ICM Controls ICM2916 Board
The ICM2916 ignition control board is a high-performance, automated gas ignition solution engineered specifically as a form, fit, and functional replacement for the Trane D674712P02 and CNT7230. Designed for demanding Direct Spark Ignition (DSI) applications, this board provides comprehensive management of the furnace ignition sequence, overseeing the inducer motor, pressure switch, spark electrode, and gas valve. It maintains critical system safety by continuously monitoring high-limit, roll-out, and auxiliary limit switch circuits. Professionals rely on the ICM2916 for its selectable heat/cool blower off-delay settings and onboard LED diagnostics, which utilize specific flash codes to streamline site troubleshooting. Built to handle 230/240 VAC line voltage and a 0.75 uA minimum flame signal threshold, this DSI replacement board ensures reliable flame sensing and prevents short cycling. By integrating the ICM2916 furnace control into your service routine, you ensure precise timing for pre-purge and post-purge cycles while protecting the unit from repeated ignition failures through a secure soft lockout mode.
Key Benefits for Technicians- Direct replacement compatibility for Trane D674712P02 and CNT7230 OEM boards, ensuring seamless mechanical and electrical integration.
- Onboard diagnostic LEDs provide immediate system status and fault code identification to reduce diagnostic time in the field.
- Advanced safety monitoring of limit and roll-out switches prevents hazardous operation during component failure.
- Selectable blower off-delay allows for customized airflow management to optimize heat exchanger cooling and occupant comfort.
- Microprocessor-based control offers superior timing accuracy for the 20-second pre-purge and spark ignition trials compared to aging analog controls.
What does a fast flash LED signal indicate on the ICM2916?
A fast flash typically signifies a call for heat is present (24 VAC on the W terminal) and the board is operating within its normal heating sequence.
Can this board be used in 120V systems?
No, the ICM2916 is specifically rated for 230/240 VAC line voltage applications. Always verify the input voltage of the existing Trane unit before installation.
How does the board handle a "No Flame" condition?
If the flame sensor fails to detect a signal above 0.75 uA during the trial for ignition, the board will attempt a retry. Multiple failed attempts or flame losses within a single call for heat will trigger a one-hour soft lockout for safety.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
ICM Controls ICM2916 Board
The ICM2916 ignition control board is a high-performance, automated gas ignition solution engineered specifically as a form, fit, and functional replacement for the Trane D674712P02 and CNT7230. Designed for demanding Direct Spark Ignition (DSI) applications, this board provides comprehensive management of the furnace ignition sequence, overseeing the inducer motor, pressure switch, spark electrode, and gas valve. It maintains critical system safety by continuously monitoring high-limit, roll-out, and auxiliary limit switch circuits. Professionals rely on the ICM2916 for its selectable heat/cool blower off-delay settings and onboard LED diagnostics, which utilize specific flash codes to streamline site troubleshooting. Built to handle 230/240 VAC line voltage and a 0.75 uA minimum flame signal threshold, this DSI replacement board ensures reliable flame sensing and prevents short cycling. By integrating the ICM2916 furnace control into your service routine, you ensure precise timing for pre-purge and post-purge cycles while protecting the unit from repeated ignition failures through a secure soft lockout mode.
Key Benefits for Technicians- Direct replacement compatibility for Trane D674712P02 and CNT7230 OEM boards, ensuring seamless mechanical and electrical integration.
- Onboard diagnostic LEDs provide immediate system status and fault code identification to reduce diagnostic time in the field.
- Advanced safety monitoring of limit and roll-out switches prevents hazardous operation during component failure.
- Selectable blower off-delay allows for customized airflow management to optimize heat exchanger cooling and occupant comfort.
- Microprocessor-based control offers superior timing accuracy for the 20-second pre-purge and spark ignition trials compared to aging analog controls.
What does a fast flash LED signal indicate on the ICM2916?
A fast flash typically signifies a call for heat is present (24 VAC on the W terminal) and the board is operating within its normal heating sequence.
Can this board be used in 120V systems?
No, the ICM2916 is specifically rated for 230/240 VAC line voltage applications. Always verify the input voltage of the existing Trane unit before installation.
How does the board handle a "No Flame" condition?
If the flame sensor fails to detect a signal above 0.75 uA during the trial for ignition, the board will attempt a retry. Multiple failed attempts or flame losses within a single call for heat will trigger a one-hour soft lockout for safety.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The ICM2916 ignition control board is a high-performance, automated gas ignition solution engineered specifically as a form, fit, and functional replacement for the Trane D674712P02 and CNT7230. Designed for demanding Direct Spark Ignition (DSI) applications, this board provides comprehensive management of the furnace ignition sequence, overseeing the inducer motor, pressure switch, spark electrode, and gas valve. It maintains critical system safety by continuously monitoring high-limit, roll-out, and auxiliary limit switch circuits. Professionals rely on the ICM2916 for its selectable heat/cool blower off-delay settings and onboard LED diagnostics, which utilize specific flash codes to streamline site troubleshooting. Built to handle 230/240 VAC line voltage and a 0.75 uA minimum flame signal threshold, this DSI replacement board ensures reliable flame sensing and prevents short cycling. By integrating the ICM2916 furnace control into your service routine, you ensure precise timing for pre-purge and post-purge cycles while protecting the unit from repeated ignition failures through a secure soft lockout mode.
Key Benefits for Technicians- Direct replacement compatibility for Trane D674712P02 and CNT7230 OEM boards, ensuring seamless mechanical and electrical integration.
- Onboard diagnostic LEDs provide immediate system status and fault code identification to reduce diagnostic time in the field.
- Advanced safety monitoring of limit and roll-out switches prevents hazardous operation during component failure.
- Selectable blower off-delay allows for customized airflow management to optimize heat exchanger cooling and occupant comfort.
- Microprocessor-based control offers superior timing accuracy for the 20-second pre-purge and spark ignition trials compared to aging analog controls.
What does a fast flash LED signal indicate on the ICM2916?
A fast flash typically signifies a call for heat is present (24 VAC on the W terminal) and the board is operating within its normal heating sequence.
Can this board be used in 120V systems?
No, the ICM2916 is specifically rated for 230/240 VAC line voltage applications. Always verify the input voltage of the existing Trane unit before installation.
How does the board handle a "No Flame" condition?
If the flame sensor fails to detect a signal above 0.75 uA during the trial for ignition, the board will attempt a retry. Multiple failed attempts or flame losses within a single call for heat will trigger a one-hour soft lockout for safety.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
