R-410A 25 Lbs Refrigerant Virgin New Factory Sealed Gas
This 25 lb. cylinder contains factory-sealed, 100% virgin R-410A refrigerant, the industry-standard HFC blend for modern residential and commercial HVAC systems. As a near-azeotropic mixture of 50% R-32 and 50% R-125, R-410A gas offers high heat transfer coefficients and superior thermodynamic performance compared to legacy HCFCs. Operating at higher pressures than R-22, this non-ozone depleting refrigerant requires POE (Polyolester) lubricant for proper oil return and compressor reliability. Designed for use in systems labeled AZ-20, Puron, or Suva 9100, it features an ASHRAE A1 safety classification, ensuring low toxicity and no flame propagation. When performing a refrigerant recharge or installing new split systems and heat pumps, utilizing virgin R-410A ensures the absence of contaminants or non-condensables that compromise subcooling and superheat readings. Ensure all recovery and manifold equipment is rated for the 4.94 MPa critical pressure of this high-efficiency refrigerant.
Key Benefits for Technicians:- Maximum System Efficiency: High heat transfer properties allow for more compact heat exchanger designs and optimized SEER ratings.
- System Longevity: Using virgin R-410A 25 lbs cylinders prevents the introduction of moisture or mixed gases often found in low-quality reclaimed batches.
- Zero Ozone Depletion: Fully compliant with EPA regulations as a sustainable replacement for R-22 in new HVAC installations.
- Stable Pressure-Temperature Relationship: Near-azeotropic behavior minimizes glide, allowing for accurate charging by weight or subcooling methods.
Can R-410A be used to retrofit an existing R-22 system?
No. R-410A refrigerant operates at significantly higher pressures (approximately 50% to 70% higher) and requires specific POE oil. Charging R-410A into an R-22 system will lead to catastrophic component failure.
Is an EPA 608 certification required for purchase?
Yes. To purchase wholesale R-410A refrigerant, you must provide a valid EPA 608 License or a Resale Statement in accordance with federal law. This product is restricted to the Lower 48 states.
What is the proper charging method for this HFC blend?
Because R-410A is a blend, it should always be removed from the cylinder in the liquid phase to prevent fractionation and ensure the correct 50/50 chemical composition enters the system.
EPA 608 License or Resale Statement Required to Purchase. Available to Lower 48 only.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $208.00
-65%$208.00
$72.80R-410A 25 Lbs Refrigerant Virgin New Factory Sealed Gas
This 25 lb. cylinder contains factory-sealed, 100% virgin R-410A refrigerant, the industry-standard HFC blend for modern residential and commercial HVAC systems. As a near-azeotropic mixture of 50% R-32 and 50% R-125, R-410A gas offers high heat transfer coefficients and superior thermodynamic performance compared to legacy HCFCs. Operating at higher pressures than R-22, this non-ozone depleting refrigerant requires POE (Polyolester) lubricant for proper oil return and compressor reliability. Designed for use in systems labeled AZ-20, Puron, or Suva 9100, it features an ASHRAE A1 safety classification, ensuring low toxicity and no flame propagation. When performing a refrigerant recharge or installing new split systems and heat pumps, utilizing virgin R-410A ensures the absence of contaminants or non-condensables that compromise subcooling and superheat readings. Ensure all recovery and manifold equipment is rated for the 4.94 MPa critical pressure of this high-efficiency refrigerant.
Key Benefits for Technicians:- Maximum System Efficiency: High heat transfer properties allow for more compact heat exchanger designs and optimized SEER ratings.
- System Longevity: Using virgin R-410A 25 lbs cylinders prevents the introduction of moisture or mixed gases often found in low-quality reclaimed batches.
- Zero Ozone Depletion: Fully compliant with EPA regulations as a sustainable replacement for R-22 in new HVAC installations.
- Stable Pressure-Temperature Relationship: Near-azeotropic behavior minimizes glide, allowing for accurate charging by weight or subcooling methods.
Can R-410A be used to retrofit an existing R-22 system?
No. R-410A refrigerant operates at significantly higher pressures (approximately 50% to 70% higher) and requires specific POE oil. Charging R-410A into an R-22 system will lead to catastrophic component failure.
Is an EPA 608 certification required for purchase?
Yes. To purchase wholesale R-410A refrigerant, you must provide a valid EPA 608 License or a Resale Statement in accordance with federal law. This product is restricted to the Lower 48 states.
What is the proper charging method for this HFC blend?
Because R-410A is a blend, it should always be removed from the cylinder in the liquid phase to prevent fractionation and ensure the correct 50/50 chemical composition enters the system.
EPA 608 License or Resale Statement Required to Purchase. Available to Lower 48 only.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
This 25 lb. cylinder contains factory-sealed, 100% virgin R-410A refrigerant, the industry-standard HFC blend for modern residential and commercial HVAC systems. As a near-azeotropic mixture of 50% R-32 and 50% R-125, R-410A gas offers high heat transfer coefficients and superior thermodynamic performance compared to legacy HCFCs. Operating at higher pressures than R-22, this non-ozone depleting refrigerant requires POE (Polyolester) lubricant for proper oil return and compressor reliability. Designed for use in systems labeled AZ-20, Puron, or Suva 9100, it features an ASHRAE A1 safety classification, ensuring low toxicity and no flame propagation. When performing a refrigerant recharge or installing new split systems and heat pumps, utilizing virgin R-410A ensures the absence of contaminants or non-condensables that compromise subcooling and superheat readings. Ensure all recovery and manifold equipment is rated for the 4.94 MPa critical pressure of this high-efficiency refrigerant.
Key Benefits for Technicians:- Maximum System Efficiency: High heat transfer properties allow for more compact heat exchanger designs and optimized SEER ratings.
- System Longevity: Using virgin R-410A 25 lbs cylinders prevents the introduction of moisture or mixed gases often found in low-quality reclaimed batches.
- Zero Ozone Depletion: Fully compliant with EPA regulations as a sustainable replacement for R-22 in new HVAC installations.
- Stable Pressure-Temperature Relationship: Near-azeotropic behavior minimizes glide, allowing for accurate charging by weight or subcooling methods.
Can R-410A be used to retrofit an existing R-22 system?
No. R-410A refrigerant operates at significantly higher pressures (approximately 50% to 70% higher) and requires specific POE oil. Charging R-410A into an R-22 system will lead to catastrophic component failure.
Is an EPA 608 certification required for purchase?
Yes. To purchase wholesale R-410A refrigerant, you must provide a valid EPA 608 License or a Resale Statement in accordance with federal law. This product is restricted to the Lower 48 states.
What is the proper charging method for this HFC blend?
Because R-410A is a blend, it should always be removed from the cylinder in the liquid phase to prevent fractionation and ensure the correct 50/50 chemical composition enters the system.
EPA 608 License or Resale Statement Required to Purchase. Available to Lower 48 only.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.