Maxon 27732 Flame Rod Assembly
The Maxon 27732 Flame Rod Assembly is a fundamental component for industrial combustion safety, specifically engineered for high-performance flame rectification. At a standard length of 20 inches with a 1/2" NPT connection, this assembly is built for OvenPak burner models 445, 456M, 470M, and 487M. As a veteran technician knows, field conditions often require precise adjustments; the Maxon 27732 is designed to be trimmed to length, allowing you to position the rod perfectly within the flame envelope to maximize micro-amp signal strength and eliminate nuisance shutdowns. The assembly features a robust ceramic insulator and includes a connector with a rubber cover to protect the electrical termination from environmental debris and high-temperature exposure. Whether you are performing a seasonal tune-up or a critical industrial burner repair, ensuring your flame sensor is responsive is the only way to maintain reliable combustion control. This genuine Honeywell Maxon replacement part provides the thermal stability and conductivity required for continuous-duty cycles in demanding industrial ovens and kilns.
Key Benefits:
- Field-Adjustable Length: The 20-inch rod can be cut to fit specific burner depths, ensuring optimal contact with the flame.
- High Compatibility: Direct fit for Maxon OvenPak 400 series and EB series burners utilizing flame rod detection.
- Simplified Installation: Features a standard 1/2 inch NPT threaded mounting for seamless integration into existing burner housings.
- Enhanced Protection: Supplied with a terminal connector and protective rubber boot to mitigate moisture and dust interference.
- Industrial Durability: Constructed with high-grade alloys and ceramics to withstand the rigors of industrial heating applications.
Common Questions:
Can the Maxon 27732 be used for spark ignition?
While often called a "flame/spark rod" in some catalogs, the 27732 is primarily optimized for flame sensing via rectification. For dedicated ignition, ensure your transformer and electrode gap are and configured per the burner's technical manual.
What is the best way to clean the rod during maintenance?
Technicians should use a fine abrasive cloth (like steel wool or emery cloth) to remove carbon buildup or oxidation. Avoid heavy scraping that could damage the rod's surface or the integrity of the ceramic insulator.
How do I resolve a low micro-amp signal?
Check the rod's position; it must be in the "blue" part of the flame. Because the 27732 is a field-adjustable flame rod, you may need to trim or extend its reach to ensure it is not grounding out against the burner nozzle or mixing cone.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $199.23
-65%$199.23
$69.73Maxon 27732 Flame Rod Assembly
The Maxon 27732 Flame Rod Assembly is a fundamental component for industrial combustion safety, specifically engineered for high-performance flame rectification. At a standard length of 20 inches with a 1/2" NPT connection, this assembly is built for OvenPak burner models 445, 456M, 470M, and 487M. As a veteran technician knows, field conditions often require precise adjustments; the Maxon 27732 is designed to be trimmed to length, allowing you to position the rod perfectly within the flame envelope to maximize micro-amp signal strength and eliminate nuisance shutdowns. The assembly features a robust ceramic insulator and includes a connector with a rubber cover to protect the electrical termination from environmental debris and high-temperature exposure. Whether you are performing a seasonal tune-up or a critical industrial burner repair, ensuring your flame sensor is responsive is the only way to maintain reliable combustion control. This genuine Honeywell Maxon replacement part provides the thermal stability and conductivity required for continuous-duty cycles in demanding industrial ovens and kilns.
Key Benefits:
- Field-Adjustable Length: The 20-inch rod can be cut to fit specific burner depths, ensuring optimal contact with the flame.
- High Compatibility: Direct fit for Maxon OvenPak 400 series and EB series burners utilizing flame rod detection.
- Simplified Installation: Features a standard 1/2 inch NPT threaded mounting for seamless integration into existing burner housings.
- Enhanced Protection: Supplied with a terminal connector and protective rubber boot to mitigate moisture and dust interference.
- Industrial Durability: Constructed with high-grade alloys and ceramics to withstand the rigors of industrial heating applications.
Common Questions:
Can the Maxon 27732 be used for spark ignition?
While often called a "flame/spark rod" in some catalogs, the 27732 is primarily optimized for flame sensing via rectification. For dedicated ignition, ensure your transformer and electrode gap are and configured per the burner's technical manual.
What is the best way to clean the rod during maintenance?
Technicians should use a fine abrasive cloth (like steel wool or emery cloth) to remove carbon buildup or oxidation. Avoid heavy scraping that could damage the rod's surface or the integrity of the ceramic insulator.
How do I resolve a low micro-amp signal?
Check the rod's position; it must be in the "blue" part of the flame. Because the 27732 is a field-adjustable flame rod, you may need to trim or extend its reach to ensure it is not grounding out against the burner nozzle or mixing cone.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Maxon 27732 Flame Rod Assembly is a fundamental component for industrial combustion safety, specifically engineered for high-performance flame rectification. At a standard length of 20 inches with a 1/2" NPT connection, this assembly is built for OvenPak burner models 445, 456M, 470M, and 487M. As a veteran technician knows, field conditions often require precise adjustments; the Maxon 27732 is designed to be trimmed to length, allowing you to position the rod perfectly within the flame envelope to maximize micro-amp signal strength and eliminate nuisance shutdowns. The assembly features a robust ceramic insulator and includes a connector with a rubber cover to protect the electrical termination from environmental debris and high-temperature exposure. Whether you are performing a seasonal tune-up or a critical industrial burner repair, ensuring your flame sensor is responsive is the only way to maintain reliable combustion control. This genuine Honeywell Maxon replacement part provides the thermal stability and conductivity required for continuous-duty cycles in demanding industrial ovens and kilns.
Key Benefits:
- Field-Adjustable Length: The 20-inch rod can be cut to fit specific burner depths, ensuring optimal contact with the flame.
- High Compatibility: Direct fit for Maxon OvenPak 400 series and EB series burners utilizing flame rod detection.
- Simplified Installation: Features a standard 1/2 inch NPT threaded mounting for seamless integration into existing burner housings.
- Enhanced Protection: Supplied with a terminal connector and protective rubber boot to mitigate moisture and dust interference.
- Industrial Durability: Constructed with high-grade alloys and ceramics to withstand the rigors of industrial heating applications.
Common Questions:
Can the Maxon 27732 be used for spark ignition?
While often called a "flame/spark rod" in some catalogs, the 27732 is primarily optimized for flame sensing via rectification. For dedicated ignition, ensure your transformer and electrode gap are and configured per the burner's technical manual.
What is the best way to clean the rod during maintenance?
Technicians should use a fine abrasive cloth (like steel wool or emery cloth) to remove carbon buildup or oxidation. Avoid heavy scraping that could damage the rod's surface or the integrity of the ceramic insulator.
How do I resolve a low micro-amp signal?
Check the rod's position; it must be in the "blue" part of the flame. Because the 27732 is a field-adjustable flame rod, you may need to trim or extend its reach to ensure it is not grounding out against the burner nozzle or mixing cone.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
