Midco International 1360-03 Flame Rod Assembly
Maintain the integrity of your combustion loop with the Midco International 1360-03 Flame Rod Assembly. This genuine OEM component is the industry standard for direct fired burner systems, utilizing flame rectification technology to provide instantaneous feedback to your ignition control board. Engineered for high-demand industrial environments, the 1360-03 features a high-temperature alloy rod with a 3/4-inch tip and a 3-3/16-inch total rod length, housed in a durable ceramic insulator to prevent high-resistance leakage to ground. This assembly ensures the HVAC flame sensor accurately detects ionic current, preventing nuisance shutdowns and hazardous unburned fuel accumulation. Designed specifically for Midco’s commercial burner maintenance protocols, it provides the precise micro-amp signal strength—typically between 1 and 7 micro-amps DC—required for safe, continuous pilot and main burner operation. Whether you are servicing HMA series burners or larger process heaters, this assembly is critical for maintaining fuel efficiency and system safety.
Key Benefits:
- OEM Compatibility: Precision-fit replacement flame rod for Midco International burners, ensuring seamless integration with existing pilot brackets.
- High-Temp Durability: Constructed from high-temperature resistant alloys designed to withstand the rigors of direct-fired gas burners.
- Superior Sensing Accuracy: Optimized for flame ionization/rectification, providing the fast response times required for industrial safety standards.
- Optimized Dimensions: Standardized 3/16-inch rod diameter with a 3-inch base ensures drop-in replacement for rapid field service.
Common Questions:
How do I troubleshoot a low flame signal with the 1360-03?
Verify the assembly is properly positioned within the flame envelope and check the ceramic insulator for cracks. Ensure the burner is properly grounded, as a poor ground-to-rod surface area ratio (ideally 4:1) will degrade the flame rectification signal. Use a multimeter in series to measure DC micro-amps.
What is the proper way to clean the flame rod during maintenance?
Clean the rod using fine steel wool or a stiff wire brush to remove carbon deposits or "soot" buildup. Never use sandpaper or silicate-based abrasives, as these can create a permanent insulating coating that prevents flame sensing.
Is this rod compatible with other burner brands?
While designed as an OEM Midco replacement part, this flame rod may fit other industrial combustion systems requiring similar 3/16-inch diameter rods; however, verify specific mounting and rod lengths before installation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $43.76
-65%$43.76
$15.32Midco International 1360-03 Flame Rod Assembly
Maintain the integrity of your combustion loop with the Midco International 1360-03 Flame Rod Assembly. This genuine OEM component is the industry standard for direct fired burner systems, utilizing flame rectification technology to provide instantaneous feedback to your ignition control board. Engineered for high-demand industrial environments, the 1360-03 features a high-temperature alloy rod with a 3/4-inch tip and a 3-3/16-inch total rod length, housed in a durable ceramic insulator to prevent high-resistance leakage to ground. This assembly ensures the HVAC flame sensor accurately detects ionic current, preventing nuisance shutdowns and hazardous unburned fuel accumulation. Designed specifically for Midco’s commercial burner maintenance protocols, it provides the precise micro-amp signal strength—typically between 1 and 7 micro-amps DC—required for safe, continuous pilot and main burner operation. Whether you are servicing HMA series burners or larger process heaters, this assembly is critical for maintaining fuel efficiency and system safety.
Key Benefits:
- OEM Compatibility: Precision-fit replacement flame rod for Midco International burners, ensuring seamless integration with existing pilot brackets.
- High-Temp Durability: Constructed from high-temperature resistant alloys designed to withstand the rigors of direct-fired gas burners.
- Superior Sensing Accuracy: Optimized for flame ionization/rectification, providing the fast response times required for industrial safety standards.
- Optimized Dimensions: Standardized 3/16-inch rod diameter with a 3-inch base ensures drop-in replacement for rapid field service.
Common Questions:
How do I troubleshoot a low flame signal with the 1360-03?
Verify the assembly is properly positioned within the flame envelope and check the ceramic insulator for cracks. Ensure the burner is properly grounded, as a poor ground-to-rod surface area ratio (ideally 4:1) will degrade the flame rectification signal. Use a multimeter in series to measure DC micro-amps.
What is the proper way to clean the flame rod during maintenance?
Clean the rod using fine steel wool or a stiff wire brush to remove carbon deposits or "soot" buildup. Never use sandpaper or silicate-based abrasives, as these can create a permanent insulating coating that prevents flame sensing.
Is this rod compatible with other burner brands?
While designed as an OEM Midco replacement part, this flame rod may fit other industrial combustion systems requiring similar 3/16-inch diameter rods; however, verify specific mounting and rod lengths before installation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Maintain the integrity of your combustion loop with the Midco International 1360-03 Flame Rod Assembly. This genuine OEM component is the industry standard for direct fired burner systems, utilizing flame rectification technology to provide instantaneous feedback to your ignition control board. Engineered for high-demand industrial environments, the 1360-03 features a high-temperature alloy rod with a 3/4-inch tip and a 3-3/16-inch total rod length, housed in a durable ceramic insulator to prevent high-resistance leakage to ground. This assembly ensures the HVAC flame sensor accurately detects ionic current, preventing nuisance shutdowns and hazardous unburned fuel accumulation. Designed specifically for Midco’s commercial burner maintenance protocols, it provides the precise micro-amp signal strength—typically between 1 and 7 micro-amps DC—required for safe, continuous pilot and main burner operation. Whether you are servicing HMA series burners or larger process heaters, this assembly is critical for maintaining fuel efficiency and system safety.
Key Benefits:
- OEM Compatibility: Precision-fit replacement flame rod for Midco International burners, ensuring seamless integration with existing pilot brackets.
- High-Temp Durability: Constructed from high-temperature resistant alloys designed to withstand the rigors of direct-fired gas burners.
- Superior Sensing Accuracy: Optimized for flame ionization/rectification, providing the fast response times required for industrial safety standards.
- Optimized Dimensions: Standardized 3/16-inch rod diameter with a 3-inch base ensures drop-in replacement for rapid field service.
Common Questions:
How do I troubleshoot a low flame signal with the 1360-03?
Verify the assembly is properly positioned within the flame envelope and check the ceramic insulator for cracks. Ensure the burner is properly grounded, as a poor ground-to-rod surface area ratio (ideally 4:1) will degrade the flame rectification signal. Use a multimeter in series to measure DC micro-amps.
What is the proper way to clean the flame rod during maintenance?
Clean the rod using fine steel wool or a stiff wire brush to remove carbon deposits or "soot" buildup. Never use sandpaper or silicate-based abrasives, as these can create a permanent insulating coating that prevents flame sensing.
Is this rod compatible with other burner brands?
While designed as an OEM Midco replacement part, this flame rod may fit other industrial combustion systems requiring similar 3/16-inch diameter rods; however, verify specific mounting and rod lengths before installation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
