IO Hvac Controls iO-WW1 Alarm System
The iO-WW1 Warning Watchdog is a professional-grade condensing unit alarm system designed for veteran HVACR contractors to safeguard outdoor assets against theft, vandalism, and refrigerant discharge. This hardwired logic panel provides a comprehensive security solution by monitoring the physical and electrical integrity of the system. The iO-WW1 kit includes a hardwired logic panel, iO-WWPS power supply (12V DC), iO-WWS siren (118dB output), iO-WWR240 voltage monitoring relay, and iO-WWPC pressure control. Engineered for air conditioner theft prevention, the system triggers a 118dB siren if the refrigerant circuit is breached, the electrical disconnect is pulled, or the control wiring is severed. It is compatible with both split systems and packaged rooftop units, offering the capability to monitor up to four condensing units from a single control panel via 18-2 gauge thermostat wiring. Technical features include an integrated siren cut-off timer and a logic panel silence switch, ensuring rapid diagnostic response without prolonged noise pollution after the security event is managed.
Key Benefits- Multi-Unit Monitoring: Single-panel logic can supervise up to four separate condensing units by wiring additional voltage monitoring relays and pressure controls in series.
- Universal Compatibility: The iO-WWR240 relay supports 208V/240V single-phase or 3-phase equipment, making it an ideal choice for both residential and light commercial HVAC security.
- Fail-Safe Pressure Sensing: The iO-WWPC pressure control monitors the liquid line via the Schrader valve service port, opening the loop if pressure falls below 10 PSI to detect refrigerant loss instantly.
- Auxiliary Integration: Features built-in dry contacts (N.O./N.C.) to interface with central alarm systems, phone dialers, or building management systems (BMS) for remote notification.
- Tamper Detection: Triggers an alarm condition immediately if the 18-gauge HVAC security wiring is cut or the logic panel detects an open loop circuit.
How do I wire the iO-WW1 to monitor more than one unit?
To expand the system, install additional iO-WWR240 relays and iO-WWPC pressure switches at each outdoor unit. Wire the 18-2 thermostat control leads in a continuous series loop back to the indoor logic panel terminals.
Will the alarm trigger during a standard power outage?
The system is designed with logic to prevent false alarms during utility power interruptions. When power is restored, the green system ready LED will illuminate, and the panel will automatically re-arm without sounding the siren.
Where should the iO-WWPC pressure control be mounted?
The encapsulated pressure control must be mounted directly onto the liquid line Schrader valve service port within the condensing unit cabinet. Ensure all control wiring is secured to the line set with tie straps to prevent mechanical interference with fan blades.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
IO Hvac Controls iO-WW1 Alarm System
The iO-WW1 Warning Watchdog is a professional-grade condensing unit alarm system designed for veteran HVACR contractors to safeguard outdoor assets against theft, vandalism, and refrigerant discharge. This hardwired logic panel provides a comprehensive security solution by monitoring the physical and electrical integrity of the system. The iO-WW1 kit includes a hardwired logic panel, iO-WWPS power supply (12V DC), iO-WWS siren (118dB output), iO-WWR240 voltage monitoring relay, and iO-WWPC pressure control. Engineered for air conditioner theft prevention, the system triggers a 118dB siren if the refrigerant circuit is breached, the electrical disconnect is pulled, or the control wiring is severed. It is compatible with both split systems and packaged rooftop units, offering the capability to monitor up to four condensing units from a single control panel via 18-2 gauge thermostat wiring. Technical features include an integrated siren cut-off timer and a logic panel silence switch, ensuring rapid diagnostic response without prolonged noise pollution after the security event is managed.
Key Benefits- Multi-Unit Monitoring: Single-panel logic can supervise up to four separate condensing units by wiring additional voltage monitoring relays and pressure controls in series.
- Universal Compatibility: The iO-WWR240 relay supports 208V/240V single-phase or 3-phase equipment, making it an ideal choice for both residential and light commercial HVAC security.
- Fail-Safe Pressure Sensing: The iO-WWPC pressure control monitors the liquid line via the Schrader valve service port, opening the loop if pressure falls below 10 PSI to detect refrigerant loss instantly.
- Auxiliary Integration: Features built-in dry contacts (N.O./N.C.) to interface with central alarm systems, phone dialers, or building management systems (BMS) for remote notification.
- Tamper Detection: Triggers an alarm condition immediately if the 18-gauge HVAC security wiring is cut or the logic panel detects an open loop circuit.
How do I wire the iO-WW1 to monitor more than one unit?
To expand the system, install additional iO-WWR240 relays and iO-WWPC pressure switches at each outdoor unit. Wire the 18-2 thermostat control leads in a continuous series loop back to the indoor logic panel terminals.
Will the alarm trigger during a standard power outage?
The system is designed with logic to prevent false alarms during utility power interruptions. When power is restored, the green system ready LED will illuminate, and the panel will automatically re-arm without sounding the siren.
Where should the iO-WWPC pressure control be mounted?
The encapsulated pressure control must be mounted directly onto the liquid line Schrader valve service port within the condensing unit cabinet. Ensure all control wiring is secured to the line set with tie straps to prevent mechanical interference with fan blades.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The iO-WW1 Warning Watchdog is a professional-grade condensing unit alarm system designed for veteran HVACR contractors to safeguard outdoor assets against theft, vandalism, and refrigerant discharge. This hardwired logic panel provides a comprehensive security solution by monitoring the physical and electrical integrity of the system. The iO-WW1 kit includes a hardwired logic panel, iO-WWPS power supply (12V DC), iO-WWS siren (118dB output), iO-WWR240 voltage monitoring relay, and iO-WWPC pressure control. Engineered for air conditioner theft prevention, the system triggers a 118dB siren if the refrigerant circuit is breached, the electrical disconnect is pulled, or the control wiring is severed. It is compatible with both split systems and packaged rooftop units, offering the capability to monitor up to four condensing units from a single control panel via 18-2 gauge thermostat wiring. Technical features include an integrated siren cut-off timer and a logic panel silence switch, ensuring rapid diagnostic response without prolonged noise pollution after the security event is managed.
Key Benefits- Multi-Unit Monitoring: Single-panel logic can supervise up to four separate condensing units by wiring additional voltage monitoring relays and pressure controls in series.
- Universal Compatibility: The iO-WWR240 relay supports 208V/240V single-phase or 3-phase equipment, making it an ideal choice for both residential and light commercial HVAC security.
- Fail-Safe Pressure Sensing: The iO-WWPC pressure control monitors the liquid line via the Schrader valve service port, opening the loop if pressure falls below 10 PSI to detect refrigerant loss instantly.
- Auxiliary Integration: Features built-in dry contacts (N.O./N.C.) to interface with central alarm systems, phone dialers, or building management systems (BMS) for remote notification.
- Tamper Detection: Triggers an alarm condition immediately if the 18-gauge HVAC security wiring is cut or the logic panel detects an open loop circuit.
How do I wire the iO-WW1 to monitor more than one unit?
To expand the system, install additional iO-WWR240 relays and iO-WWPC pressure switches at each outdoor unit. Wire the 18-2 thermostat control leads in a continuous series loop back to the indoor logic panel terminals.
Will the alarm trigger during a standard power outage?
The system is designed with logic to prevent false alarms during utility power interruptions. When power is restored, the green system ready LED will illuminate, and the panel will automatically re-arm without sounding the siren.
Where should the iO-WWPC pressure control be mounted?
The encapsulated pressure control must be mounted directly onto the liquid line Schrader valve service port within the condensing unit cabinet. Ensure all control wiring is secured to the line set with tie straps to prevent mechanical interference with fan blades.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
