Reznor 197094 Hanger Kit
The Reznor 197094 Hanger Kit (Option CK22) is a specialized low ceiling suspension system engineered for tight-clearance installations where standard hanger rods are surgically impractical. This kit is designed to facilitate the direct mounting of UDAP, UDAS, and APD unit heaters (sizes 30-125) to the overhead structure. By utilizing these suspension angles, technicians can maintain required top clearances of 1 inch (25 mm) while minimizing the vertical footprint of the heater. The RZ197094 kit includes precision-formed brackets and necessary sheet metal screws to ensure a secure, vibration-resistant attachment between the heater cabinet and the ceiling. For contractors managing industrial HVAC installations in garages or warehouses with limited overhead, this direct-to-ceiling mounting hardware eliminates the need for field-fabricated offsets. It ensures the unit is supported with structural integrity while optimizing air distribution by keeping the heat source closer to the occupied zone.
Key Benefits
- Engineered specifically for Reznor UDAP and UDAS models from 30,000 to 125,000 BTU/h.
- Eliminates the need for threaded hanger rods, saving vertical space in low-headroom applications.
- Maintains critical top clearance specifications to prevent heat damage to the mounting surface.
- Constructed from heavy-duty steel for maximum unit heater support and long-term stability.
- Simplifies the HVAC installation process by utilizing existing cabinet screw points for alignment.
Common Questions
How do I install the Reznor 197094 kit on a UDAS model?
Remove the factory sheet metal screws from the front and rear edges of the top cabinet. Align the CK22 suspension angles with the existing holes and secure them using the original screws and the additional fastener provided in the kit.
What is the maximum weight capacity for this hanger kit?
The kit is rate-matched for Reznor unit heaters up to 125 MBH, which typically weigh approximately 101 lbs. Always verify that your ceiling structure has the sufficient load-carrying capacity before lifting the heater into place.
Can I use this for larger Reznor heaters over 125 MBH?
No, this specific low ceiling hanger kit is exclusively sized for the smaller cabinet frames of the UDAP, UDAS, and APD series (sizes 30 through 125). Larger units require different suspension hardware such as the CK8 or CK10 options.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $167.81
-65%$167.81
$58.73Reznor 197094 Hanger Kit
The Reznor 197094 Hanger Kit (Option CK22) is a specialized low ceiling suspension system engineered for tight-clearance installations where standard hanger rods are surgically impractical. This kit is designed to facilitate the direct mounting of UDAP, UDAS, and APD unit heaters (sizes 30-125) to the overhead structure. By utilizing these suspension angles, technicians can maintain required top clearances of 1 inch (25 mm) while minimizing the vertical footprint of the heater. The RZ197094 kit includes precision-formed brackets and necessary sheet metal screws to ensure a secure, vibration-resistant attachment between the heater cabinet and the ceiling. For contractors managing industrial HVAC installations in garages or warehouses with limited overhead, this direct-to-ceiling mounting hardware eliminates the need for field-fabricated offsets. It ensures the unit is supported with structural integrity while optimizing air distribution by keeping the heat source closer to the occupied zone.
Key Benefits
- Engineered specifically for Reznor UDAP and UDAS models from 30,000 to 125,000 BTU/h.
- Eliminates the need for threaded hanger rods, saving vertical space in low-headroom applications.
- Maintains critical top clearance specifications to prevent heat damage to the mounting surface.
- Constructed from heavy-duty steel for maximum unit heater support and long-term stability.
- Simplifies the HVAC installation process by utilizing existing cabinet screw points for alignment.
Common Questions
How do I install the Reznor 197094 kit on a UDAS model?
Remove the factory sheet metal screws from the front and rear edges of the top cabinet. Align the CK22 suspension angles with the existing holes and secure them using the original screws and the additional fastener provided in the kit.
What is the maximum weight capacity for this hanger kit?
The kit is rate-matched for Reznor unit heaters up to 125 MBH, which typically weigh approximately 101 lbs. Always verify that your ceiling structure has the sufficient load-carrying capacity before lifting the heater into place.
Can I use this for larger Reznor heaters over 125 MBH?
No, this specific low ceiling hanger kit is exclusively sized for the smaller cabinet frames of the UDAP, UDAS, and APD series (sizes 30 through 125). Larger units require different suspension hardware such as the CK8 or CK10 options.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Reznor 197094 Hanger Kit (Option CK22) is a specialized low ceiling suspension system engineered for tight-clearance installations where standard hanger rods are surgically impractical. This kit is designed to facilitate the direct mounting of UDAP, UDAS, and APD unit heaters (sizes 30-125) to the overhead structure. By utilizing these suspension angles, technicians can maintain required top clearances of 1 inch (25 mm) while minimizing the vertical footprint of the heater. The RZ197094 kit includes precision-formed brackets and necessary sheet metal screws to ensure a secure, vibration-resistant attachment between the heater cabinet and the ceiling. For contractors managing industrial HVAC installations in garages or warehouses with limited overhead, this direct-to-ceiling mounting hardware eliminates the need for field-fabricated offsets. It ensures the unit is supported with structural integrity while optimizing air distribution by keeping the heat source closer to the occupied zone.
Key Benefits
- Engineered specifically for Reznor UDAP and UDAS models from 30,000 to 125,000 BTU/h.
- Eliminates the need for threaded hanger rods, saving vertical space in low-headroom applications.
- Maintains critical top clearance specifications to prevent heat damage to the mounting surface.
- Constructed from heavy-duty steel for maximum unit heater support and long-term stability.
- Simplifies the HVAC installation process by utilizing existing cabinet screw points for alignment.
Common Questions
How do I install the Reznor 197094 kit on a UDAS model?
Remove the factory sheet metal screws from the front and rear edges of the top cabinet. Align the CK22 suspension angles with the existing holes and secure them using the original screws and the additional fastener provided in the kit.
What is the maximum weight capacity for this hanger kit?
The kit is rate-matched for Reznor unit heaters up to 125 MBH, which typically weigh approximately 101 lbs. Always verify that your ceiling structure has the sufficient load-carrying capacity before lifting the heater into place.
Can I use this for larger Reznor heaters over 125 MBH?
No, this specific low ceiling hanger kit is exclusively sized for the smaller cabinet frames of the UDAP, UDAS, and APD series (sizes 30 through 125). Larger units require different suspension hardware such as the CK8 or CK10 options.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
