Lennox 93M10 Crankcase Heater
The Lennox 93M10 Crankcase Heater is a critical OEM replacement part engineered for high-voltage HVACR applications. Operating at 70 Watts and rated for 575V to 600V systems, this heater is designed to maintain optimal compressor oil temperature during the off-cycle. By preventing refrigerant migration and limiting oil viscosity increases in cold ambient conditions, the 93M10 ensures reliable compressor lubrication and protects the internal components of Lennox HVAC equipment from slugging at startup. This heater features a flexible belly-band design with a 6.58" to 8.93" diameter range, allowing for a precise fit on a wide variety of scroll and reciprocating compressors. Technicians should note the 12.50-inch lead length and 1/4-inch insulated lead end terminations, which facilitate clean integration into existing control circuits. For industrial and commercial 600V applications, utilizing a genuine Lennox 100499-07 heater is the standard for maintaining system efficiency and reducing mechanical stress on the motor during low-temperature operation.
Key Benefits- Prevents Refrigerant Migration: Actively boils off liquid refrigerant to prevent it from mixing with compressor oil, ensuring immediate lubrication upon startup.
- Optimized for 600V Systems: Specifically rated for high-voltage 575/600V circuits, eliminating the need for step-down transformers in commercial applications.
- Universal Diameter Compatibility: The adjustable clamp-on design fits compressors with a diameter range of 6.58 to 8.93 inches.
- Enhanced Cold Weather Performance: Maintains oil at an ideal viscosity to reduce torque requirements and prevent motor burnout in freezing environments.
Is the 93M10 compatible with 480V systems?
While often used in 575V/600V environments, always verify your specific unit's electrical schematic. This part is engineered for the higher 600V threshold typically found in Canadian or heavy industrial power grids.
What is the proper installation procedure for this heater?
The heater must be positioned around the lower part of the compressor shell, ensuring direct contact for heat transfer. It is critical to energize the heater for 24 hours prior to compressor commissioning to ensure all liquid refrigerant has been displaced from the oil.
Can I use this on a non-Lennox compressor?
As long as the compressor diameter falls between 6.58 and 8.93 inches and the voltage supply matches the 600V rating, the technical specifications allow for cross-application, though it is specifically listed as a Lennox OEM part.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Lennox 93M10 Crankcase Heater
The Lennox 93M10 Crankcase Heater is a critical OEM replacement part engineered for high-voltage HVACR applications. Operating at 70 Watts and rated for 575V to 600V systems, this heater is designed to maintain optimal compressor oil temperature during the off-cycle. By preventing refrigerant migration and limiting oil viscosity increases in cold ambient conditions, the 93M10 ensures reliable compressor lubrication and protects the internal components of Lennox HVAC equipment from slugging at startup. This heater features a flexible belly-band design with a 6.58" to 8.93" diameter range, allowing for a precise fit on a wide variety of scroll and reciprocating compressors. Technicians should note the 12.50-inch lead length and 1/4-inch insulated lead end terminations, which facilitate clean integration into existing control circuits. For industrial and commercial 600V applications, utilizing a genuine Lennox 100499-07 heater is the standard for maintaining system efficiency and reducing mechanical stress on the motor during low-temperature operation.
Key Benefits- Prevents Refrigerant Migration: Actively boils off liquid refrigerant to prevent it from mixing with compressor oil, ensuring immediate lubrication upon startup.
- Optimized for 600V Systems: Specifically rated for high-voltage 575/600V circuits, eliminating the need for step-down transformers in commercial applications.
- Universal Diameter Compatibility: The adjustable clamp-on design fits compressors with a diameter range of 6.58 to 8.93 inches.
- Enhanced Cold Weather Performance: Maintains oil at an ideal viscosity to reduce torque requirements and prevent motor burnout in freezing environments.
Is the 93M10 compatible with 480V systems?
While often used in 575V/600V environments, always verify your specific unit's electrical schematic. This part is engineered for the higher 600V threshold typically found in Canadian or heavy industrial power grids.
What is the proper installation procedure for this heater?
The heater must be positioned around the lower part of the compressor shell, ensuring direct contact for heat transfer. It is critical to energize the heater for 24 hours prior to compressor commissioning to ensure all liquid refrigerant has been displaced from the oil.
Can I use this on a non-Lennox compressor?
As long as the compressor diameter falls between 6.58 and 8.93 inches and the voltage supply matches the 600V rating, the technical specifications allow for cross-application, though it is specifically listed as a Lennox OEM part.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Lennox 93M10 Crankcase Heater is a critical OEM replacement part engineered for high-voltage HVACR applications. Operating at 70 Watts and rated for 575V to 600V systems, this heater is designed to maintain optimal compressor oil temperature during the off-cycle. By preventing refrigerant migration and limiting oil viscosity increases in cold ambient conditions, the 93M10 ensures reliable compressor lubrication and protects the internal components of Lennox HVAC equipment from slugging at startup. This heater features a flexible belly-band design with a 6.58" to 8.93" diameter range, allowing for a precise fit on a wide variety of scroll and reciprocating compressors. Technicians should note the 12.50-inch lead length and 1/4-inch insulated lead end terminations, which facilitate clean integration into existing control circuits. For industrial and commercial 600V applications, utilizing a genuine Lennox 100499-07 heater is the standard for maintaining system efficiency and reducing mechanical stress on the motor during low-temperature operation.
Key Benefits- Prevents Refrigerant Migration: Actively boils off liquid refrigerant to prevent it from mixing with compressor oil, ensuring immediate lubrication upon startup.
- Optimized for 600V Systems: Specifically rated for high-voltage 575/600V circuits, eliminating the need for step-down transformers in commercial applications.
- Universal Diameter Compatibility: The adjustable clamp-on design fits compressors with a diameter range of 6.58 to 8.93 inches.
- Enhanced Cold Weather Performance: Maintains oil at an ideal viscosity to reduce torque requirements and prevent motor burnout in freezing environments.
Is the 93M10 compatible with 480V systems?
While often used in 575V/600V environments, always verify your specific unit's electrical schematic. This part is engineered for the higher 600V threshold typically found in Canadian or heavy industrial power grids.
What is the proper installation procedure for this heater?
The heater must be positioned around the lower part of the compressor shell, ensuring direct contact for heat transfer. It is critical to energize the heater for 24 hours prior to compressor commissioning to ensure all liquid refrigerant has been displaced from the oil.
Can I use this on a non-Lennox compressor?
As long as the compressor diameter falls between 6.58 and 8.93 inches and the voltage supply matches the 600V rating, the technical specifications allow for cross-application, though it is specifically listed as a Lennox OEM part.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
