Lennox 17F58 Collector Box
When you are troubleshooting pressure switch trips or internal siphoning issues on Lennox ML195 series furnaces, a compromised Lennox 17F58 Collector Box is often the culprit. This genuine OEM cold end header box kit is a critical condensate management component designed to collect and redirect moisture and combustion gases toward the inducer motor and drainage system. Measuring 15-5/8" by 5-3/8", the 17F58 collector box is engineered with high-grade materials to withstand the corrosive environment of high-efficiency condensing gas furnaces.
Replacing a warped or cracked Lennox furnace collector box is essential for maintaining proper static pressure and preventing furnace calibration errors. This 17F58 replacement part includes the necessary condensate trap, vinyl caps, and drain hose assembly required for a complete HVAC repair. Integrating this OEM kit ensures the structural integrity of the secondary heat exchanger interface, preventing the common "siphon" effect that leads to nuisance pressure switch faults and system lockout.
Key Benefits- Precision OEM Fit: Specifically engineered for the Lennox ML195 and related 95% AFUE units.
- Complete Installation Kit: Includes the 619598-53 collector box, trap, and clamps to reduce field-sourcing time.
- Enhanced Condensate Drainage: Improved port design helps prevent moisture backup into the combustion air inducer.
- Durable Construction: Built to resist the acidic byproduct of high-efficiency heating cycles.
Is the 17F58 compatible with all Lennox 90% plus furnaces?
This specific kit is targeted toward the ML195 series and models utilizing the 619598-53 footprint. Always verify the part number against your unit's data plate before installation.
Does this kit include the collector box gasket?
The kit includes the main housing and drainage accessories; however, it is standard practice to inspect the existing mounting surface and ensure a gas-tight seal during reassembly.
Will this fix a Lennox 'E228' or calibration fault?
While those codes often point to a restricted collector box or pressure port, technicians should also verify inducer RPM and flue integrity during the diagnostic process.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $108.74
-65%$108.74
$38.06Lennox 17F58 Collector Box
When you are troubleshooting pressure switch trips or internal siphoning issues on Lennox ML195 series furnaces, a compromised Lennox 17F58 Collector Box is often the culprit. This genuine OEM cold end header box kit is a critical condensate management component designed to collect and redirect moisture and combustion gases toward the inducer motor and drainage system. Measuring 15-5/8" by 5-3/8", the 17F58 collector box is engineered with high-grade materials to withstand the corrosive environment of high-efficiency condensing gas furnaces.
Replacing a warped or cracked Lennox furnace collector box is essential for maintaining proper static pressure and preventing furnace calibration errors. This 17F58 replacement part includes the necessary condensate trap, vinyl caps, and drain hose assembly required for a complete HVAC repair. Integrating this OEM kit ensures the structural integrity of the secondary heat exchanger interface, preventing the common "siphon" effect that leads to nuisance pressure switch faults and system lockout.
Key Benefits- Precision OEM Fit: Specifically engineered for the Lennox ML195 and related 95% AFUE units.
- Complete Installation Kit: Includes the 619598-53 collector box, trap, and clamps to reduce field-sourcing time.
- Enhanced Condensate Drainage: Improved port design helps prevent moisture backup into the combustion air inducer.
- Durable Construction: Built to resist the acidic byproduct of high-efficiency heating cycles.
Is the 17F58 compatible with all Lennox 90% plus furnaces?
This specific kit is targeted toward the ML195 series and models utilizing the 619598-53 footprint. Always verify the part number against your unit's data plate before installation.
Does this kit include the collector box gasket?
The kit includes the main housing and drainage accessories; however, it is standard practice to inspect the existing mounting surface and ensure a gas-tight seal during reassembly.
Will this fix a Lennox 'E228' or calibration fault?
While those codes often point to a restricted collector box or pressure port, technicians should also verify inducer RPM and flue integrity during the diagnostic process.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
When you are troubleshooting pressure switch trips or internal siphoning issues on Lennox ML195 series furnaces, a compromised Lennox 17F58 Collector Box is often the culprit. This genuine OEM cold end header box kit is a critical condensate management component designed to collect and redirect moisture and combustion gases toward the inducer motor and drainage system. Measuring 15-5/8" by 5-3/8", the 17F58 collector box is engineered with high-grade materials to withstand the corrosive environment of high-efficiency condensing gas furnaces.
Replacing a warped or cracked Lennox furnace collector box is essential for maintaining proper static pressure and preventing furnace calibration errors. This 17F58 replacement part includes the necessary condensate trap, vinyl caps, and drain hose assembly required for a complete HVAC repair. Integrating this OEM kit ensures the structural integrity of the secondary heat exchanger interface, preventing the common "siphon" effect that leads to nuisance pressure switch faults and system lockout.
Key Benefits- Precision OEM Fit: Specifically engineered for the Lennox ML195 and related 95% AFUE units.
- Complete Installation Kit: Includes the 619598-53 collector box, trap, and clamps to reduce field-sourcing time.
- Enhanced Condensate Drainage: Improved port design helps prevent moisture backup into the combustion air inducer.
- Durable Construction: Built to resist the acidic byproduct of high-efficiency heating cycles.
Is the 17F58 compatible with all Lennox 90% plus furnaces?
This specific kit is targeted toward the ML195 series and models utilizing the 619598-53 footprint. Always verify the part number against your unit's data plate before installation.
Does this kit include the collector box gasket?
The kit includes the main housing and drainage accessories; however, it is standard practice to inspect the existing mounting surface and ensure a gas-tight seal during reassembly.
Will this fix a Lennox 'E228' or calibration fault?
While those codes often point to a restricted collector box or pressure port, technicians should also verify inducer RPM and flue integrity during the diagnostic process.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
