Liebert 195551P1 Filter
The Liebert 195551P1 Filter is an OEM replacement air filter specifically engineered for precision climate control systems, including high-demand data centers and commercial HVAC units. This 29.5x28.5x2 MERV8 Pleated Filter provides superior particulate capture while maintaining the low static pressure required for optimal system airflow. For technicians maintaining Liebert environmental units, using this exact 195551P1 air filter replacement ensures proper fitment within the filter rack, preventing air bypass and ensuring consistent thermal management. The pleated media design features an expanded surface area that increases dust-holding capacity (DHC) over standard flat filters, effectively removing dust, pollen, and other airborne contaminants that can accumulate on sensitive electronic components. Built with a moisture-resistant frame and reinforced wire backing, this 29.5x28.5x2 HVAC filter is designed to withstand the continuous airflow of industrial applications without collapsing or shedding fibers, protecting the operational integrity of critical cooling hardware.
Key Benefits
- Standard MERV 8 filtration efficiency captures up to 85% of particles sized 3.0 to 10.0 microns, protecting cooling coils from debris buildup.
- High dust-holding capacity extended by professional-grade pleat geometry, reducing the frequency of maintenance cycles in 24/7 environments.
- Direct OEM compatibility for Liebert cooling units, ensuring a precise 29.5x28.5x2 inch seal and full system performance.
- Durable moisture-resistant construction prevents frame degradation in high-humidity conditions common in specialized HVACR setups.
- Optimized airflow resistance helps maintain the designed Static Pressure (ESP) of the air handler, supporting energy-efficient operation.
Common Questions
What is the ASHRAE 52.2 rating for this filter?
This filter carries a MERV 8 rating, providing a balanced solution for high-efficiency filtration without imposing excessive pressure drop on the blower motor.
Can I use an aftermarket filter instead of the OEM 195551P1?
While generic sizes may be similar, the 195551P1 is a specific Liebert replacement filter designed for a tight tolerances in critical cooling racks. Minor size discrepancies in aftermarket options can lead to air bypass, reducing cooling efficiency.
How often should these filters be replaced in a data center?
Replacement intervals typically range from 2 to 4 months depending on the specific environmental load; however, performance should be monitored via pressure drop across the filter bank to ensure peak efficiency.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Liebert 195551P1 Filter
The Liebert 195551P1 Filter is an OEM replacement air filter specifically engineered for precision climate control systems, including high-demand data centers and commercial HVAC units. This 29.5x28.5x2 MERV8 Pleated Filter provides superior particulate capture while maintaining the low static pressure required for optimal system airflow. For technicians maintaining Liebert environmental units, using this exact 195551P1 air filter replacement ensures proper fitment within the filter rack, preventing air bypass and ensuring consistent thermal management. The pleated media design features an expanded surface area that increases dust-holding capacity (DHC) over standard flat filters, effectively removing dust, pollen, and other airborne contaminants that can accumulate on sensitive electronic components. Built with a moisture-resistant frame and reinforced wire backing, this 29.5x28.5x2 HVAC filter is designed to withstand the continuous airflow of industrial applications without collapsing or shedding fibers, protecting the operational integrity of critical cooling hardware.
Key Benefits
- Standard MERV 8 filtration efficiency captures up to 85% of particles sized 3.0 to 10.0 microns, protecting cooling coils from debris buildup.
- High dust-holding capacity extended by professional-grade pleat geometry, reducing the frequency of maintenance cycles in 24/7 environments.
- Direct OEM compatibility for Liebert cooling units, ensuring a precise 29.5x28.5x2 inch seal and full system performance.
- Durable moisture-resistant construction prevents frame degradation in high-humidity conditions common in specialized HVACR setups.
- Optimized airflow resistance helps maintain the designed Static Pressure (ESP) of the air handler, supporting energy-efficient operation.
Common Questions
What is the ASHRAE 52.2 rating for this filter?
This filter carries a MERV 8 rating, providing a balanced solution for high-efficiency filtration without imposing excessive pressure drop on the blower motor.
Can I use an aftermarket filter instead of the OEM 195551P1?
While generic sizes may be similar, the 195551P1 is a specific Liebert replacement filter designed for a tight tolerances in critical cooling racks. Minor size discrepancies in aftermarket options can lead to air bypass, reducing cooling efficiency.
How often should these filters be replaced in a data center?
Replacement intervals typically range from 2 to 4 months depending on the specific environmental load; however, performance should be monitored via pressure drop across the filter bank to ensure peak efficiency.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Liebert 195551P1 Filter is an OEM replacement air filter specifically engineered for precision climate control systems, including high-demand data centers and commercial HVAC units. This 29.5x28.5x2 MERV8 Pleated Filter provides superior particulate capture while maintaining the low static pressure required for optimal system airflow. For technicians maintaining Liebert environmental units, using this exact 195551P1 air filter replacement ensures proper fitment within the filter rack, preventing air bypass and ensuring consistent thermal management. The pleated media design features an expanded surface area that increases dust-holding capacity (DHC) over standard flat filters, effectively removing dust, pollen, and other airborne contaminants that can accumulate on sensitive electronic components. Built with a moisture-resistant frame and reinforced wire backing, this 29.5x28.5x2 HVAC filter is designed to withstand the continuous airflow of industrial applications without collapsing or shedding fibers, protecting the operational integrity of critical cooling hardware.
Key Benefits
- Standard MERV 8 filtration efficiency captures up to 85% of particles sized 3.0 to 10.0 microns, protecting cooling coils from debris buildup.
- High dust-holding capacity extended by professional-grade pleat geometry, reducing the frequency of maintenance cycles in 24/7 environments.
- Direct OEM compatibility for Liebert cooling units, ensuring a precise 29.5x28.5x2 inch seal and full system performance.
- Durable moisture-resistant construction prevents frame degradation in high-humidity conditions common in specialized HVACR setups.
- Optimized airflow resistance helps maintain the designed Static Pressure (ESP) of the air handler, supporting energy-efficient operation.
Common Questions
What is the ASHRAE 52.2 rating for this filter?
This filter carries a MERV 8 rating, providing a balanced solution for high-efficiency filtration without imposing excessive pressure drop on the blower motor.
Can I use an aftermarket filter instead of the OEM 195551P1?
While generic sizes may be similar, the 195551P1 is a specific Liebert replacement filter designed for a tight tolerances in critical cooling racks. Minor size discrepancies in aftermarket options can lead to air bypass, reducing cooling efficiency.
How often should these filters be replaced in a data center?
Replacement intervals typically range from 2 to 4 months depending on the specific environmental load; however, performance should be monitored via pressure drop across the filter bank to ensure peak efficiency.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
