Lennox 92L23 Motor
When you're dealing with a residential blower failure, the Lennox 92L23 Blower Motor is the direct OEM replacement engineered for precise performance in Lennox, Armstrong, and Ducane air handlers. This 115V HVAC motor features a 1/4 HP output and a 1075 synchronous speed rated at 900 RPM, ensuring the static pressure requirements of your ductwork are met without over-amping the circuit. As a 3-speed blower motor, it allows for fine-tuned airflow adjustments across high, medium, and low taps to optimize CFM for both heating and cooling cycles.
The 92L23 Lennox motor is a Permanent Split Capacitor (PSC) design, requiring a separate run capacitor for proper phased start-up and torque. Its single-phase 60Hz construction includes internal thermal overload protection to prevent winding burnout during high-limit events. Built with a rugged frame and high-grade copper windings, this direct drive blower motor replaces legacy part numbers like 92L2301, providing a drop-in solution that restores system efficiency and quiet operation to the blower assembly.
Key Benefits for Contractors- OEM Compatibility: Precision-fit for Lennox-family equipment, including Allied, Concord, and Magic-Pak models.
- Multi-Speed Versatility: Three-speed taps (High/Med/Low) allow for customized air volume delivery.
- Thermal Protection: Integrated auto-reset thermal limit prevents hardware failure due to overheating.
- Quiet Operation: Precision-balanced rotor and high-quality bearings reduce vibrational noise in the plenum.
What capacitor does the Lennox 92L23 require?
This motor is a PSC (Permanent Split Capacitor) unit. Always check the motor nameplate for the specific MFD and voltage rating required; typically, it utilizes a 5 MFD or 7.5 MFD 370V capacitor depending on the specific revision of the blower housing.
Can I use this to replace a 1075 RPM motor?
No. Replacing a 900 RPM motor with a higher speed unit can cause excessive noise and potentially trip the limit switch due to air velocity issues. Stick to the 900 RPM specification to ensure proper heat exchange across the coil.
What are the lead wire colors for the speed taps?
Standard Lennox wiring typically uses Black for High, Blue for Medium, and Red for Low, with White as the Common. Always verify with the included wiring diagram before energizing the 115V circuit.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $262.27
-65%$262.27
$91.79Lennox 92L23 Motor
When you're dealing with a residential blower failure, the Lennox 92L23 Blower Motor is the direct OEM replacement engineered for precise performance in Lennox, Armstrong, and Ducane air handlers. This 115V HVAC motor features a 1/4 HP output and a 1075 synchronous speed rated at 900 RPM, ensuring the static pressure requirements of your ductwork are met without over-amping the circuit. As a 3-speed blower motor, it allows for fine-tuned airflow adjustments across high, medium, and low taps to optimize CFM for both heating and cooling cycles.
The 92L23 Lennox motor is a Permanent Split Capacitor (PSC) design, requiring a separate run capacitor for proper phased start-up and torque. Its single-phase 60Hz construction includes internal thermal overload protection to prevent winding burnout during high-limit events. Built with a rugged frame and high-grade copper windings, this direct drive blower motor replaces legacy part numbers like 92L2301, providing a drop-in solution that restores system efficiency and quiet operation to the blower assembly.
Key Benefits for Contractors- OEM Compatibility: Precision-fit for Lennox-family equipment, including Allied, Concord, and Magic-Pak models.
- Multi-Speed Versatility: Three-speed taps (High/Med/Low) allow for customized air volume delivery.
- Thermal Protection: Integrated auto-reset thermal limit prevents hardware failure due to overheating.
- Quiet Operation: Precision-balanced rotor and high-quality bearings reduce vibrational noise in the plenum.
What capacitor does the Lennox 92L23 require?
This motor is a PSC (Permanent Split Capacitor) unit. Always check the motor nameplate for the specific MFD and voltage rating required; typically, it utilizes a 5 MFD or 7.5 MFD 370V capacitor depending on the specific revision of the blower housing.
Can I use this to replace a 1075 RPM motor?
No. Replacing a 900 RPM motor with a higher speed unit can cause excessive noise and potentially trip the limit switch due to air velocity issues. Stick to the 900 RPM specification to ensure proper heat exchange across the coil.
What are the lead wire colors for the speed taps?
Standard Lennox wiring typically uses Black for High, Blue for Medium, and Red for Low, with White as the Common. Always verify with the included wiring diagram before energizing the 115V circuit.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
When you're dealing with a residential blower failure, the Lennox 92L23 Blower Motor is the direct OEM replacement engineered for precise performance in Lennox, Armstrong, and Ducane air handlers. This 115V HVAC motor features a 1/4 HP output and a 1075 synchronous speed rated at 900 RPM, ensuring the static pressure requirements of your ductwork are met without over-amping the circuit. As a 3-speed blower motor, it allows for fine-tuned airflow adjustments across high, medium, and low taps to optimize CFM for both heating and cooling cycles.
The 92L23 Lennox motor is a Permanent Split Capacitor (PSC) design, requiring a separate run capacitor for proper phased start-up and torque. Its single-phase 60Hz construction includes internal thermal overload protection to prevent winding burnout during high-limit events. Built with a rugged frame and high-grade copper windings, this direct drive blower motor replaces legacy part numbers like 92L2301, providing a drop-in solution that restores system efficiency and quiet operation to the blower assembly.
Key Benefits for Contractors- OEM Compatibility: Precision-fit for Lennox-family equipment, including Allied, Concord, and Magic-Pak models.
- Multi-Speed Versatility: Three-speed taps (High/Med/Low) allow for customized air volume delivery.
- Thermal Protection: Integrated auto-reset thermal limit prevents hardware failure due to overheating.
- Quiet Operation: Precision-balanced rotor and high-quality bearings reduce vibrational noise in the plenum.
What capacitor does the Lennox 92L23 require?
This motor is a PSC (Permanent Split Capacitor) unit. Always check the motor nameplate for the specific MFD and voltage rating required; typically, it utilizes a 5 MFD or 7.5 MFD 370V capacitor depending on the specific revision of the blower housing.
Can I use this to replace a 1075 RPM motor?
No. Replacing a 900 RPM motor with a higher speed unit can cause excessive noise and potentially trip the limit switch due to air velocity issues. Stick to the 900 RPM specification to ensure proper heat exchange across the coil.
What are the lead wire colors for the speed taps?
Standard Lennox wiring typically uses Black for High, Blue for Medium, and Red for Low, with White as the Common. Always verify with the included wiring diagram before energizing the 115V circuit.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
