Lennox 10F83 Sensor
The Lennox 10F83 Mixed Air Thermistor Sensor is a critical NTC 3K Ohm thermistor designed for precision temperature monitoring in commercial rooftop units and split systems. This HVAC discharge air temperature sensor provides real-time feedback to the Lennox Prodigy Control System or M-Series controllers, allowing for accurate Economizer logic and discharge air reset configurations. Engineered for durability in high-airflow environments, the 10F83 sensor ensures the building automation system maintains optimal setpoints by measuring mixed air temperature before it hits the coils. This prevents compressor short-cycling and optimizes cooling stages by utilizing outdoor air when ambient conditions allow. As a direct OEM Lennox replacement part, it features the standard 2-wire lead configuration for seamless integration into existing Lennox thermal sensing circuits, ensuring the L-Series or Strategos units operate within specified thermal parameters without the drift common in generic aftermarket alternatives.
Key Technical Benefits
- Precise Resistance Mapping: Calibrated 3K Ohm resistance at 77°F (25°C) for high-accuracy signal input to the main control board.
- Enhanced System Logic: Essential for Economizer enthalpy control, allowing the unit to maximize free cooling and reduce mechanical wear.
- Field Reliability: Built to withstand moisture and vibration within the mixed air plenum, reducing calls for sensor failure alarms.
- Direct OEM Compatibility: Ensures the correct voltage drop is communicated to the controller, maintaining factory-spec performance in Lennox HVAC systems.
Common Contractor Questions
How do I test the Lennox 10F83 for accuracy?
Disconnect the sensor and use a multimeter to check the resistance across the leads. At 77°F, you should read approximately 3,000 ohms. Compare your reading to a standard 3K NTC thermistor chart to verify calibration.
Can I use this as a discharge air sensor?
Yes, the 10F83 is commonly used as both a mixed air sensor and a discharge air sensor in various Lennox configurations, provided the controller is programmed to recognize the 3K Ohm input.
What causes these sensors to fail?
Exposure to high humidity or physical damage from debris in the airstream are the primary causes. If the unit is showing an "Open Sensor" or "Shorted Sensor" fault code on the Prodigy board, the 10F83 should be the first component inspected.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $54.33
-65%$54.33
$19.02Lennox 10F83 Sensor
The Lennox 10F83 Mixed Air Thermistor Sensor is a critical NTC 3K Ohm thermistor designed for precision temperature monitoring in commercial rooftop units and split systems. This HVAC discharge air temperature sensor provides real-time feedback to the Lennox Prodigy Control System or M-Series controllers, allowing for accurate Economizer logic and discharge air reset configurations. Engineered for durability in high-airflow environments, the 10F83 sensor ensures the building automation system maintains optimal setpoints by measuring mixed air temperature before it hits the coils. This prevents compressor short-cycling and optimizes cooling stages by utilizing outdoor air when ambient conditions allow. As a direct OEM Lennox replacement part, it features the standard 2-wire lead configuration for seamless integration into existing Lennox thermal sensing circuits, ensuring the L-Series or Strategos units operate within specified thermal parameters without the drift common in generic aftermarket alternatives.
Key Technical Benefits
- Precise Resistance Mapping: Calibrated 3K Ohm resistance at 77°F (25°C) for high-accuracy signal input to the main control board.
- Enhanced System Logic: Essential for Economizer enthalpy control, allowing the unit to maximize free cooling and reduce mechanical wear.
- Field Reliability: Built to withstand moisture and vibration within the mixed air plenum, reducing calls for sensor failure alarms.
- Direct OEM Compatibility: Ensures the correct voltage drop is communicated to the controller, maintaining factory-spec performance in Lennox HVAC systems.
Common Contractor Questions
How do I test the Lennox 10F83 for accuracy?
Disconnect the sensor and use a multimeter to check the resistance across the leads. At 77°F, you should read approximately 3,000 ohms. Compare your reading to a standard 3K NTC thermistor chart to verify calibration.
Can I use this as a discharge air sensor?
Yes, the 10F83 is commonly used as both a mixed air sensor and a discharge air sensor in various Lennox configurations, provided the controller is programmed to recognize the 3K Ohm input.
What causes these sensors to fail?
Exposure to high humidity or physical damage from debris in the airstream are the primary causes. If the unit is showing an "Open Sensor" or "Shorted Sensor" fault code on the Prodigy board, the 10F83 should be the first component inspected.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Lennox 10F83 Mixed Air Thermistor Sensor is a critical NTC 3K Ohm thermistor designed for precision temperature monitoring in commercial rooftop units and split systems. This HVAC discharge air temperature sensor provides real-time feedback to the Lennox Prodigy Control System or M-Series controllers, allowing for accurate Economizer logic and discharge air reset configurations. Engineered for durability in high-airflow environments, the 10F83 sensor ensures the building automation system maintains optimal setpoints by measuring mixed air temperature before it hits the coils. This prevents compressor short-cycling and optimizes cooling stages by utilizing outdoor air when ambient conditions allow. As a direct OEM Lennox replacement part, it features the standard 2-wire lead configuration for seamless integration into existing Lennox thermal sensing circuits, ensuring the L-Series or Strategos units operate within specified thermal parameters without the drift common in generic aftermarket alternatives.
Key Technical Benefits
- Precise Resistance Mapping: Calibrated 3K Ohm resistance at 77°F (25°C) for high-accuracy signal input to the main control board.
- Enhanced System Logic: Essential for Economizer enthalpy control, allowing the unit to maximize free cooling and reduce mechanical wear.
- Field Reliability: Built to withstand moisture and vibration within the mixed air plenum, reducing calls for sensor failure alarms.
- Direct OEM Compatibility: Ensures the correct voltage drop is communicated to the controller, maintaining factory-spec performance in Lennox HVAC systems.
Common Contractor Questions
How do I test the Lennox 10F83 for accuracy?
Disconnect the sensor and use a multimeter to check the resistance across the leads. At 77°F, you should read approximately 3,000 ohms. Compare your reading to a standard 3K NTC thermistor chart to verify calibration.
Can I use this as a discharge air sensor?
Yes, the 10F83 is commonly used as both a mixed air sensor and a discharge air sensor in various Lennox configurations, provided the controller is programmed to recognize the 3K Ohm input.
What causes these sensors to fail?
Exposure to high humidity or physical damage from debris in the airstream are the primary causes. If the unit is showing an "Open Sensor" or "Shorted Sensor" fault code on the Prodigy board, the 10F83 should be the first component inspected.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
