Modine 5H0807480000 Fan Blade
The Modine 5H0807480000 Fan Blade is a critical OEM replacement engineered for precise balanced rotation in industrial and commercial unit heaters. This 3-blade fan configuration (also identified as 5H80748) is specifically designed to fit high-output units like the Modine PTC260 and PTS400, facilitating the static pressure required to move air effectively through the heat exchanger. For a technician in the field, using an original equipment manufacturer part is non-negotiable to ensure the hub geometry matches the motor shaft exactly, preventing vibration-induced bearing wear on the blower motor.
Constructed from heavy-duty materials, the 5H0807480000 features aerodynamically pitched blades to maximize CFM output while keeping decibel levels within operational specs. Whether you are performing a seasonal overhaul on a Modine gas-fired unit heater or responding to a failure in a warehouse ventilation system, this genuine HVAC blower fan ensures the unit maintains factory-spec airflow, which is vital for preventing heat exchanger overheating and ensuring consistent temperature distribution across large spaces.
Technical Highlights & Benefits:
- Precision Balancing: Reduces vibration to extend the service life of the fan motor and mounting brackets.
- Direct OEM Reference: Interchangeable with Modine part number 5H80748 for seamless field replacement.
- Optimized 3-Blade Geometry: Engineered for industrial unit heater fan blade applications, balancing total airflow with motor load efficiency.
- Application Specific: Verified compatibility with Modine PTS and PTC series heating equipment.
- Rugged Construction: Resists blade deforming and fatigue in high-demand heating and cooling cycles.
Common Technical Questions:
Is the 5H0807480000 compatible with my older Modine heater?
This part is the direct replacement for the 5H80748 model. It is primarily utilized in the PTC and PTS series, including the 260 and 400 MBH models. Always verify the shaft diameter and rotation direction before installation.
Why should I choose this OEM blade over a universal 3-blade fan?
Universal blades often differ in pitch and weight, which can lead to motor overheating or insufficient airflow across the heat exchanger, potentially tripping the high-limit switch. This OEM part ensures the system operates within its original design parameters.
What is the primary cause of fan blade failure in these units?
Most failures result from set-screw loosening or debris impact. When replacing the Modine 5H0807480000, ensure the set screw is torqued to the manufacturer’s specification on the motor shaft flat to prevent slipping.
?? California Proposition 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. www.P65Warnings.ca.gov
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Modine 5H0807480000 Fan Blade
The Modine 5H0807480000 Fan Blade is a critical OEM replacement engineered for precise balanced rotation in industrial and commercial unit heaters. This 3-blade fan configuration (also identified as 5H80748) is specifically designed to fit high-output units like the Modine PTC260 and PTS400, facilitating the static pressure required to move air effectively through the heat exchanger. For a technician in the field, using an original equipment manufacturer part is non-negotiable to ensure the hub geometry matches the motor shaft exactly, preventing vibration-induced bearing wear on the blower motor.
Constructed from heavy-duty materials, the 5H0807480000 features aerodynamically pitched blades to maximize CFM output while keeping decibel levels within operational specs. Whether you are performing a seasonal overhaul on a Modine gas-fired unit heater or responding to a failure in a warehouse ventilation system, this genuine HVAC blower fan ensures the unit maintains factory-spec airflow, which is vital for preventing heat exchanger overheating and ensuring consistent temperature distribution across large spaces.
Technical Highlights & Benefits:
- Precision Balancing: Reduces vibration to extend the service life of the fan motor and mounting brackets.
- Direct OEM Reference: Interchangeable with Modine part number 5H80748 for seamless field replacement.
- Optimized 3-Blade Geometry: Engineered for industrial unit heater fan blade applications, balancing total airflow with motor load efficiency.
- Application Specific: Verified compatibility with Modine PTS and PTC series heating equipment.
- Rugged Construction: Resists blade deforming and fatigue in high-demand heating and cooling cycles.
Common Technical Questions:
Is the 5H0807480000 compatible with my older Modine heater?
This part is the direct replacement for the 5H80748 model. It is primarily utilized in the PTC and PTS series, including the 260 and 400 MBH models. Always verify the shaft diameter and rotation direction before installation.
Why should I choose this OEM blade over a universal 3-blade fan?
Universal blades often differ in pitch and weight, which can lead to motor overheating or insufficient airflow across the heat exchanger, potentially tripping the high-limit switch. This OEM part ensures the system operates within its original design parameters.
What is the primary cause of fan blade failure in these units?
Most failures result from set-screw loosening or debris impact. When replacing the Modine 5H0807480000, ensure the set screw is torqued to the manufacturer’s specification on the motor shaft flat to prevent slipping.
?? California Proposition 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. www.P65Warnings.ca.gov
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Modine 5H0807480000 Fan Blade is a critical OEM replacement engineered for precise balanced rotation in industrial and commercial unit heaters. This 3-blade fan configuration (also identified as 5H80748) is specifically designed to fit high-output units like the Modine PTC260 and PTS400, facilitating the static pressure required to move air effectively through the heat exchanger. For a technician in the field, using an original equipment manufacturer part is non-negotiable to ensure the hub geometry matches the motor shaft exactly, preventing vibration-induced bearing wear on the blower motor.
Constructed from heavy-duty materials, the 5H0807480000 features aerodynamically pitched blades to maximize CFM output while keeping decibel levels within operational specs. Whether you are performing a seasonal overhaul on a Modine gas-fired unit heater or responding to a failure in a warehouse ventilation system, this genuine HVAC blower fan ensures the unit maintains factory-spec airflow, which is vital for preventing heat exchanger overheating and ensuring consistent temperature distribution across large spaces.
Technical Highlights & Benefits:
- Precision Balancing: Reduces vibration to extend the service life of the fan motor and mounting brackets.
- Direct OEM Reference: Interchangeable with Modine part number 5H80748 for seamless field replacement.
- Optimized 3-Blade Geometry: Engineered for industrial unit heater fan blade applications, balancing total airflow with motor load efficiency.
- Application Specific: Verified compatibility with Modine PTS and PTC series heating equipment.
- Rugged Construction: Resists blade deforming and fatigue in high-demand heating and cooling cycles.
Common Technical Questions:
Is the 5H0807480000 compatible with my older Modine heater?
This part is the direct replacement for the 5H80748 model. It is primarily utilized in the PTC and PTS series, including the 260 and 400 MBH models. Always verify the shaft diameter and rotation direction before installation.
Why should I choose this OEM blade over a universal 3-blade fan?
Universal blades often differ in pitch and weight, which can lead to motor overheating or insufficient airflow across the heat exchanger, potentially tripping the high-limit switch. This OEM part ensures the system operates within its original design parameters.
What is the primary cause of fan blade failure in these units?
Most failures result from set-screw loosening or debris impact. When replacing the Modine 5H0807480000, ensure the set screw is torqued to the manufacturer’s specification on the motor shaft flat to prevent slipping.
?? California Proposition 65 Warning: This product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. www.P65Warnings.ca.gov
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
