PennBarry 63753-0 Motor
When you're servicing PennBarry centrifugal rooftop exhaust units, the PennBarry 63753-0 Motor is the industry-standard replacement for ensuring vertical discharge performance. This 1/5 HP motor operates on 115V single-phase power and is a direct drop-in for DX11Q and FX11Q exhaust fans. Built with a 1725 RPM rating and a Genteq 7124-2394 cross-reference, this motor features an Open Drip Proof (ODP) enclosure designed specifically for ventilated environments where heat dissipation is critical. The 3.0 Amp draw and Class B thermal protection ensure the unit handles continuous-duty cycles without premature stator failure. As a seasoned tech, you know the importance of a proper NEMA frame fit; this unit utilizes a standard 48-frame platform with a 1/2" x 2-1/2" shaft to maintain correct blower wheel alignment. Replacing your Penn Vent electric motor with this OEM-spec part restores factory CFM ratings while keeping the electrical load within original circuit parameters.
- Direct OEM Replacement: Engineered specifically for PennBarry DX11Q and FX11Q rooftop vent sets to ensure bolt-on compatibility.
- Optimized Thermal Management: The Open Drip Proof (ODP) design facilitates maximum airflow across the windings for extended life in commercial kitchen or general ventilation hubs.
- Efficient Electrical Footprint: Low 3.0 Amp draw on a 115V single-phase circuit allows for integration into existing motor starters and disconnects without rewiring.
- Reliable Speed Control: The 1725 RPM four-pole design provides stable torque for centrifugal fan applications.
Common Questions
Is the PennBarry 63753-0 compatible with other brands?
While designed as a primary Penn Vent electric motor replacement for the DX and FX series, its 1/2" shaft and 115V 1PH specs may fit other air handlers. Always verify the "A" dimension and mounting bolt pattern before field modification.
Does this motor include the run capacitor?
Yes, this PSC motor is typically supplied with the required 3MFD capacitor to ensure proper starting torque and peak operating efficiency right out of the box.
Can this motor be used in high-moisture environments?
Because this is an ODP motor, it is rated for dry, ventilated areas. For applications with direct weather exposure or heavy wash-down requirements, a TEFC motor would be required, though this specific model is intended for protected rooftop housings.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
PennBarry 63753-0 Motor
When you're servicing PennBarry centrifugal rooftop exhaust units, the PennBarry 63753-0 Motor is the industry-standard replacement for ensuring vertical discharge performance. This 1/5 HP motor operates on 115V single-phase power and is a direct drop-in for DX11Q and FX11Q exhaust fans. Built with a 1725 RPM rating and a Genteq 7124-2394 cross-reference, this motor features an Open Drip Proof (ODP) enclosure designed specifically for ventilated environments where heat dissipation is critical. The 3.0 Amp draw and Class B thermal protection ensure the unit handles continuous-duty cycles without premature stator failure. As a seasoned tech, you know the importance of a proper NEMA frame fit; this unit utilizes a standard 48-frame platform with a 1/2" x 2-1/2" shaft to maintain correct blower wheel alignment. Replacing your Penn Vent electric motor with this OEM-spec part restores factory CFM ratings while keeping the electrical load within original circuit parameters.
- Direct OEM Replacement: Engineered specifically for PennBarry DX11Q and FX11Q rooftop vent sets to ensure bolt-on compatibility.
- Optimized Thermal Management: The Open Drip Proof (ODP) design facilitates maximum airflow across the windings for extended life in commercial kitchen or general ventilation hubs.
- Efficient Electrical Footprint: Low 3.0 Amp draw on a 115V single-phase circuit allows for integration into existing motor starters and disconnects without rewiring.
- Reliable Speed Control: The 1725 RPM four-pole design provides stable torque for centrifugal fan applications.
Common Questions
Is the PennBarry 63753-0 compatible with other brands?
While designed as a primary Penn Vent electric motor replacement for the DX and FX series, its 1/2" shaft and 115V 1PH specs may fit other air handlers. Always verify the "A" dimension and mounting bolt pattern before field modification.
Does this motor include the run capacitor?
Yes, this PSC motor is typically supplied with the required 3MFD capacitor to ensure proper starting torque and peak operating efficiency right out of the box.
Can this motor be used in high-moisture environments?
Because this is an ODP motor, it is rated for dry, ventilated areas. For applications with direct weather exposure or heavy wash-down requirements, a TEFC motor would be required, though this specific model is intended for protected rooftop housings.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
When you're servicing PennBarry centrifugal rooftop exhaust units, the PennBarry 63753-0 Motor is the industry-standard replacement for ensuring vertical discharge performance. This 1/5 HP motor operates on 115V single-phase power and is a direct drop-in for DX11Q and FX11Q exhaust fans. Built with a 1725 RPM rating and a Genteq 7124-2394 cross-reference, this motor features an Open Drip Proof (ODP) enclosure designed specifically for ventilated environments where heat dissipation is critical. The 3.0 Amp draw and Class B thermal protection ensure the unit handles continuous-duty cycles without premature stator failure. As a seasoned tech, you know the importance of a proper NEMA frame fit; this unit utilizes a standard 48-frame platform with a 1/2" x 2-1/2" shaft to maintain correct blower wheel alignment. Replacing your Penn Vent electric motor with this OEM-spec part restores factory CFM ratings while keeping the electrical load within original circuit parameters.
- Direct OEM Replacement: Engineered specifically for PennBarry DX11Q and FX11Q rooftop vent sets to ensure bolt-on compatibility.
- Optimized Thermal Management: The Open Drip Proof (ODP) design facilitates maximum airflow across the windings for extended life in commercial kitchen or general ventilation hubs.
- Efficient Electrical Footprint: Low 3.0 Amp draw on a 115V single-phase circuit allows for integration into existing motor starters and disconnects without rewiring.
- Reliable Speed Control: The 1725 RPM four-pole design provides stable torque for centrifugal fan applications.
Common Questions
Is the PennBarry 63753-0 compatible with other brands?
While designed as a primary Penn Vent electric motor replacement for the DX and FX series, its 1/2" shaft and 115V 1PH specs may fit other air handlers. Always verify the "A" dimension and mounting bolt pattern before field modification.
Does this motor include the run capacitor?
Yes, this PSC motor is typically supplied with the required 3MFD capacitor to ensure proper starting torque and peak operating efficiency right out of the box.
Can this motor be used in high-moisture environments?
Because this is an ODP motor, it is rated for dry, ventilated areas. For applications with direct weather exposure or heavy wash-down requirements, a TEFC motor would be required, though this specific model is intended for protected rooftop housings.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
