Rheem-Ruud 47-104184-01 Water Sensor
The Rheem-Ruud 47-104184-01 Water Sensor is a critical genuine OEM replacement part designed for high-efficiency condensing furnaces and refrigeration units. This HVAC water level sensor is typically installed within the collector box or condensate trap to monitor for moisture accumulation. In advanced Rheem and Ruud heating systems, including the R96VA and R97V series, this sensor works in a continuity loop with the integrated furnace control board. If the sensor detects a backup in the condensate drain line or a clogged trap, it breaks the circuit to prevent water-related damage and internal flooding, often manifesting as a Code 59 or Code 58 error on the diagnostic display. Utilizing a factory-original 47-104184-01K ensures precise electrical resistance and a secure fit, mitigating the nuisance trips often associated with aftermarket HVAC sensors.
Key Benefits:
- OEM Precision: Guaranteed compatibility with Rheem and Ruud condensing furnaces, maintaining the factory-specified safety loop.
- System Protection: Actively prevents heat exchanger corrosion and electrical shorts by detecting condensate backups before they overflow.
- Rapid Diagnostics: Engineered to provide accurate feedback to the control board, simplifying troubleshooting for error code 59.
- Field Performance: Features a durable probe design specifically built to withstand the acidic environment of HVAC condensate.
- Exact Fit: Designed for a direct plug-and-play installation in the condensate collector box, ensuring a reliable seal with the factory O-ring.
Common Questions:
What causes a "Water Sensed" error code on my Rheem furnace?
A Code 59 typically indicates that the 47-104184-01 sensor has detected moisture where it shouldn't be. This is often caused by a blocked condensate trap, debris in the drain lines, or in some cases, a failing sensor probe that has developed internal resistance or corrosion.
Can I clean the 47-104184-01 water sensor instead of replacing it?
While a veteran technician may attempt to clean surface oxidation from the probe, internal failure of the OEM sensor or damage to the wiring harness connector usually requires a full replacement to restore reliable system operation and prevent recurring lockouts.
Is the 47-104184-01K compatible with all Ruud furnaces?
This sensor is specifically designed for high-efficiency Rheem and Ruud units that utilize a condensate monitoring circuit. You should verify your specific model number, such as the R96VA or R98V, to ensure this is the correct genuine Rheem part for your unit.
Important Safety Notice:
- Professional Installation Required: This part must be installed by a qualified technician. Improper installation may lead to fire, explosion, electric shock, property damage, injury, or loss of life. Always follow the manufacturer’s instructions and seek professional advice when installing and using these parts.
California Proposition 65 Warning:
- For California residents: Additional product warnings may apply. Please refer to the Proposition 65 warnings for details.
Specifications:
- Brand: Rheem-Ruud
- Part Number: 47-104184-01 (Replaced by 47-104184-01K)
- Product Type: HVAC Water Sensor
- Application: Condensate Collector Box / Trap Monitoring
- Compatibility: Rheem/Ruud R96VA, R97V, R98V and compatible 90%+ Furnaces
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $9.44
-65%$9.44
$3.30Rheem-Ruud 47-104184-01 Water Sensor
The Rheem-Ruud 47-104184-01 Water Sensor is a critical genuine OEM replacement part designed for high-efficiency condensing furnaces and refrigeration units. This HVAC water level sensor is typically installed within the collector box or condensate trap to monitor for moisture accumulation. In advanced Rheem and Ruud heating systems, including the R96VA and R97V series, this sensor works in a continuity loop with the integrated furnace control board. If the sensor detects a backup in the condensate drain line or a clogged trap, it breaks the circuit to prevent water-related damage and internal flooding, often manifesting as a Code 59 or Code 58 error on the diagnostic display. Utilizing a factory-original 47-104184-01K ensures precise electrical resistance and a secure fit, mitigating the nuisance trips often associated with aftermarket HVAC sensors.
Key Benefits:
- OEM Precision: Guaranteed compatibility with Rheem and Ruud condensing furnaces, maintaining the factory-specified safety loop.
- System Protection: Actively prevents heat exchanger corrosion and electrical shorts by detecting condensate backups before they overflow.
- Rapid Diagnostics: Engineered to provide accurate feedback to the control board, simplifying troubleshooting for error code 59.
- Field Performance: Features a durable probe design specifically built to withstand the acidic environment of HVAC condensate.
- Exact Fit: Designed for a direct plug-and-play installation in the condensate collector box, ensuring a reliable seal with the factory O-ring.
