Nordyne 270872R Heat Strip
The Nordyne 270872R Heat Strip is a heavy-duty 8kW electric heater assembly engineered for precise thermal management in B3BW and GB3BW wall-mount air handlers. Designed as a direct OEM element assembly, this 240V kit delivers approximately 27,300 BTU of supplemental or emergency heat, making it a critical component for maintaining discharge air temperatures when heat pump capacity reaches its balance point. As a veteran-grade supplemental heating element, it features a robust silver-finished steel mounting plate and high-grade resistive coils designed for optimal heat transfer and long-term durability in residential or light commercial vertical closets.
For contractors performing HVAC system repairs, this 8kW heater kit utilizes integrated wiring harnesses and a simplified terminal block layout to reduce bench time and ensure a secure fit within the designated heater bay. The assembly incorporates built-in limit protection to prevent overheating during low-airflow conditions, ensuring the safety of the fan coil cabinet. Whether you are replacing a burnt-out Nortek 270872R heater element or performing a fresh field installation, this auxiliary electric heat kit provides the reliable BTU output necessary for modular housing and small-footprint HVAC applications without requiring complex modification of the existing blower housing.
Key Benefits- OEM Compatibility: Specifically engineered for Nordyne B3BW and GB3BW series air handlers, ensuring perfect alignment with rear heat shield element holes.
- High Thermal Output: Provides 8 kilowatts of electric heat (27,300 BTU) to handle primary or auxiliary heating demands in colder climates.
- Rapid Installation: Features a drop-in design with integrated plug-and-play wiring connections for efficient field service.
- Safety Integrated: Equipped with high-limit thermal protection and robust element supports to maintain coil integrity under high static pressure.
- Professional Construction: Built with industrial-grade resistive wire and steel mounting for reliable operation in demanding cycles.
Is the Nordyne 270872R compatible with E2EB series furnaces?
While this 8kW strip is optimized for B3BW wall-mount units, electric furnaces like the E2EB typically require specific heater kits (such as the 922522D) that include the necessary sequencers and circuit breakers. Always verify the part number against the equipment data plate.
Does this kit include the circuit breakers?
The 270872R is a heater element assembly. Depending on the specific application and local electrical codes, you may need to provide separate overcurrent protection or utilize a kit like the 922523 if integrated breakers are required for the installation.
Can I install this 8kW strip in a unit currently using a 5kW or 10kW element?
Upgrading or downgrading heater kW requires verifying that the existing wire gauge (AWG) and circuit breaker size are rated for the new amperage load. Consult the unit's electrical specifications to ensure the blower speed is adjusted for the correct temperature rise.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $132.99
-65%$132.99
$46.55Nordyne 270872R Heat Strip
The Nordyne 270872R Heat Strip is a heavy-duty 8kW electric heater assembly engineered for precise thermal management in B3BW and GB3BW wall-mount air handlers. Designed as a direct OEM element assembly, this 240V kit delivers approximately 27,300 BTU of supplemental or emergency heat, making it a critical component for maintaining discharge air temperatures when heat pump capacity reaches its balance point. As a veteran-grade supplemental heating element, it features a robust silver-finished steel mounting plate and high-grade resistive coils designed for optimal heat transfer and long-term durability in residential or light commercial vertical closets.
For contractors performing HVAC system repairs, this 8kW heater kit utilizes integrated wiring harnesses and a simplified terminal block layout to reduce bench time and ensure a secure fit within the designated heater bay. The assembly incorporates built-in limit protection to prevent overheating during low-airflow conditions, ensuring the safety of the fan coil cabinet. Whether you are replacing a burnt-out Nortek 270872R heater element or performing a fresh field installation, this auxiliary electric heat kit provides the reliable BTU output necessary for modular housing and small-footprint HVAC applications without requiring complex modification of the existing blower housing.
Key Benefits- OEM Compatibility: Specifically engineered for Nordyne B3BW and GB3BW series air handlers, ensuring perfect alignment with rear heat shield element holes.
