IO Hvac Controls ZP6 Control Panel
As a veteran contractor, you know that simplifying complex zoning is the key to a profitable install. The iO HVAC Controls ZP6 Control Panel is a high-performance 6-zone controller designed for both residential and light commercial applications. This universal 3H/2C zone panel is compatible with single-stage, multi-stage, heat pump, and dual fuel systems, providing the ultimate flexibility for diverse equipment setups. With intuitive slide switch configuration, you can quickly set up your staging and system parameters without a complex programming interface. The ZP6 is also built for growth, allowing you to expand from 6 to 12 zones using 3-zone expansion modules. Standardized firmware enables auto changeover and includes LED status indication for rapid diagnostics of damper positions and equipment calls. Furthermore, the on-board adjustable high and low discharge air limits, paired with outdoor balance points, protect the compressor and heat exchanger while maximizing efficiency across all forced air zoning applications.
Key Benefits for Technicians- Universal Compatibility: Seamlessly integrates with conventional, heat pump, and dual fuel HVAC systems with up to 3 stages of heating and 2 stages of cooling.
- Scalable Architecture: Start with a 6-zone control panel and expand up to 12 zones, making it ideal for large residential or light commercial footprints.
- Advanced Capacity Control: Features staging via zone thermostat, an adjustable upstage timer, or capacity control based on the number of zones calling.
- Integrated Protection: Includes purge cycle options and adjustable high/low limits to prevent coil freezing and overheating, ensuring long-term system reliability.
- Flexible Damper Control: Fully supports both 2-wire and 3-wire zone dampers, allowing you to use existing inventory or preferred damper brands.
How do I configure the ZP6 for a dual fuel system?
The ZP6 features a built-in fossil fuel option. When a zone thermostat calls for auxiliary heat in dual fuel mode, the panel automatically locks out the heat pump compressor and initiates the fossil fuel furnace as the primary heat source until the call is satisfied.
Can I use single-stage thermostats with multi-stage equipment?
Yes. The iO HVAC Controls ZP6 includes an adjustable on-board staging timer, allowing you to utilize single-stage thermostats while still taking advantage of the multi-stage capabilities of the air handler or condenser.
What type of discharge air sensor does this panel require?
This panel is designed to work with a 10k Ohm NTC discharge air temperature sensor (ZPA-DTS). This sensor is critical for monitoring high and low limits to protect the HVAC equipment during low-airflow conditions.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $525.53
-65%$525.53
$183.94IO Hvac Controls ZP6 Control Panel
As a veteran contractor, you know that simplifying complex zoning is the key to a profitable install. The iO HVAC Controls ZP6 Control Panel is a high-performance 6-zone controller designed for both residential and light commercial applications. This universal 3H/2C zone panel is compatible with single-stage, multi-stage, heat pump, and dual fuel systems, providing the ultimate flexibility for diverse equipment setups. With intuitive slide switch configuration, you can quickly set up your staging and system parameters without a complex programming interface. The ZP6 is also built for growth, allowing you to expand from 6 to 12 zones using 3-zone expansion modules. Standardized firmware enables auto changeover and includes LED status indication for rapid diagnostics of damper positions and equipment calls. Furthermore, the on-board adjustable high and low discharge air limits, paired with outdoor balance points, protect the compressor and heat exchanger while maximizing efficiency across all forced air zoning applications.
Key Benefits for Technicians- Universal Compatibility: Seamlessly integrates with conventional, heat pump, and dual fuel HVAC systems with up to 3 stages of heating and 2 stages of cooling.
- Scalable Architecture: Start with a 6-zone control panel and expand up to 12 zones, making it ideal for large residential or light commercial footprints.
- Advanced Capacity Control: Features staging via zone thermostat, an adjustable upstage timer, or capacity control based on the number of zones calling.
- Integrated Protection: Includes purge cycle options and adjustable high/low limits to prevent coil freezing and overheating, ensuring long-term system reliability.
- Flexible Damper Control: Fully supports both 2-wire and 3-wire zone dampers, allowing you to use existing inventory or preferred damper brands.
How do I configure the ZP6 for a dual fuel system?
The ZP6 features a built-in fossil fuel option. When a zone thermostat calls for auxiliary heat in dual fuel mode, the panel automatically locks out the heat pump compressor and initiates the fossil fuel furnace as the primary heat source until the call is satisfied.
Can I use single-stage thermostats with multi-stage equipment?
Yes. The iO HVAC Controls ZP6 includes an adjustable on-board staging timer, allowing you to utilize single-stage thermostats while still taking advantage of the multi-stage capabilities of the air handler or condenser.
What type of discharge air sensor does this panel require?
This panel is designed to work with a 10k Ohm NTC discharge air temperature sensor (ZPA-DTS). This sensor is critical for monitoring high and low limits to protect the HVAC equipment during low-airflow conditions.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
As a veteran contractor, you know that simplifying complex zoning is the key to a profitable install. The iO HVAC Controls ZP6 Control Panel is a high-performance 6-zone controller designed for both residential and light commercial applications. This universal 3H/2C zone panel is compatible with single-stage, multi-stage, heat pump, and dual fuel systems, providing the ultimate flexibility for diverse equipment setups. With intuitive slide switch configuration, you can quickly set up your staging and system parameters without a complex programming interface. The ZP6 is also built for growth, allowing you to expand from 6 to 12 zones using 3-zone expansion modules. Standardized firmware enables auto changeover and includes LED status indication for rapid diagnostics of damper positions and equipment calls. Furthermore, the on-board adjustable high and low discharge air limits, paired with outdoor balance points, protect the compressor and heat exchanger while maximizing efficiency across all forced air zoning applications.
Key Benefits for Technicians- Universal Compatibility: Seamlessly integrates with conventional, heat pump, and dual fuel HVAC systems with up to 3 stages of heating and 2 stages of cooling.
- Scalable Architecture: Start with a 6-zone control panel and expand up to 12 zones, making it ideal for large residential or light commercial footprints.
- Advanced Capacity Control: Features staging via zone thermostat, an adjustable upstage timer, or capacity control based on the number of zones calling.
- Integrated Protection: Includes purge cycle options and adjustable high/low limits to prevent coil freezing and overheating, ensuring long-term system reliability.
- Flexible Damper Control: Fully supports both 2-wire and 3-wire zone dampers, allowing you to use existing inventory or preferred damper brands.
How do I configure the ZP6 for a dual fuel system?
The ZP6 features a built-in fossil fuel option. When a zone thermostat calls for auxiliary heat in dual fuel mode, the panel automatically locks out the heat pump compressor and initiates the fossil fuel furnace as the primary heat source until the call is satisfied.
Can I use single-stage thermostats with multi-stage equipment?
Yes. The iO HVAC Controls ZP6 includes an adjustable on-board staging timer, allowing you to utilize single-stage thermostats while still taking advantage of the multi-stage capabilities of the air handler or condenser.
What type of discharge air sensor does this panel require?
This panel is designed to work with a 10k Ohm NTC discharge air temperature sensor (ZPA-DTS). This sensor is critical for monitoring high and low limits to protect the HVAC equipment during low-airflow conditions.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
