Lennox 16U06 Collector Box
The Lennox 16U06 Collector Box (also identified as model 619598-06) is a critical cold end header box kit designed for high-efficiency Lennox gas furnaces. Built to withstand the corrosive nature of acidic condensate, this OEM furnace collector box assembly manages the transition of combustion gases from the heat exchanger into the venting system. As a veteran technician knows, maintaining a precise furnace pressure switch signal and proper condensate drainage depends entirely on the structural integrity of this box. Cracks or seal failures in this component will lead to pressure fluctuations, causing intermittent furnace ignition failure or total system lockout.
This kit is engineered for specific condensing furnace models and includes the necessary hardware to ensure a gastight seal at the cold end of the heat exchanger. When performing a Lennox furnace repair, verify that the internal baffles and drain ports are clear to prevent water backup into the inducer motor. This OEM replacement part ensures your draft remains stable and your combustion process stays within manufacturer specifications for peak performance and safety.
Key Benefits:- Direct OEM Replacement: Ensures exact fit and alignment with the heat exchanger and inducer housing for 16U06-compatible Lennox units.
- Enhanced Durability: Constructed from corrosion-resistant materials to handle the high-acidity condensate produced by 90%+ AFUE furnaces.
- Optimized Pressure Control: Maintains steady draft and proper pressure switch operation, preventing nuisance furnace trips.
- Integrated Condensate Management: Features precision-molded drain connections to facilitate the seamless removal of moisture from the flue gas.
- Complete Header Kit: Simplifies the replacement process by providing the core 619598-06 assembly needed for a professional-grade installation.
How do I know if my Lennox collector box is cracked?
Inspect the exterior of the box for white, crusty mineral deposits or visible water stains. Often, a small hairline crack will cause the pressure switch to trip before you see a major leak.
Is the gasket included with the 16U06 kit?
Technicians should verify the specific kit contents; however, it is professional standard practice to replace or reseal the interface with high-temp RTV or the provided foam gasket to ensure a gastight seal.
Can a clogged collector box cause my inducer motor to fail?
Yes. If the drain ports in the collector box are blocked, condensate will back up into the inducer wheel, increasing the load on the motor and potentially shorting the internal electronics.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $120.17
-65%$120.17
$42.06Lennox 16U06 Collector Box
The Lennox 16U06 Collector Box (also identified as model 619598-06) is a critical cold end header box kit designed for high-efficiency Lennox gas furnaces. Built to withstand the corrosive nature of acidic condensate, this OEM furnace collector box assembly manages the transition of combustion gases from the heat exchanger into the venting system. As a veteran technician knows, maintaining a precise furnace pressure switch signal and proper condensate drainage depends entirely on the structural integrity of this box. Cracks or seal failures in this component will lead to pressure fluctuations, causing intermittent furnace ignition failure or total system lockout.
This kit is engineered for specific condensing furnace models and includes the necessary hardware to ensure a gastight seal at the cold end of the heat exchanger. When performing a Lennox furnace repair, verify that the internal baffles and drain ports are clear to prevent water backup into the inducer motor. This OEM replacement part ensures your draft remains stable and your combustion process stays within manufacturer specifications for peak performance and safety.
Key Benefits:- Direct OEM Replacement: Ensures exact fit and alignment with the heat exchanger and inducer housing for 16U06-compatible Lennox units.
- Enhanced Durability: Constructed from corrosion-resistant materials to handle the high-acidity condensate produced by 90%+ AFUE furnaces.
- Optimized Pressure Control: Maintains steady draft and proper pressure switch operation, preventing nuisance furnace trips.
- Integrated Condensate Management: Features precision-molded drain connections to facilitate the seamless removal of moisture from the flue gas.
- Complete Header Kit: Simplifies the replacement process by providing the core 619598-06 assembly needed for a professional-grade installation.
How do I know if my Lennox collector box is cracked?
Inspect the exterior of the box for white, crusty mineral deposits or visible water stains. Often, a small hairline crack will cause the pressure switch to trip before you see a major leak.
Is the gasket included with the 16U06 kit?
Technicians should verify the specific kit contents; however, it is professional standard practice to replace or reseal the interface with high-temp RTV or the provided foam gasket to ensure a gastight seal.
Can a clogged collector box cause my inducer motor to fail?
Yes. If the drain ports in the collector box are blocked, condensate will back up into the inducer wheel, increasing the load on the motor and potentially shorting the internal electronics.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Lennox 16U06 Collector Box (also identified as model 619598-06) is a critical cold end header box kit designed for high-efficiency Lennox gas furnaces. Built to withstand the corrosive nature of acidic condensate, this OEM furnace collector box assembly manages the transition of combustion gases from the heat exchanger into the venting system. As a veteran technician knows, maintaining a precise furnace pressure switch signal and proper condensate drainage depends entirely on the structural integrity of this box. Cracks or seal failures in this component will lead to pressure fluctuations, causing intermittent furnace ignition failure or total system lockout.
This kit is engineered for specific condensing furnace models and includes the necessary hardware to ensure a gastight seal at the cold end of the heat exchanger. When performing a Lennox furnace repair, verify that the internal baffles and drain ports are clear to prevent water backup into the inducer motor. This OEM replacement part ensures your draft remains stable and your combustion process stays within manufacturer specifications for peak performance and safety.
Key Benefits:- Direct OEM Replacement: Ensures exact fit and alignment with the heat exchanger and inducer housing for 16U06-compatible Lennox units.
- Enhanced Durability: Constructed from corrosion-resistant materials to handle the high-acidity condensate produced by 90%+ AFUE furnaces.
- Optimized Pressure Control: Maintains steady draft and proper pressure switch operation, preventing nuisance furnace trips.
- Integrated Condensate Management: Features precision-molded drain connections to facilitate the seamless removal of moisture from the flue gas.
- Complete Header Kit: Simplifies the replacement process by providing the core 619598-06 assembly needed for a professional-grade installation.
How do I know if my Lennox collector box is cracked?
Inspect the exterior of the box for white, crusty mineral deposits or visible water stains. Often, a small hairline crack will cause the pressure switch to trip before you see a major leak.
Is the gasket included with the 16U06 kit?
Technicians should verify the specific kit contents; however, it is professional standard practice to replace or reseal the interface with high-temp RTV or the provided foam gasket to ensure a gastight seal.
Can a clogged collector box cause my inducer motor to fail?
Yes. If the drain ports in the collector box are blocked, condensate will back up into the inducer wheel, increasing the load on the motor and potentially shorting the internal electronics.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
