calibrated to a 0.60" WC PF-V setpoint, ensuring the inducer fan motor creates the precise vacuum required for safe flue gas evacuation. By continuously monitoring combustion airflow, this safety interlock prevents the burner from firing under hazardous venting conditions or restricted airflow states.
Designed for high-performance HVAC and water heating systems, the AP24410 features a durable mounting bracket for a direct-fit installation on Rheem, Ruud, and WeatherKing units. As a Factory Authorized Part™, it ensures tight tolerance responsiveness to air pressure changes, helping contractors maintain low-emission compliance and optimal combustion efficiency. For professional technicians, this 0.60" WC switch is the standard for furnace and water heater repairs where OEM safety components are mandatory to prevent nuisance tripping or system failure.
Key Benefits:- Precise Airflow Detection: Calibrated at 0.60" WC to ensure the inducer motor generates sufficient static pressure for safe ignition.
- Universal Compatibility: Engineering-approved direct replacement for AP14551C across Rheem and Ruud Low NOx gas water heater models.
- Enhanced Safety Interlock: Automatically de-energizes the gas valve if improper venting or airflow is detected, preventing CO leakage.
- OEM Durability: Genuine ProTech® component built to withstand high-temperature environments in residential and commercial water heaters.
- Simple Installation: Includes the integrated mounting bracket for fast, reliable replacement during emergency service calls.
Is the AP24410 compatible with older AP14551C models?
Yes, the AP24410 is the factory-designated direct replacement for the AP14551C, featuring the same technical specifications and mounting footprint for Low NOx systems.
What is the vacuum pressure rating for this switch?
This specific Rheem-Ruud pressure switch is rated for 0.60 inches of water column (WC), a critical spec for induced draft water heating equipment.
Why is my water heater showing a pressure switch fault code?
A fault often indicates a failed diaphragm, a blocked vent pipe, or a failing inducer motor. Replacing the old unit with a genuine AP24410 ensures the safety circuit accurately monitors combustion air.
California Proposition 65 Warning: This product may contain materials known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Rheem-Ruud AP24410 Pressure Switch
The Rheem-Ruud AP24410 Pressure Switch is the genuine OEM replacement part for the legacy AP14551C, critical for maintaining the operational integrity of Low NOx residential and commercial water heaters. This ProTech® pressure switch is factory-calibrated to a 0.60" WC PF-V setpoint, ensuring the inducer fan motor creates the precise vacuum required for safe flue gas evacuation. By continuously monitoring combustion airflow, this safety interlock prevents the burner from firing under hazardous venting conditions or restricted airflow states.
Designed for high-performance HVAC and water heating systems, the AP24410 features a durable mounting bracket for a direct-fit installation on Rheem, Ruud, and WeatherKing units. As a Factory Authorized Part™, it ensures tight tolerance responsiveness to air pressure changes, helping contractors maintain low-emission compliance and optimal combustion efficiency. For professional technicians, this 0.60" WC switch is the standard for furnace and water heater repairs where OEM safety components are mandatory to prevent nuisance tripping or system failure.
Key Benefits:- Precise Airflow Detection: Calibrated at 0.60" WC to ensure the inducer motor generates sufficient static pressure for safe ignition.
- Universal Compatibility: Engineering-approved direct replacement for AP14551C across Rheem and Ruud Low NOx gas water heater models.
- Enhanced Safety Interlock: Automatically de-energizes the gas valve if improper venting or airflow is detected, preventing CO leakage.
- OEM Durability: Genuine ProTech® component built to withstand high-temperature environments in residential and commercial water heaters.
- Simple Installation: Includes the integrated mounting bracket for fast, reliable replacement during emergency service calls.
Is the AP24410 compatible with older AP14551C models?
Yes, the AP24410 is the factory-designated direct replacement for the AP14551C, featuring the same technical specifications and mounting footprint for Low NOx systems.
What is the vacuum pressure rating for this switch?
This specific Rheem-Ruud pressure switch is rated for 0.60 inches of water column (WC), a critical spec for induced draft water heating equipment.
Why is my water heater showing a pressure switch fault code?
A fault often indicates a failed diaphragm, a blocked vent pipe, or a failing inducer motor. Replacing the old unit with a genuine AP24410 ensures the safety circuit accurately monitors combustion air.
California Proposition 65 Warning: This product may contain materials known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Rheem-Ruud AP24410 Pressure Switch is the genuine OEM replacement part for the legacy AP14551C, critical for maintaining the operational integrity of Low NOx residential and commercial water heaters. This ProTech® pressure switch is factory-calibrated to a 0.60" WC PF-V setpoint, ensuring the inducer fan motor creates the precise vacuum required for safe flue gas evacuation. By continuously monitoring combustion airflow, this safety interlock prevents the burner from firing under hazardous venting conditions or restricted airflow states.
Designed for high-performance HVAC and water heating systems, the AP24410 features a durable mounting bracket for a direct-fit installation on Rheem, Ruud, and WeatherKing units. As a Factory Authorized Part™, it ensures tight tolerance responsiveness to air pressure changes, helping contractors maintain low-emission compliance and optimal combustion efficiency. For professional technicians, this 0.60" WC switch is the standard for furnace and water heater repairs where OEM safety components are mandatory to prevent nuisance tripping or system failure.
Key Benefits:- Precise Airflow Detection: Calibrated at 0.60" WC to ensure the inducer motor generates sufficient static pressure for safe ignition.
- Universal Compatibility: Engineering-approved direct replacement for AP14551C across Rheem and Ruud Low NOx gas water heater models.
- Enhanced Safety Interlock: Automatically de-energizes the gas valve if improper venting or airflow is detected, preventing CO leakage.
- OEM Durability: Genuine ProTech® component built to withstand high-temperature environments in residential and commercial water heaters.
- Simple Installation: Includes the integrated mounting bracket for fast, reliable replacement during emergency service calls.
Is the AP24410 compatible with older AP14551C models?
Yes, the AP24410 is the factory-designated direct replacement for the AP14551C, featuring the same technical specifications and mounting footprint for Low NOx systems.
What is the vacuum pressure rating for this switch?
This specific Rheem-Ruud pressure switch is rated for 0.60 inches of water column (WC), a critical spec for induced draft water heating equipment.
Why is my water heater showing a pressure switch fault code?
A fault often indicates a failed diaphragm, a blocked vent pipe, or a failing inducer motor. Replacing the old unit with a genuine AP24410 ensures the safety circuit accurately monitors combustion air.
California Proposition 65 Warning: This product may contain materials known to the State of California to cause cancer, birth defects, or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
