Hydrotherm GX-82762 Flame Rod
The Hydrotherm GX-82762 Flame Rod is a critical OEM detection component designed for high-efficiency gas-fired systems, specifically engineered for the Hydrotherm GX Series modulating condensing boilers. As a veteran technician knows, maintaining a strong microamp signal is essential for the ignition controller to prove flame presence and prevent safety lockouts. This furnace flame sensor replacement utilizes precise flame rectification to signal the Sentry 2100 controller, ensuring the gas valve remains localized to active combustion rather than allowing unburned fuel accumulation. Built to withstand the intense thermal cycling of modulating boilers, the GX-82762 features a high-grade metallic probe and durable ceramic insulator to minimize carbon fouling and oxidation. Whether you are troubleshooting a Hydrotherm GX-150 or GX-200, this genuine boiler ignition part ensures a consistent 1 to 7 microamp DC current, effectively eliminating intermittent short-cycling issues caused by worn or corroded sensors in the burner path.
Key Benefits- Direct OEM Compatibility: Specifically designed for the Hydrotherm GX series, including GX-150, GX-200, and GX-400 condensing boilers.
- Optimized Flame Rectification: Ensures rapid and accurate flame sensing to prevent nuisance shutdowns and 3-hour lockout cycles.
- High-Temperature Durability: Engineered with robust alloys to resist the warping and soot buildup common in high-input gas-fired boilers.
- Reliable Safety Interface: Provides the necessary feedback for boilers and furnaces to maintain safe, efficient combustion sequences.
What are the symptoms of a failing Hydrotherm GX-82762?
The most common indicator is short-cycling: the burner ignites successfully but shuts down within 2 to 10 seconds. This occurs when the flame rod fails to conduct a sufficient microamp signal back to the control board, triggering a safety shut-off.
Can I clean the flame rod instead of replacing it?
While light oxidation can sometimes be removed with a fine abrasive pad, deep pitting or cracks in the ceramic insulator require a full flame sensor replacement to ensure the electrical path is not compromised.
How do I test the signal of this part?
Using a multimeter set to DC microamps (µA), place the meter in series with the flame rod lead. A healthy Hydrotherm system should typically show a steady reading between 2 and 5 microamps during the run cycle.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $126.09
-65%$126.09
$44.13Hydrotherm GX-82762 Flame Rod
The Hydrotherm GX-82762 Flame Rod is a critical OEM detection component designed for high-efficiency gas-fired systems, specifically engineered for the Hydrotherm GX Series modulating condensing boilers. As a veteran technician knows, maintaining a strong microamp signal is essential for the ignition controller to prove flame presence and prevent safety lockouts. This furnace flame sensor replacement utilizes precise flame rectification to signal the Sentry 2100 controller, ensuring the gas valve remains localized to active combustion rather than allowing unburned fuel accumulation. Built to withstand the intense thermal cycling of modulating boilers, the GX-82762 features a high-grade metallic probe and durable ceramic insulator to minimize carbon fouling and oxidation. Whether you are troubleshooting a Hydrotherm GX-150 or GX-200, this genuine boiler ignition part ensures a consistent 1 to 7 microamp DC current, effectively eliminating intermittent short-cycling issues caused by worn or corroded sensors in the burner path.
Key Benefits- Direct OEM Compatibility: Specifically designed for the Hydrotherm GX series, including GX-150, GX-200, and GX-400 condensing boilers.
- Optimized Flame Rectification: Ensures rapid and accurate flame sensing to prevent nuisance shutdowns and 3-hour lockout cycles.
- High-Temperature Durability: Engineered with robust alloys to resist the warping and soot buildup common in high-input gas-fired boilers.
- Reliable Safety Interface: Provides the necessary feedback for boilers and furnaces to maintain safe, efficient combustion sequences.
What are the symptoms of a failing Hydrotherm GX-82762?
The most common indicator is short-cycling: the burner ignites successfully but shuts down within 2 to 10 seconds. This occurs when the flame rod fails to conduct a sufficient microamp signal back to the control board, triggering a safety shut-off.
Can I clean the flame rod instead of replacing it?
While light oxidation can sometimes be removed with a fine abrasive pad, deep pitting or cracks in the ceramic insulator require a full flame sensor replacement to ensure the electrical path is not compromised.
How do I test the signal of this part?
Using a multimeter set to DC microamps (µA), place the meter in series with the flame rod lead. A healthy Hydrotherm system should typically show a steady reading between 2 and 5 microamps during the run cycle.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Hydrotherm GX-82762 Flame Rod is a critical OEM detection component designed for high-efficiency gas-fired systems, specifically engineered for the Hydrotherm GX Series modulating condensing boilers. As a veteran technician knows, maintaining a strong microamp signal is essential for the ignition controller to prove flame presence and prevent safety lockouts. This furnace flame sensor replacement utilizes precise flame rectification to signal the Sentry 2100 controller, ensuring the gas valve remains localized to active combustion rather than allowing unburned fuel accumulation. Built to withstand the intense thermal cycling of modulating boilers, the GX-82762 features a high-grade metallic probe and durable ceramic insulator to minimize carbon fouling and oxidation. Whether you are troubleshooting a Hydrotherm GX-150 or GX-200, this genuine boiler ignition part ensures a consistent 1 to 7 microamp DC current, effectively eliminating intermittent short-cycling issues caused by worn or corroded sensors in the burner path.
Key Benefits- Direct OEM Compatibility: Specifically designed for the Hydrotherm GX series, including GX-150, GX-200, and GX-400 condensing boilers.
- Optimized Flame Rectification: Ensures rapid and accurate flame sensing to prevent nuisance shutdowns and 3-hour lockout cycles.
- High-Temperature Durability: Engineered with robust alloys to resist the warping and soot buildup common in high-input gas-fired boilers.
- Reliable Safety Interface: Provides the necessary feedback for boilers and furnaces to maintain safe, efficient combustion sequences.
What are the symptoms of a failing Hydrotherm GX-82762?
The most common indicator is short-cycling: the burner ignites successfully but shuts down within 2 to 10 seconds. This occurs when the flame rod fails to conduct a sufficient microamp signal back to the control board, triggering a safety shut-off.
Can I clean the flame rod instead of replacing it?
While light oxidation can sometimes be removed with a fine abrasive pad, deep pitting or cracks in the ceramic insulator require a full flame sensor replacement to ensure the electrical path is not compromised.
How do I test the signal of this part?
Using a multimeter set to DC microamps (µA), place the meter in series with the flame rod lead. A healthy Hydrotherm system should typically show a steady reading between 2 and 5 microamps during the run cycle.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