- High Thermal Output: Provides 8 kilowatts of electric heat (27,300 BTU) to handle primary or auxiliary heating demands in colder climates.
- Rapid Installation: Features a drop-in design with integrated plug-and-play wiring connections for efficient field service.
- Safety Integrated: Equipped with high-limit thermal protection and robust element supports to maintain coil integrity under high static pressure.
- Professional Construction: Built with industrial-grade resistive wire and steel mounting for reliable operation in demanding cycles.
Is the Nordyne 270872R compatible with E2EB series furnaces?
While this 8kW strip is optimized for B3BW wall-mount units, electric furnaces like the E2EB typically require specific heater kits (such as the 922522D) that include the necessary sequencers and circuit breakers. Always verify the part number against the equipment data plate.
Does this kit include the circuit breakers?
The 270872R is a heater element assembly. Depending on the specific application and local electrical codes, you may need to provide separate overcurrent protection or utilize a kit like the 922523 if integrated breakers are required for the installation.
Can I install this 8kW strip in a unit currently using a 5kW or 10kW element?
Upgrading or downgrading heater kW requires verifying that the existing wire gauge (AWG) and circuit breaker size are rated for the new amperage load. Consult the unit's electrical specifications to ensure the blower speed is adjusted for the correct temperature rise.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Nordyne 270872R Heat Strip is a heavy-duty 8kW electric heater assembly engineered for precise thermal management in B3BW and GB3BW wall-mount air handlers. Designed as a direct OEM element assembly, this 240V kit delivers approximately 27,300 BTU of supplemental or emergency heat, making it a critical component for maintaining discharge air temperatures when heat pump capacity reaches its balance point. As a veteran-grade supplemental heating element, it features a robust silver-finished steel mounting plate and high-grade resistive coils designed for optimal heat transfer and long-term durability in residential or light commercial vertical closets.
For contractors performing HVAC system repairs, this 8kW heater kit utilizes integrated wiring harnesses and a simplified terminal block layout to reduce bench time and ensure a secure fit within the designated heater bay. The assembly incorporates built-in limit protection to prevent overheating during low-airflow conditions, ensuring the safety of the fan coil cabinet. Whether you are replacing a burnt-out Nortek 270872R heater element or performing a fresh field installation, this auxiliary electric heat kit provides the reliable BTU output necessary for modular housing and small-footprint HVAC applications without requiring complex modification of the existing blower housing.
Key Benefits- OEM Compatibility: Specifically engineered for Nordyne B3BW and GB3BW series air handlers, ensuring perfect alignment with rear heat shield element holes.
- High Thermal Output: Provides 8 kilowatts of electric heat (27,300 BTU) to handle primary or auxiliary heating demands in colder climates.
- Rapid Installation: Features a drop-in design with integrated plug-and-play wiring connections for efficient field service.
- Safety Integrated: Equipped with high-limit thermal protection and robust element supports to maintain coil integrity under high static pressure.
- Professional Construction: Built with industrial-grade resistive wire and steel mounting for reliable operation in demanding cycles.
Is the Nordyne 270872R compatible with E2EB series furnaces?
While this 8kW strip is optimized for B3BW wall-mount units, electric furnaces like the E2EB typically require specific heater kits (such as the 922522D) that include the necessary sequencers and circuit breakers. Always verify the part number against the equipment data plate.
Does this kit include the circuit breakers?
The 270872R is a heater element assembly. Depending on the specific application and local electrical codes, you may need to provide separate overcurrent protection or utilize a kit like the 922523 if integrated breakers are required for the installation.
Can I install this 8kW strip in a unit currently using a 5kW or 10kW element?
Upgrading or downgrading heater kW requires verifying that the existing wire gauge (AWG) and circuit breaker size are rated for the new amperage load. Consult the unit's electrical specifications to ensure the blower speed is adjusted for the correct temperature rise.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
