IO Hvac Controls UT32-S2 Sensor
The iO HVAC Controls UT32-S2 is a professional-grade dual indoor remote sensor specifically engineered for integration with the UT32 Titan Series thermostat. Utilizing two high-precision 10K ohm thermistors wired in series, this sensor allows for accurate temperature monitoring in remote zones, effectively overriding or averaging with the thermostat's internal sensor. For contractors managing large residential or light commercial layouts, the UT32-S2 remote sensor is essential for eliminating hot or cold spots by placing the sensing logic in the actual occupied space rather than a hallway or utility closet. When connected, the iO HVAC UT32-S2 automatically disables the thermostat's onboard sensing to ensure the control board receives the most relevant thermal data. The low-profile design and simple 2-wire lead installation make it a reliable choice for temperature averaging applications where multiple sensors are networked to provide a balanced environmental reading across expansive floor plans.
Key Benefits:- Dual Thermistor Logic: Features two 10K NTC Type 2 sensors wired in series for enhanced accuracy in remote temperature monitoring.
- Seamless Integration: Purpose-built for the iO HVAC Controls UT32 and T-32-P series thermostats, ensuring plug-and-play compatibility.
- Temperature Averaging: Supports complex wiring configurations with T-S1 sensors to achieve a balanced 10K ohm signal for large-scale HVAC zone control.
- Discreet Installation: The small footprint allows for placement in master suites or conference rooms without disrupting interior aesthetics.
- System Optimization: Prevents short-cycling by providing the thermostat with real-time data from the areas that matter most to occupant comfort.
How do I wire the UT32-S2 for temperature averaging?
For temperature averaging, the UT32-S2 (dual sensor) is typically used in combination with T-S1 (single 10K) sensors to maintain a total resistance of 10K ohms. Refer to the UT32 wiring diagram to ensure the series/parallel configuration matches the thermostat's input requirements.
Will this sensor work with other thermostat brands?
The iO HVAC UT32-S2 is specifically calibrated for the resistance curves of the Titan and Comfort System series. While it uses standard 10K thermistors, it is highly recommended to use it only with compatible iO HVAC thermostats to ensure accurate HVAC sensor calibration.
Where is the best location to install a remote sensor?
Mount the sensor on an interior wall approximately 5 feet above the floor. Avoid areas with direct sunlight, drafts from windows, or proximity to supply air registers to prevent false temperature readings.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $39.70
-65%$39.70
$13.89IO Hvac Controls UT32-S2 Sensor
The iO HVAC Controls UT32-S2 is a professional-grade dual indoor remote sensor specifically engineered for integration with the UT32 Titan Series thermostat. Utilizing two high-precision 10K ohm thermistors wired in series, this sensor allows for accurate temperature monitoring in remote zones, effectively overriding or averaging with the thermostat's internal sensor. For contractors managing large residential or light commercial layouts, the UT32-S2 remote sensor is essential for eliminating hot or cold spots by placing the sensing logic in the actual occupied space rather than a hallway or utility closet. When connected, the iO HVAC UT32-S2 automatically disables the thermostat's onboard sensing to ensure the control board receives the most relevant thermal data. The low-profile design and simple 2-wire lead installation make it a reliable choice for temperature averaging applications where multiple sensors are networked to provide a balanced environmental reading across expansive floor plans.
Key Benefits:- Dual Thermistor Logic: Features two 10K NTC Type 2 sensors wired in series for enhanced accuracy in remote temperature monitoring.
- Seamless Integration: Purpose-built for the iO HVAC Controls UT32 and T-32-P series thermostats, ensuring plug-and-play compatibility.
- Temperature Averaging: Supports complex wiring configurations with T-S1 sensors to achieve a balanced 10K ohm signal for large-scale HVAC zone control.
- Discreet Installation: The small footprint allows for placement in master suites or conference rooms without disrupting interior aesthetics.
- System Optimization: Prevents short-cycling by providing the thermostat with real-time data from the areas that matter most to occupant comfort.
How do I wire the UT32-S2 for temperature averaging?
For temperature averaging, the UT32-S2 (dual sensor) is typically used in combination with T-S1 (single 10K) sensors to maintain a total resistance of 10K ohms. Refer to the UT32 wiring diagram to ensure the series/parallel configuration matches the thermostat's input requirements.
Will this sensor work with other thermostat brands?
The iO HVAC UT32-S2 is specifically calibrated for the resistance curves of the Titan and Comfort System series. While it uses standard 10K thermistors, it is highly recommended to use it only with compatible iO HVAC thermostats to ensure accurate HVAC sensor calibration.
Where is the best location to install a remote sensor?
Mount the sensor on an interior wall approximately 5 feet above the floor. Avoid areas with direct sunlight, drafts from windows, or proximity to supply air registers to prevent false temperature readings.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The iO HVAC Controls UT32-S2 is a professional-grade dual indoor remote sensor specifically engineered for integration with the UT32 Titan Series thermostat. Utilizing two high-precision 10K ohm thermistors wired in series, this sensor allows for accurate temperature monitoring in remote zones, effectively overriding or averaging with the thermostat's internal sensor. For contractors managing large residential or light commercial layouts, the UT32-S2 remote sensor is essential for eliminating hot or cold spots by placing the sensing logic in the actual occupied space rather than a hallway or utility closet. When connected, the iO HVAC UT32-S2 automatically disables the thermostat's onboard sensing to ensure the control board receives the most relevant thermal data. The low-profile design and simple 2-wire lead installation make it a reliable choice for temperature averaging applications where multiple sensors are networked to provide a balanced environmental reading across expansive floor plans.
Key Benefits:- Dual Thermistor Logic: Features two 10K NTC Type 2 sensors wired in series for enhanced accuracy in remote temperature monitoring.
- Seamless Integration: Purpose-built for the iO HVAC Controls UT32 and T-32-P series thermostats, ensuring plug-and-play compatibility.
- Temperature Averaging: Supports complex wiring configurations with T-S1 sensors to achieve a balanced 10K ohm signal for large-scale HVAC zone control.
- Discreet Installation: The small footprint allows for placement in master suites or conference rooms without disrupting interior aesthetics.
- System Optimization: Prevents short-cycling by providing the thermostat with real-time data from the areas that matter most to occupant comfort.
How do I wire the UT32-S2 for temperature averaging?
For temperature averaging, the UT32-S2 (dual sensor) is typically used in combination with T-S1 (single 10K) sensors to maintain a total resistance of 10K ohms. Refer to the UT32 wiring diagram to ensure the series/parallel configuration matches the thermostat's input requirements.
Will this sensor work with other thermostat brands?
The iO HVAC UT32-S2 is specifically calibrated for the resistance curves of the Titan and Comfort System series. While it uses standard 10K thermistors, it is highly recommended to use it only with compatible iO HVAC thermostats to ensure accurate HVAC sensor calibration.
Where is the best location to install a remote sensor?
Mount the sensor on an interior wall approximately 5 feet above the floor. Avoid areas with direct sunlight, drafts from windows, or proximity to supply air registers to prevent false temperature readings.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
