Lennox 17F10 Collector Box
The Lennox 17F10 Collector Box (MPN: 619598-17, formerly 10Z55) is a critical component for high-efficiency condensing furnaces, specifically designed to manage the transition of flue gases and acidic condensate. As a veteran-grade OEM Lennox replacement part, this collector box serves as the manifold between the secondary heat exchanger and the inducer motor assembly. It is engineered with robust, high-performance materials to withstand the corrosive nature of furnace condensate, ensuring the structural integrity of the venting system. For a professional furnace repair, maintaining a tight seal at this junction is non-negotiable to prevent pressure switch trips or CO leaks. If you are seeing water pooling in the inducer or finding cracked collector box symptoms like rusting on the furnace floor, this genuine Lennox furnace part is the required fix. This part is verified for use in a wide range of Lennox G series and high-efficiency residential units, providing precise fitment that aftermarket alternatives often lack.
Key Benefits
- Optimized Condensate Drainage: Specifically pitched to direct moisture toward the drain trap, preventing standing water and heat exchanger corrosion.
- Direct OEM Compatibility: Replaces legacy part numbers 10Z55 and 105671-13, ensuring perfect alignment with existing inducer and heat exchanger ports.
- Airtight Pressure Management: Critical for maintaining the negative pressure required to close the low-pressure switch and initiate the ignition sequence.
- Corrosion Resistance: Manufactured with materials rated for long-term exposure to the acidic byproducts of high-efficiency combustion.
Common Questions
Why is my furnace leaking water from the collector box area?
Condensate leaks typically occur due to hairline cracks in the plastic housing or a failed gasket seal. Because the collector box handles acidic water produced during the 90%+ AFUE combustion process, any breach can lead to rapid deterioration of the surrounding furnace chassis.
Will a cracked collector box prevent my furnace from starting?
Yes. The collector box is under negative pressure. If a crack or leak allows air to bypass the system, the pressure switch may not detect enough vacuum to prove the draft, preventing the inducer motor from allowing the gas valve to open.
Is the 17F10 a direct replacement for the Lennox 10Z55?
Absolutely. The 17F10 is the current manufacturer-approved replacement for the 10Z55. It features the same mounting points and port configurations for a seamless "drop-in" installation during a service call.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $163.71
-65%$163.71
$57.30Lennox 17F10 Collector Box
The Lennox 17F10 Collector Box (MPN: 619598-17, formerly 10Z55) is a critical component for high-efficiency condensing furnaces, specifically designed to manage the transition of flue gases and acidic condensate. As a veteran-grade OEM Lennox replacement part, this collector box serves as the manifold between the secondary heat exchanger and the inducer motor assembly. It is engineered with robust, high-performance materials to withstand the corrosive nature of furnace condensate, ensuring the structural integrity of the venting system. For a professional furnace repair, maintaining a tight seal at this junction is non-negotiable to prevent pressure switch trips or CO leaks. If you are seeing water pooling in the inducer or finding cracked collector box symptoms like rusting on the furnace floor, this genuine Lennox furnace part is the required fix. This part is verified for use in a wide range of Lennox G series and high-efficiency residential units, providing precise fitment that aftermarket alternatives often lack.
Key Benefits
- Optimized Condensate Drainage: Specifically pitched to direct moisture toward the drain trap, preventing standing water and heat exchanger corrosion.
- Direct OEM Compatibility: Replaces legacy part numbers 10Z55 and 105671-13, ensuring perfect alignment with existing inducer and heat exchanger ports.
- Airtight Pressure Management: Critical for maintaining the negative pressure required to close the low-pressure switch and initiate the ignition sequence.
- Corrosion Resistance: Manufactured with materials rated for long-term exposure to the acidic byproducts of high-efficiency combustion.
Common Questions
Why is my furnace leaking water from the collector box area?
Condensate leaks typically occur due to hairline cracks in the plastic housing or a failed gasket seal. Because the collector box handles acidic water produced during the 90%+ AFUE combustion process, any breach can lead to rapid deterioration of the surrounding furnace chassis.
Will a cracked collector box prevent my furnace from starting?
Yes. The collector box is under negative pressure. If a crack or leak allows air to bypass the system, the pressure switch may not detect enough vacuum to prove the draft, preventing the inducer motor from allowing the gas valve to open.
Is the 17F10 a direct replacement for the Lennox 10Z55?
Absolutely. The 17F10 is the current manufacturer-approved replacement for the 10Z55. It features the same mounting points and port configurations for a seamless "drop-in" installation during a service call.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Lennox 17F10 Collector Box (MPN: 619598-17, formerly 10Z55) is a critical component for high-efficiency condensing furnaces, specifically designed to manage the transition of flue gases and acidic condensate. As a veteran-grade OEM Lennox replacement part, this collector box serves as the manifold between the secondary heat exchanger and the inducer motor assembly. It is engineered with robust, high-performance materials to withstand the corrosive nature of furnace condensate, ensuring the structural integrity of the venting system. For a professional furnace repair, maintaining a tight seal at this junction is non-negotiable to prevent pressure switch trips or CO leaks. If you are seeing water pooling in the inducer or finding cracked collector box symptoms like rusting on the furnace floor, this genuine Lennox furnace part is the required fix. This part is verified for use in a wide range of Lennox G series and high-efficiency residential units, providing precise fitment that aftermarket alternatives often lack.
Key Benefits
- Optimized Condensate Drainage: Specifically pitched to direct moisture toward the drain trap, preventing standing water and heat exchanger corrosion.
- Direct OEM Compatibility: Replaces legacy part numbers 10Z55 and 105671-13, ensuring perfect alignment with existing inducer and heat exchanger ports.
- Airtight Pressure Management: Critical for maintaining the negative pressure required to close the low-pressure switch and initiate the ignition sequence.
- Corrosion Resistance: Manufactured with materials rated for long-term exposure to the acidic byproducts of high-efficiency combustion.
Common Questions
Why is my furnace leaking water from the collector box area?
Condensate leaks typically occur due to hairline cracks in the plastic housing or a failed gasket seal. Because the collector box handles acidic water produced during the 90%+ AFUE combustion process, any breach can lead to rapid deterioration of the surrounding furnace chassis.
Will a cracked collector box prevent my furnace from starting?
Yes. The collector box is under negative pressure. If a crack or leak allows air to bypass the system, the pressure switch may not detect enough vacuum to prove the draft, preventing the inducer motor from allowing the gas valve to open.
Is the 17F10 a direct replacement for the Lennox 10Z55?
Absolutely. The 17F10 is the current manufacturer-approved replacement for the 10Z55. It features the same mounting points and port configurations for a seamless "drop-in" installation during a service call.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
