Lau 38209601 Shaft
The Lau 38209601 Shaft is a precision-engineered blower shaft replacement designed for high-demand belt drive blower assemblies. Fabricated from solid 1018 cold rolled steel, this 3/4" diameter shaft provides the structural rigidity required to maintain alignment in centrifugal fan systems. The 20" length is optimized for standard air handler configurations, though it can be field-cut to meet specific dimensional requirements for residential or commercial HVAC units.
For veteran technicians, the polished finish of this 38209601 Lau shaft ensures a smooth interface with sleeve bearings or ball bearings, significantly reducing friction-induced heat. Replacing a scored or pitted shaft is a critical preventative measure; installing new bearings on a damaged 3/4 inch motor shaft leads to premature failure and increased vibration. This component is compatible with various Lau-Conair blower models, offering a standard fit for pulleys and sheaves used in HVAC ventilation systems.
Key Benefits- Durable Construction: Made from 1018 cold rolled steel for superior torque resistance and longevity.
- Precision Tolerance: Ground and polished surface ensures exact fit with 3/4" bore bearings and pulleys.
- Versatile Application: Standard 20" length suitable for various belt-driven blowers, including A9 and A10 series.
- Field Adaptable: Solid steel design allows for custom trimming and the addition of keyways or flats as required onsite.
Can I use this shaft if my original part is shorter than 20 inches?
Yes. This solid steel shaft can be cut down to the exact length of your existing blower shaft using standard metal-cutting tools. Always deburr the ends before installation.
Does this shaft come with pre-cut keyways?
The Lau 38209601 is a solid, smooth shaft. Keyways or flats must be added in the field by the technician based on the specific hardware requirements of the blower wheel or pulley being used.
Should I replace the bearings when I replace this shaft?
It is standard industry practice to replace bearings alongside the blower shaft. A worn shaft often indicates bearing failure, and using old bearings on a new polished 1018 shaft can cause immediate scoring.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $43.00
-65%$43.00
$15.05Lau 38209601 Shaft
The Lau 38209601 Shaft is a precision-engineered blower shaft replacement designed for high-demand belt drive blower assemblies. Fabricated from solid 1018 cold rolled steel, this 3/4" diameter shaft provides the structural rigidity required to maintain alignment in centrifugal fan systems. The 20" length is optimized for standard air handler configurations, though it can be field-cut to meet specific dimensional requirements for residential or commercial HVAC units.
For veteran technicians, the polished finish of this 38209601 Lau shaft ensures a smooth interface with sleeve bearings or ball bearings, significantly reducing friction-induced heat. Replacing a scored or pitted shaft is a critical preventative measure; installing new bearings on a damaged 3/4 inch motor shaft leads to premature failure and increased vibration. This component is compatible with various Lau-Conair blower models, offering a standard fit for pulleys and sheaves used in HVAC ventilation systems.
Key Benefits- Durable Construction: Made from 1018 cold rolled steel for superior torque resistance and longevity.
- Precision Tolerance: Ground and polished surface ensures exact fit with 3/4" bore bearings and pulleys.
- Versatile Application: Standard 20" length suitable for various belt-driven blowers, including A9 and A10 series.
- Field Adaptable: Solid steel design allows for custom trimming and the addition of keyways or flats as required onsite.
Can I use this shaft if my original part is shorter than 20 inches?
Yes. This solid steel shaft can be cut down to the exact length of your existing blower shaft using standard metal-cutting tools. Always deburr the ends before installation.
Does this shaft come with pre-cut keyways?
The Lau 38209601 is a solid, smooth shaft. Keyways or flats must be added in the field by the technician based on the specific hardware requirements of the blower wheel or pulley being used.
Should I replace the bearings when I replace this shaft?
It is standard industry practice to replace bearings alongside the blower shaft. A worn shaft often indicates bearing failure, and using old bearings on a new polished 1018 shaft can cause immediate scoring.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Lau 38209601 Shaft is a precision-engineered blower shaft replacement designed for high-demand belt drive blower assemblies. Fabricated from solid 1018 cold rolled steel, this 3/4" diameter shaft provides the structural rigidity required to maintain alignment in centrifugal fan systems. The 20" length is optimized for standard air handler configurations, though it can be field-cut to meet specific dimensional requirements for residential or commercial HVAC units.
For veteran technicians, the polished finish of this 38209601 Lau shaft ensures a smooth interface with sleeve bearings or ball bearings, significantly reducing friction-induced heat. Replacing a scored or pitted shaft is a critical preventative measure; installing new bearings on a damaged 3/4 inch motor shaft leads to premature failure and increased vibration. This component is compatible with various Lau-Conair blower models, offering a standard fit for pulleys and sheaves used in HVAC ventilation systems.
Key Benefits- Durable Construction: Made from 1018 cold rolled steel for superior torque resistance and longevity.
- Precision Tolerance: Ground and polished surface ensures exact fit with 3/4" bore bearings and pulleys.
- Versatile Application: Standard 20" length suitable for various belt-driven blowers, including A9 and A10 series.
- Field Adaptable: Solid steel design allows for custom trimming and the addition of keyways or flats as required onsite.
Can I use this shaft if my original part is shorter than 20 inches?
Yes. This solid steel shaft can be cut down to the exact length of your existing blower shaft using standard metal-cutting tools. Always deburr the ends before installation.
Does this shaft come with pre-cut keyways?
The Lau 38209601 is a solid, smooth shaft. Keyways or flats must be added in the field by the technician based on the specific hardware requirements of the blower wheel or pulley being used.
Should I replace the bearings when I replace this shaft?
It is standard industry practice to replace bearings alongside the blower shaft. A worn shaft often indicates bearing failure, and using old bearings on a new polished 1018 shaft can cause immediate scoring.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
