Parker C111C6 Coil
The Parker C111C6 solenoid coil is a heavy-duty 120VDC replacement coil engineered for precise fluid control in industrial and HVACR systems. Designed with Class F insulation, this 10-watt coil is built to handle continuous duty cycles while maintaining thermal stability in demanding environments. It features a 1/2" NPT conduit connection with 18-inch flying leads, ensuring a robust and secure electrical interface for Type 4 and 4X NEMA enclosures. When paired with a compatible Parker pressure vessel, it completes the magnetic circuit necessary for reliable plunger actuation, preventing the performance degradation often seen with 120VDC coils that lack proper magnetic integration.
Field technicians frequently specify the Parker Hannifin C111C6 for its compatibility with "Chart 7" valve bodies. The cURus recognized design ensures compliance with safety standards for low-voltage applications, making it a staple for maintaining pneumatic and refrigeration systems. To ensure long-term reliability and stay ahead of solenoid coil burnout, verify that your supply voltage remains within 10% of the 120VDC rating. Proper installation of the 1/2 inch conduit is critical to achieving the rated NEMA protection level and guarding internal windings against moisture and environmental contaminants.
- Optimized 120VDC Performance: The 10W power profile is specifically tuned for DC solenoid valve operation, ensuring a strong magnetic flux for consistent opening and closing.
- Durable Class F Insulation: Provides superior heat resistance, allowing the coil to operate reliably in high-ambient temperature zones common in mechanical rooms.
- NEMA 4/4X Compatibility: When correctly installed with a conduit, it provides wash-down protection, vital for HVACR fluid control in harsh conditions.
- Simplified Wiring: Equipped with 18-inch wire leads and a standard NPT opening for straightforward integration into existing electrical runs.
- Industry-Standard Certification: Meets CE and cURus requirements, providing technical assurance for commercial and industrial inspections.
Common Questions & Troubleshooting
What causes a coil to burn out in a 120VDC system?
Burnout is usually triggered by voltage spikes exceeding 10% of the rated 120VDC or mechanical resistance in the plunger. If the plunger cannot fully seat, the coil will draw excessive current, leading to thermal failure of the Class F insulation.
Is the C111C6 compatible with AC power sources?
No, this coil is strictly designed for 120VDC current. Applying AC voltage will lead to immediate failure; always verify your power supply with a voltmeter before energizing the circuit.
Can this coil be used in outdoor or wash-down environments?
Yes, the Parker C111C6 is designed to meet NEMA 4 and 4X standards when used with a suitable conduit installation and gasket, protecting the internal 120V replacement coil from water ingress.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Parker C111C6 Coil
The Parker C111C6 solenoid coil is a heavy-duty 120VDC replacement coil engineered for precise fluid control in industrial and HVACR systems. Designed with Class F insulation, this 10-watt coil is built to handle continuous duty cycles while maintaining thermal stability in demanding environments. It features a 1/2" NPT conduit connection with 18-inch flying leads, ensuring a robust and secure electrical interface for Type 4 and 4X NEMA enclosures. When paired with a compatible Parker pressure vessel, it completes the magnetic circuit necessary for reliable plunger actuation, preventing the performance degradation often seen with 120VDC coils that lack proper magnetic integration.
Field technicians frequently specify the Parker Hannifin C111C6 for its compatibility with "Chart 7" valve bodies. The cURus recognized design ensures compliance with safety standards for low-voltage applications, making it a staple for maintaining pneumatic and refrigeration systems. To ensure long-term reliability and stay ahead of solenoid coil burnout, verify that your supply voltage remains within 10% of the 120VDC rating. Proper installation of the 1/2 inch conduit is critical to achieving the rated NEMA protection level and guarding internal windings against moisture and environmental contaminants.
- Optimized 120VDC Performance: The 10W power profile is specifically tuned for DC solenoid valve operation, ensuring a strong magnetic flux for consistent opening and closing.
- Durable Class F Insulation: Provides superior heat resistance, allowing the coil to operate reliably in high-ambient temperature zones common in mechanical rooms.
- NEMA 4/4X Compatibility: When correctly installed with a conduit, it provides wash-down protection, vital for HVACR fluid control in harsh conditions.
- Simplified Wiring: Equipped with 18-inch wire leads and a standard NPT opening for straightforward integration into existing electrical runs.
- Industry-Standard Certification: Meets CE and cURus requirements, providing technical assurance for commercial and industrial inspections.
Common Questions & Troubleshooting
What causes a coil to burn out in a 120VDC system?
Burnout is usually triggered by voltage spikes exceeding 10% of the rated 120VDC or mechanical resistance in the plunger. If the plunger cannot fully seat, the coil will draw excessive current, leading to thermal failure of the Class F insulation.
Is the C111C6 compatible with AC power sources?
No, this coil is strictly designed for 120VDC current. Applying AC voltage will lead to immediate failure; always verify your power supply with a voltmeter before energizing the circuit.
Can this coil be used in outdoor or wash-down environments?
Yes, the Parker C111C6 is designed to meet NEMA 4 and 4X standards when used with a suitable conduit installation and gasket, protecting the internal 120V replacement coil from water ingress.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Parker C111C6 solenoid coil is a heavy-duty 120VDC replacement coil engineered for precise fluid control in industrial and HVACR systems. Designed with Class F insulation, this 10-watt coil is built to handle continuous duty cycles while maintaining thermal stability in demanding environments. It features a 1/2" NPT conduit connection with 18-inch flying leads, ensuring a robust and secure electrical interface for Type 4 and 4X NEMA enclosures. When paired with a compatible Parker pressure vessel, it completes the magnetic circuit necessary for reliable plunger actuation, preventing the performance degradation often seen with 120VDC coils that lack proper magnetic integration.
Field technicians frequently specify the Parker Hannifin C111C6 for its compatibility with "Chart 7" valve bodies. The cURus recognized design ensures compliance with safety standards for low-voltage applications, making it a staple for maintaining pneumatic and refrigeration systems. To ensure long-term reliability and stay ahead of solenoid coil burnout, verify that your supply voltage remains within 10% of the 120VDC rating. Proper installation of the 1/2 inch conduit is critical to achieving the rated NEMA protection level and guarding internal windings against moisture and environmental contaminants.
- Optimized 120VDC Performance: The 10W power profile is specifically tuned for DC solenoid valve operation, ensuring a strong magnetic flux for consistent opening and closing.
- Durable Class F Insulation: Provides superior heat resistance, allowing the coil to operate reliably in high-ambient temperature zones common in mechanical rooms.
- NEMA 4/4X Compatibility: When correctly installed with a conduit, it provides wash-down protection, vital for HVACR fluid control in harsh conditions.
- Simplified Wiring: Equipped with 18-inch wire leads and a standard NPT opening for straightforward integration into existing electrical runs.
- Industry-Standard Certification: Meets CE and cURus requirements, providing technical assurance for commercial and industrial inspections.
Common Questions & Troubleshooting
What causes a coil to burn out in a 120VDC system?
Burnout is usually triggered by voltage spikes exceeding 10% of the rated 120VDC or mechanical resistance in the plunger. If the plunger cannot fully seat, the coil will draw excessive current, leading to thermal failure of the Class F insulation.
Is the C111C6 compatible with AC power sources?
No, this coil is strictly designed for 120VDC current. Applying AC voltage will lead to immediate failure; always verify your power supply with a voltmeter before energizing the circuit.
Can this coil be used in outdoor or wash-down environments?
Yes, the Parker C111C6 is designed to meet NEMA 4 and 4X standards when used with a suitable conduit installation and gasket, protecting the internal 120V replacement coil from water ingress.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
