Mitsubishi Electric E22527302 Flow Fan
For service professionals maintaining Mitsubishi Electric M-Series and P-Series wall-mounted indoor units, the Mitsubishi Electric E22527302 Line Flow Fan is the critical OEM replacement part for restoring static pressure and airflow velocity. This crossflow blower wheel or line flow fan is precision-engineered to operate at speeds up to 1,200 RPM, ensuring consistent air distribution across the evaporator coil. With a length of approximately 32 inches and an outer diameter of 4.5 inches, this black plastic blower wheel is specifically designed to fit 1/4 inch motor shafts. It is a direct successor to part numbers E02-527-302 and E12-527-302, providing broad compatibility across a wide range of MSZ-GE and MSY-GE indoor air handlers, including the MSZ-GE09NA, MSZ-GE12NA, MSZ-GE15NA, and MSZ-GE18NA models. Replacing a fouled or unbalanced blower fan is necessary when units exhibit vibration noise, reduced CFM output, or musty odors caused by particulate accumulation on the blades. This genuine Mitsubishi air conditioner part ensures the system maintains its original SEER and HSPF ratings while providing the whisper-quiet operation expected from ductless mini-split technology.
Key Benefits:- Direct OEM Compatibility: Precisely manufactured for MSZ-GE09NA, MSZ-GE12NA, and MSZ-GE15NA series air handlers for a perfect fit on the 1/4" drive shaft.
- Restored Airflow Efficiency: Eliminates restricted air movement caused by dust buildup, ensuring the indoor unit reaches its rated BTU capacity.
- Reduced Mechanical Noise: Precision balanced to prevent rattling sounds and vibration that can lead to premature motor bearing failure.
- Optimized Heat Exchange: maintains proper laminar flow across the coil to prevent icing and short-cycling during high-demand cooling periods.
When should the blower wheel be replaced instead of cleaned?
While surface cleaning is routine maintenance, replacement is necessary if the plastic vanes are cracked, the hub interface is stripped, or the wheel has become permanently warped, leading to uncorrectable vibrations.
Which specific Mitsubishi models use the E22527302 fan?
This part is the standard replacement blower fan for the Mitsubishi MSZ-GE and MSY-GE series (sizes 06 to 18) and certain MSZ-A series models, including the MSZ-A24NA.
Is the set screw included with the line flow fan?
Most OEM replacement wheels require the technician to reuse the existing set screw from the motor shaft. Always verify the shaft alignment and tighten the screw securely to the flat portion of the 1/4" motor spindle.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $85.35
-65%$85.35
$29.87Mitsubishi Electric E22527302 Flow Fan
For service professionals maintaining Mitsubishi Electric M-Series and P-Series wall-mounted indoor units, the Mitsubishi Electric E22527302 Line Flow Fan is the critical OEM replacement part for restoring static pressure and airflow velocity. This crossflow blower wheel or line flow fan is precision-engineered to operate at speeds up to 1,200 RPM, ensuring consistent air distribution across the evaporator coil. With a length of approximately 32 inches and an outer diameter of 4.5 inches, this black plastic blower wheel is specifically designed to fit 1/4 inch motor shafts. It is a direct successor to part numbers E02-527-302 and E12-527-302, providing broad compatibility across a wide range of MSZ-GE and MSY-GE indoor air handlers, including the MSZ-GE09NA, MSZ-GE12NA, MSZ-GE15NA, and MSZ-GE18NA models. Replacing a fouled or unbalanced blower fan is necessary when units exhibit vibration noise, reduced CFM output, or musty odors caused by particulate accumulation on the blades. This genuine Mitsubishi air conditioner part ensures the system maintains its original SEER and HSPF ratings while providing the whisper-quiet operation expected from ductless mini-split technology.
Key Benefits:- Direct OEM Compatibility: Precisely manufactured for MSZ-GE09NA, MSZ-GE12NA, and MSZ-GE15NA series air handlers for a perfect fit on the 1/4" drive shaft.
- Restored Airflow Efficiency: Eliminates restricted air movement caused by dust buildup, ensuring the indoor unit reaches its rated BTU capacity.
- Reduced Mechanical Noise: Precision balanced to prevent rattling sounds and vibration that can lead to premature motor bearing failure.
- Optimized Heat Exchange: maintains proper laminar flow across the coil to prevent icing and short-cycling during high-demand cooling periods.
When should the blower wheel be replaced instead of cleaned?
While surface cleaning is routine maintenance, replacement is necessary if the plastic vanes are cracked, the hub interface is stripped, or the wheel has become permanently warped, leading to uncorrectable vibrations.
Which specific Mitsubishi models use the E22527302 fan?
This part is the standard replacement blower fan for the Mitsubishi MSZ-GE and MSY-GE series (sizes 06 to 18) and certain MSZ-A series models, including the MSZ-A24NA.
Is the set screw included with the line flow fan?
Most OEM replacement wheels require the technician to reuse the existing set screw from the motor shaft. Always verify the shaft alignment and tighten the screw securely to the flat portion of the 1/4" motor spindle.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
For service professionals maintaining Mitsubishi Electric M-Series and P-Series wall-mounted indoor units, the Mitsubishi Electric E22527302 Line Flow Fan is the critical OEM replacement part for restoring static pressure and airflow velocity. This crossflow blower wheel or line flow fan is precision-engineered to operate at speeds up to 1,200 RPM, ensuring consistent air distribution across the evaporator coil. With a length of approximately 32 inches and an outer diameter of 4.5 inches, this black plastic blower wheel is specifically designed to fit 1/4 inch motor shafts. It is a direct successor to part numbers E02-527-302 and E12-527-302, providing broad compatibility across a wide range of MSZ-GE and MSY-GE indoor air handlers, including the MSZ-GE09NA, MSZ-GE12NA, MSZ-GE15NA, and MSZ-GE18NA models. Replacing a fouled or unbalanced blower fan is necessary when units exhibit vibration noise, reduced CFM output, or musty odors caused by particulate accumulation on the blades. This genuine Mitsubishi air conditioner part ensures the system maintains its original SEER and HSPF ratings while providing the whisper-quiet operation expected from ductless mini-split technology.
Key Benefits:- Direct OEM Compatibility: Precisely manufactured for MSZ-GE09NA, MSZ-GE12NA, and MSZ-GE15NA series air handlers for a perfect fit on the 1/4" drive shaft.
- Restored Airflow Efficiency: Eliminates restricted air movement caused by dust buildup, ensuring the indoor unit reaches its rated BTU capacity.
- Reduced Mechanical Noise: Precision balanced to prevent rattling sounds and vibration that can lead to premature motor bearing failure.
- Optimized Heat Exchange: maintains proper laminar flow across the coil to prevent icing and short-cycling during high-demand cooling periods.
When should the blower wheel be replaced instead of cleaned?
While surface cleaning is routine maintenance, replacement is necessary if the plastic vanes are cracked, the hub interface is stripped, or the wheel has become permanently warped, leading to uncorrectable vibrations.
Which specific Mitsubishi models use the E22527302 fan?
This part is the standard replacement blower fan for the Mitsubishi MSZ-GE and MSY-GE series (sizes 06 to 18) and certain MSZ-A series models, including the MSZ-A24NA.
Is the set screw included with the line flow fan?
Most OEM replacement wheels require the technician to reuse the existing set screw from the motor shaft. Always verify the shaft alignment and tighten the screw securely to the flat portion of the 1/4" motor spindle.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
