Manitowoc Ice 000008660 Probe Assembly
Ensure consistent bridge thickness and reliable harvest cycles with the Manitowoc Ice 000008660 Probe Assembly. This genuine OEM ice thickness control probe is a critical component for Indigo and Indigo NXT series modular machines, replacing legacy parts like the 000006744 and 000009184. As a veteran technician knows, a fouled or out-of-calibration sensor leads to thin, hollow sheets or extended freeze times that stress the compressor. The 000008660 features updated acoustic-ready housing without exposed metal, significantly reducing the impact of scale buildup and mineral deposits that typically cause premature harvest triggers.
This ice machine sensor replacement is designed for high-performance evaporators, providing precise feedback to the control board to initiate the harvest solenoid at the exact moment the bridge reaches its set dimension. It integrates seamlessly with popular models including the Manitowoc i0500, i0322, i0600, and larger i1800 units. For successful field service, verify the probe is clear of biological growth and properly positioned approximately 1/4 inch from the evaporator surface to maintain commercial ice machine efficiency and prevent safety limit trips.
Key Benefits for the Contractor:- Optimized Harvest Timing: Eliminates inconsistent "short cycling" by ensuring the ice sheet reaches the required thickness before signaling the board.
- Broad Compatibility: Standardized fit for Manitowoc Indigo series modular units, including I-series, ID, and IY models.
- Scale Resistance: The encapsulated design minimizes conductive interference from lime and calcium, extending intervals between cleanings.
- Direct OEM Fit: Maintains factory specifications for 115V and 208-230V systems without requiring harness modifications.
Does this probe solve "E01" or "E02" long freeze/harvest codes?
Yes, if the machine is staying in the freeze cycle too long because it can't detect the ice, or if it triggers harvest prematurely, replacing a pitted or malfunctioning Manitowoc 000008660 is the standard industry fix.
Is this part compatible with the S-Series or Q-Series machines?
No. While it looks similar, this assembly is specifically engineered for the electronics in Indigo and newer units. Older series require the single-wire 7627813 or the S-Series 2008029.
How do I test if the probe is faulty?
In most Indigo units, you can observe the "Ice Thickness" LED on the control board. If the LED stays on without ice touching the probe, the sensor is grounded/shorted and requires replacement.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Manitowoc Ice 000008660 Probe Assembly
Ensure consistent bridge thickness and reliable harvest cycles with the Manitowoc Ice 000008660 Probe Assembly. This genuine OEM ice thickness control probe is a critical component for Indigo and Indigo NXT series modular machines, replacing legacy parts like the 000006744 and 000009184. As a veteran technician knows, a fouled or out-of-calibration sensor leads to thin, hollow sheets or extended freeze times that stress the compressor. The 000008660 features updated acoustic-ready housing without exposed metal, significantly reducing the impact of scale buildup and mineral deposits that typically cause premature harvest triggers.
This ice machine sensor replacement is designed for high-performance evaporators, providing precise feedback to the control board to initiate the harvest solenoid at the exact moment the bridge reaches its set dimension. It integrates seamlessly with popular models including the Manitowoc i0500, i0322, i0600, and larger i1800 units. For successful field service, verify the probe is clear of biological growth and properly positioned approximately 1/4 inch from the evaporator surface to maintain commercial ice machine efficiency and prevent safety limit trips.
Key Benefits for the Contractor:- Optimized Harvest Timing: Eliminates inconsistent "short cycling" by ensuring the ice sheet reaches the required thickness before signaling the board.
- Broad Compatibility: Standardized fit for Manitowoc Indigo series modular units, including I-series, ID, and IY models.
- Scale Resistance: The encapsulated design minimizes conductive interference from lime and calcium, extending intervals between cleanings.
- Direct OEM Fit: Maintains factory specifications for 115V and 208-230V systems without requiring harness modifications.
Does this probe solve "E01" or "E02" long freeze/harvest codes?
Yes, if the machine is staying in the freeze cycle too long because it can't detect the ice, or if it triggers harvest prematurely, replacing a pitted or malfunctioning Manitowoc 000008660 is the standard industry fix.
Is this part compatible with the S-Series or Q-Series machines?
No. While it looks similar, this assembly is specifically engineered for the electronics in Indigo and newer units. Older series require the single-wire 7627813 or the S-Series 2008029.
How do I test if the probe is faulty?
In most Indigo units, you can observe the "Ice Thickness" LED on the control board. If the LED stays on without ice touching the probe, the sensor is grounded/shorted and requires replacement.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Ensure consistent bridge thickness and reliable harvest cycles with the Manitowoc Ice 000008660 Probe Assembly. This genuine OEM ice thickness control probe is a critical component for Indigo and Indigo NXT series modular machines, replacing legacy parts like the 000006744 and 000009184. As a veteran technician knows, a fouled or out-of-calibration sensor leads to thin, hollow sheets or extended freeze times that stress the compressor. The 000008660 features updated acoustic-ready housing without exposed metal, significantly reducing the impact of scale buildup and mineral deposits that typically cause premature harvest triggers.
This ice machine sensor replacement is designed for high-performance evaporators, providing precise feedback to the control board to initiate the harvest solenoid at the exact moment the bridge reaches its set dimension. It integrates seamlessly with popular models including the Manitowoc i0500, i0322, i0600, and larger i1800 units. For successful field service, verify the probe is clear of biological growth and properly positioned approximately 1/4 inch from the evaporator surface to maintain commercial ice machine efficiency and prevent safety limit trips.
Key Benefits for the Contractor:- Optimized Harvest Timing: Eliminates inconsistent "short cycling" by ensuring the ice sheet reaches the required thickness before signaling the board.
- Broad Compatibility: Standardized fit for Manitowoc Indigo series modular units, including I-series, ID, and IY models.
- Scale Resistance: The encapsulated design minimizes conductive interference from lime and calcium, extending intervals between cleanings.
- Direct OEM Fit: Maintains factory specifications for 115V and 208-230V systems without requiring harness modifications.
Does this probe solve "E01" or "E02" long freeze/harvest codes?
Yes, if the machine is staying in the freeze cycle too long because it can't detect the ice, or if it triggers harvest prematurely, replacing a pitted or malfunctioning Manitowoc 000008660 is the standard industry fix.
Is this part compatible with the S-Series or Q-Series machines?
No. While it looks similar, this assembly is specifically engineered for the electronics in Indigo and newer units. Older series require the single-wire 7627813 or the S-Series 2008029.
How do I test if the probe is faulty?
In most Indigo units, you can observe the "Ice Thickness" LED on the control board. If the LED stays on without ice touching the probe, the sensor is grounded/shorted and requires replacement.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