Common Questions:
What causes a "Water Sensed" error code on my Rheem furnace?
A Code 59 typically indicates that the 47-104184-01 sensor has detected moisture where it shouldn't be. This is often caused by a blocked condensate trap, debris in the drain lines, or in some cases, a failing sensor probe that has developed internal resistance or corrosion.
Can I clean the 47-104184-01 water sensor instead of replacing it?
While a veteran technician may attempt to clean surface oxidation from the probe, internal failure of the OEM sensor or damage to the wiring harness connector usually requires a full replacement to restore reliable system operation and prevent recurring lockouts.
Is the 47-104184-01K compatible with all Ruud furnaces?
This sensor is specifically designed for high-efficiency Rheem and Ruud units that utilize a condensate monitoring circuit. You should verify your specific model number, such as the R96VA or R98V, to ensure this is the correct genuine Rheem part for your unit.
Important Safety Notice:
- Professional Installation Required: This part must be installed by a qualified technician. Improper installation may lead to fire, explosion, electric shock, property damage, injury, or loss of life. Always follow the manufacturer’s instructions and seek professional advice when installing and using these parts.
California Proposition 65 Warning:
- For California residents: Additional product warnings may apply. Please refer to the Proposition 65 warnings for details.
Specifications:
- Brand: Rheem-Ruud
- Part Number: 47-104184-01 (Replaced by 47-104184-01K)
- Product Type: HVAC Water Sensor
- Application: Condensate Collector Box / Trap Monitoring
- Compatibility: Rheem/Ruud R96VA, R97V, R98V and compatible 90%+ Furnaces
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Rheem-Ruud 47-104184-01 Water Sensor is a critical genuine OEM replacement part designed for high-efficiency condensing furnaces and refrigeration units. This HVAC water level sensor is typically installed within the collector box or condensate trap to monitor for moisture accumulation. In advanced Rheem and Ruud heating systems, including the R96VA and R97V series, this sensor works in a continuity loop with the integrated furnace control board. If the sensor detects a backup in the condensate drain line or a clogged trap, it breaks the circuit to prevent water-related damage and internal flooding, often manifesting as a Code 59 or Code 58 error on the diagnostic display. Utilizing a factory-original 47-104184-01K ensures precise electrical resistance and a secure fit, mitigating the nuisance trips often associated with aftermarket HVAC sensors.
Key Benefits:
- OEM Precision: Guaranteed compatibility with Rheem and Ruud condensing furnaces, maintaining the factory-specified safety loop.
- System Protection: Actively prevents heat exchanger corrosion and electrical shorts by detecting condensate backups before they overflow.
- Rapid Diagnostics: Engineered to provide accurate feedback to the control board, simplifying troubleshooting for error code 59.
- Field Performance: Features a durable probe design specifically built to withstand the acidic environment of HVAC condensate.
- Exact Fit: Designed for a direct plug-and-play installation in the condensate collector box, ensuring a reliable seal with the factory O-ring.
Common Questions:
What causes a "Water Sensed" error code on my Rheem furnace?
A Code 59 typically indicates that the 47-104184-01 sensor has detected moisture where it shouldn't be. This is often caused by a blocked condensate trap, debris in the drain lines, or in some cases, a failing sensor probe that has developed internal resistance or corrosion.
Can I clean the 47-104184-01 water sensor instead of replacing it?
While a veteran technician may attempt to clean surface oxidation from the probe, internal failure of the OEM sensor or damage to the wiring harness connector usually requires a full replacement to restore reliable system operation and prevent recurring lockouts.
Is the 47-104184-01K compatible with all Ruud furnaces?
This sensor is specifically designed for high-efficiency Rheem and Ruud units that utilize a condensate monitoring circuit. You should verify your specific model number, such as the R96VA or R98V, to ensure this is the correct genuine Rheem part for your unit.
Important Safety Notice:
- Professional Installation Required: This part must be installed by a qualified technician. Improper installation may lead to fire, explosion, electric shock, property damage, injury, or loss of life. Always follow the manufacturer’s instructions and seek professional advice when installing and using these parts.
California Proposition 65 Warning:
- For California residents: Additional product warnings may apply. Please refer to the Proposition 65 warnings for details.
Specifications:
- Brand: Rheem-Ruud
- Part Number: 47-104184-01 (Replaced by 47-104184-01K)
- Product Type: HVAC Water Sensor
- Application: Condensate Collector Box / Trap Monitoring
- Compatibility: Rheem/Ruud R96VA, R97V, R98V and compatible 90%+ Furnaces
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
