Nordyne 922520A Heater Kit
When you're out in the field dealing with a unit lockout, you need a reliable Rheem SP13845G natural gas valve to restore system integrity. This OEM water heater gas control is a direct replacement gas valve for specific Rheem, Ruud, and Richmond power vent models. Designed for natural gas water heater repair, it features 1/2-inch NPT connections and operates on a 120V circuit to interface with the blower and safety string. As a White-Rodgers 36G series equivalent, this valve provides high-capacity regulation, supporting up to 140,000 BTU/hr to ensure consistent burner performance and precise temperature modulation. The integrated diagnostic LED helps technicians quickly identify a gas control valve failure, often indicated by specific flash codes like the common 7-flash error. This robust Honeywell or White-Rodgers gas control housing includes built-in pressure taps for checking manifold pressure during combustion analysis, ensuring the 3.5" W.C. factory setting meets local site requirements. Stick with genuine Rheem replacement parts to ensure the thermal well and internal sensors match the original control logic for maximum safety and efficiency.
Key Benefits- Precise Gas Regulation: Maintains stable manifold pressure for efficient combustion and consistent water temperatures.
- Integrated Diagnostics: Features a status LED to accurately signal error codes, simplifying water heater troubleshooting for contractors.
- System Compatibility: Fully compatible with power vent ignition systems, including specific 36G22Y-202 and SP13845A cross-references.
- Compact High-Capacity Design: Handles high throughput while fitting within the tight footprints of modern high-efficiency heaters.
- Field-Serviceable: Includes inlet and outlet pressure taps for fast verification of gas supply and burner pressures.
How do I diagnose a gas valve failure on a Rheem unit?
Watch for the status light on the front of the control. A 7-flash pattern typically indicates an internal gas control valve failure, while other codes may point to sensor issues or thermopile faults. Verify 120V power at the Molex connector before assuming the valve is defective.
Can this valve be converted for use with Propane (LP)?
While the Rheem SP13845G is factory-set for natural gas, conversion to LP requires a specific manufacturer-approved conversion kit. Always check the rating plate of the appliance to ensure the fuel type and orifice sizes match the valve settings.
What should I check if the pilot won't stay lit?
Before replacing the valve, inspect the thermocouple or chamber sensor for soot buildup. Ensure the gas supply pressure is stable and that the thermal release device (TRD) has not tripped due to a high-limit condition.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $133.00
-65%$133.00
$46.55Nordyne 922520A Heater Kit
When you're out in the field dealing with a unit lockout, you need a reliable Rheem SP13845G natural gas valve to restore system integrity. This OEM water heater gas control is a direct replacement gas valve for specific Rheem, Ruud, and Richmond power vent models. Designed for natural gas water heater repair, it features 1/2-inch NPT connections and operates on a 120V circuit to interface with the blower and safety string. As a White-Rodgers 36G series equivalent, this valve provides high-capacity regulation, supporting up to 140,000 BTU/hr to ensure consistent burner performance and precise temperature modulation. The integrated diagnostic LED helps technicians quickly identify a gas control valve failure, often indicated by specific flash codes like the common 7-flash error. This robust Honeywell or White-Rodgers gas control housing includes built-in pressure taps for checking manifold pressure during combustion analysis, ensuring the 3.5" W.C. factory setting meets local site requirements. Stick with genuine Rheem replacement parts to ensure the thermal well and internal sensors match the original control logic for maximum safety and efficiency.
Key Benefits- Precise Gas Regulation: Maintains stable manifold pressure for efficient combustion and consistent water temperatures.
- Integrated Diagnostics: Features a status LED to accurately signal error codes, simplifying water heater troubleshooting for contractors.
- System Compatibility: Fully compatible with power vent ignition systems, including specific 36G22Y-202 and SP13845A cross-references.
- Compact High-Capacity Design: Handles high throughput while fitting within the tight footprints of modern high-efficiency heaters.
- Field-Serviceable: Includes inlet and outlet pressure taps for fast verification of gas supply and burner pressures.
How do I diagnose a gas valve failure on a Rheem unit?
Watch for the status light on the front of the control. A 7-flash pattern typically indicates an internal gas control valve failure, while other codes may point to sensor issues or thermopile faults. Verify 120V power at the Molex connector before assuming the valve is defective.
Can this valve be converted for use with Propane (LP)?
While the Rheem SP13845G is factory-set for natural gas, conversion to LP requires a specific manufacturer-approved conversion kit. Always check the rating plate of the appliance to ensure the fuel type and orifice sizes match the valve settings.
What should I check if the pilot won't stay lit?
Before replacing the valve, inspect the thermocouple or chamber sensor for soot buildup. Ensure the gas supply pressure is stable and that the thermal release device (TRD) has not tripped due to a high-limit condition.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
When you're out in the field dealing with a unit lockout, you need a reliable Rheem SP13845G natural gas valve to restore system integrity. This OEM water heater gas control is a direct replacement gas valve for specific Rheem, Ruud, and Richmond power vent models. Designed for natural gas water heater repair, it features 1/2-inch NPT connections and operates on a 120V circuit to interface with the blower and safety string. As a White-Rodgers 36G series equivalent, this valve provides high-capacity regulation, supporting up to 140,000 BTU/hr to ensure consistent burner performance and precise temperature modulation. The integrated diagnostic LED helps technicians quickly identify a gas control valve failure, often indicated by specific flash codes like the common 7-flash error. This robust Honeywell or White-Rodgers gas control housing includes built-in pressure taps for checking manifold pressure during combustion analysis, ensuring the 3.5" W.C. factory setting meets local site requirements. Stick with genuine Rheem replacement parts to ensure the thermal well and internal sensors match the original control logic for maximum safety and efficiency.
Key Benefits- Precise Gas Regulation: Maintains stable manifold pressure for efficient combustion and consistent water temperatures.
- Integrated Diagnostics: Features a status LED to accurately signal error codes, simplifying water heater troubleshooting for contractors.
- System Compatibility: Fully compatible with power vent ignition systems, including specific 36G22Y-202 and SP13845A cross-references.
- Compact High-Capacity Design: Handles high throughput while fitting within the tight footprints of modern high-efficiency heaters.
- Field-Serviceable: Includes inlet and outlet pressure taps for fast verification of gas supply and burner pressures.
How do I diagnose a gas valve failure on a Rheem unit?
Watch for the status light on the front of the control. A 7-flash pattern typically indicates an internal gas control valve failure, while other codes may point to sensor issues or thermopile faults. Verify 120V power at the Molex connector before assuming the valve is defective.
Can this valve be converted for use with Propane (LP)?
While the Rheem SP13845G is factory-set for natural gas, conversion to LP requires a specific manufacturer-approved conversion kit. Always check the rating plate of the appliance to ensure the fuel type and orifice sizes match the valve settings.
What should I check if the pilot won't stay lit?
Before replacing the valve, inspect the thermocouple or chamber sensor for soot buildup. Ensure the gas supply pressure is stable and that the thermal release device (TRD) has not tripped due to a high-limit condition.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
