Reznor 11792 Orifice
The Reznor 11792 is a precision-engineered #41 main burner orifice designed for specific gas-fired unit heaters. As a genuine OEM Reznor part, this 11792 orifice ensures accurate fuel metering and consistent thermal output for 100 MBH heating units. It is critical for maintaining the stoichiometric balance required for efficient combustion and preventing soot accumulation or burner inefficiencies. When performing a Reznor 11792 replacement or a propane to natural gas conversion, verifying the #41 drill size is essential for meeting manifold pressure requirements, especially on Reznor model 100 series units. This component is constructed from high-grade brass to withstand high-temperature environments within the burner assembly, providing contractors with a reliable HVAC replacement part that matches factory specifications. Proper installation of this natural gas burner orifice is necessary to maintain the integrity of the Reznor unit heater and ensure peak performance across commercial and industrial applications.
Key Benefits- Precision Metering: Specifically sized as a #41 drill size to provide optimal gas flow for 100,000 BTU/hr inputs.
- OEM Compatibility: Guaranteed fit for Reznor heater model 100, eliminating the risks associated with generic aftermarket components.
- Combustion Efficiency: Maintains the correct air-to-fuel ratio to ensure a steady blue flame and reduce carbon monoxide risk.
- Industrial Durability: Machined from solid brass for superior heat resistance and longevity in standard power vent and separated combustion units.
Is the Reznor 11792 used for Natural Gas or Propane?
The Reznor 11792 is a #41 orifice typically used for Natural Gas applications in 100 MBH units. If you are converting a unit to Liquid Propane (LP), a smaller orifice size (often 1.45mm or #53/#54 depending on the model) is usually required.
What happens if the wrong orifice size is installed?
Installing an incorrect orifice leads to improper manifold pressure. An oversized orifice causes over-firing and potential heat exchanger damage, while an undersized orifice leads to under-firing, poor heating performance, and burner resonance.
Which Reznor models are compatible with the 11792 orifice?
This part is most commonly used in Reznor model 100 heaters (including X, XE, and CX series). Always cross-reference your specific serial number and the manufacturer's gas conversion tables to ensure the drill size matches your altitude and fuel type.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $21.72
-65%$21.72
$7.60Reznor 11792 Orifice
The Reznor 11792 is a precision-engineered #41 main burner orifice designed for specific gas-fired unit heaters. As a genuine OEM Reznor part, this 11792 orifice ensures accurate fuel metering and consistent thermal output for 100 MBH heating units. It is critical for maintaining the stoichiometric balance required for efficient combustion and preventing soot accumulation or burner inefficiencies. When performing a Reznor 11792 replacement or a propane to natural gas conversion, verifying the #41 drill size is essential for meeting manifold pressure requirements, especially on Reznor model 100 series units. This component is constructed from high-grade brass to withstand high-temperature environments within the burner assembly, providing contractors with a reliable HVAC replacement part that matches factory specifications. Proper installation of this natural gas burner orifice is necessary to maintain the integrity of the Reznor unit heater and ensure peak performance across commercial and industrial applications.
Key Benefits- Precision Metering: Specifically sized as a #41 drill size to provide optimal gas flow for 100,000 BTU/hr inputs.
- OEM Compatibility: Guaranteed fit for Reznor heater model 100, eliminating the risks associated with generic aftermarket components.
- Combustion Efficiency: Maintains the correct air-to-fuel ratio to ensure a steady blue flame and reduce carbon monoxide risk.
- Industrial Durability: Machined from solid brass for superior heat resistance and longevity in standard power vent and separated combustion units.
Is the Reznor 11792 used for Natural Gas or Propane?
The Reznor 11792 is a #41 orifice typically used for Natural Gas applications in 100 MBH units. If you are converting a unit to Liquid Propane (LP), a smaller orifice size (often 1.45mm or #53/#54 depending on the model) is usually required.
What happens if the wrong orifice size is installed?
Installing an incorrect orifice leads to improper manifold pressure. An oversized orifice causes over-firing and potential heat exchanger damage, while an undersized orifice leads to under-firing, poor heating performance, and burner resonance.
Which Reznor models are compatible with the 11792 orifice?
This part is most commonly used in Reznor model 100 heaters (including X, XE, and CX series). Always cross-reference your specific serial number and the manufacturer's gas conversion tables to ensure the drill size matches your altitude and fuel type.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Reznor 11792 is a precision-engineered #41 main burner orifice designed for specific gas-fired unit heaters. As a genuine OEM Reznor part, this 11792 orifice ensures accurate fuel metering and consistent thermal output for 100 MBH heating units. It is critical for maintaining the stoichiometric balance required for efficient combustion and preventing soot accumulation or burner inefficiencies. When performing a Reznor 11792 replacement or a propane to natural gas conversion, verifying the #41 drill size is essential for meeting manifold pressure requirements, especially on Reznor model 100 series units. This component is constructed from high-grade brass to withstand high-temperature environments within the burner assembly, providing contractors with a reliable HVAC replacement part that matches factory specifications. Proper installation of this natural gas burner orifice is necessary to maintain the integrity of the Reznor unit heater and ensure peak performance across commercial and industrial applications.
Key Benefits- Precision Metering: Specifically sized as a #41 drill size to provide optimal gas flow for 100,000 BTU/hr inputs.
- OEM Compatibility: Guaranteed fit for Reznor heater model 100, eliminating the risks associated with generic aftermarket components.
- Combustion Efficiency: Maintains the correct air-to-fuel ratio to ensure a steady blue flame and reduce carbon monoxide risk.
- Industrial Durability: Machined from solid brass for superior heat resistance and longevity in standard power vent and separated combustion units.
Is the Reznor 11792 used for Natural Gas or Propane?
The Reznor 11792 is a #41 orifice typically used for Natural Gas applications in 100 MBH units. If you are converting a unit to Liquid Propane (LP), a smaller orifice size (often 1.45mm or #53/#54 depending on the model) is usually required.
What happens if the wrong orifice size is installed?
Installing an incorrect orifice leads to improper manifold pressure. An oversized orifice causes over-firing and potential heat exchanger damage, while an undersized orifice leads to under-firing, poor heating performance, and burner resonance.
Which Reznor models are compatible with the 11792 orifice?
This part is most commonly used in Reznor model 100 heaters (including X, XE, and CX series). Always cross-reference your specific serial number and the manufacturer's gas conversion tables to ensure the drill size matches your altitude and fuel type.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
