Hydrotherm 58-1837 Inducer Assembly
For veteran HVAC technicians, the Hydrotherm 58-1837 Inducer Assembly is a direct-fit replacement engineered to restore the integrity of the combustion cycle in high-efficiency systems. This heavy-duty draft inducer motor is critical for purging the heat exchanger of residual gases and establishing the negative pressure required to close the furnace pressure switch and initiate ignition. Operating at 115 VAC with a high-torque 3450 RPM output, this 150W assembly ensures consistent static pressure across the venting run, preventing the nuisance HVAC system lockout often caused by aging, seized bearings, or weakened motor windings. Specifically designed for compatibility with Hydrotherm boiler models 110, 120, 130, 140, 150, and 160, this unit features a precision-balanced blower wheel to minimize vibrational resonance and physical strain on the mounting bracket. When diagnosing a noisy inducer assembly or a motor that hums without turning, swapping in this OEM-spec 58-1837 assembly is the standard professional solution for maintaining peak thermal efficiency and safe manifold operation.
Key Benefits- Combustion Integrity: Maintains precise airflow volume to support optimal fuel-to-air ratios and reduce hazardous emissions.
- Drop-In Compatibility: Engineered for a seamless fit on Hydrotherm furnace models 110-160, eliminating the need for field modifications.
- Enhanced Reliability: The 115V inducer blower utilizes robust internal components to withstand the high-heat environment of the furnace cabinet.
- Rapid Ignition: Rated at 3450 RPM to quickly establish the draft needed to trigger the ignition sequence without delay.
What are the signs that my Hydrotherm inducer assembly is failing?
Contractors typically look for a high-pitched screeching (bearing failure), a heavy vibration during the pre-purge cycle, or a furnace pressure switch that fails to close despite receiving a call for heat.
Does this assembly include the necessary mounting hardware?
This is the complete inducer assembly; however, we recommend inspecting the existing draft inducer gasket or applying high-temp RTV silicone during installation to ensure a gas-tight seal against the collector box.
Can I use this motor to replace a generic draft inducer?
The Hydrotherm 58-1837 is technical-spec specific. Verify your boiler's SKU 58-1837 or model number to ensure the electrical leads and mounting points align with your specific cabinet configuration.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $731.06
-65%$731.06
$255.87Hydrotherm 58-1837 Inducer Assembly
For veteran HVAC technicians, the Hydrotherm 58-1837 Inducer Assembly is a direct-fit replacement engineered to restore the integrity of the combustion cycle in high-efficiency systems. This heavy-duty draft inducer motor is critical for purging the heat exchanger of residual gases and establishing the negative pressure required to close the furnace pressure switch and initiate ignition. Operating at 115 VAC with a high-torque 3450 RPM output, this 150W assembly ensures consistent static pressure across the venting run, preventing the nuisance HVAC system lockout often caused by aging, seized bearings, or weakened motor windings. Specifically designed for compatibility with Hydrotherm boiler models 110, 120, 130, 140, 150, and 160, this unit features a precision-balanced blower wheel to minimize vibrational resonance and physical strain on the mounting bracket. When diagnosing a noisy inducer assembly or a motor that hums without turning, swapping in this OEM-spec 58-1837 assembly is the standard professional solution for maintaining peak thermal efficiency and safe manifold operation.
Key Benefits- Combustion Integrity: Maintains precise airflow volume to support optimal fuel-to-air ratios and reduce hazardous emissions.
- Drop-In Compatibility: Engineered for a seamless fit on Hydrotherm furnace models 110-160, eliminating the need for field modifications.
- Enhanced Reliability: The 115V inducer blower utilizes robust internal components to withstand the high-heat environment of the furnace cabinet.
- Rapid Ignition: Rated at 3450 RPM to quickly establish the draft needed to trigger the ignition sequence without delay.
What are the signs that my Hydrotherm inducer assembly is failing?
Contractors typically look for a high-pitched screeching (bearing failure), a heavy vibration during the pre-purge cycle, or a furnace pressure switch that fails to close despite receiving a call for heat.
Does this assembly include the necessary mounting hardware?
This is the complete inducer assembly; however, we recommend inspecting the existing draft inducer gasket or applying high-temp RTV silicone during installation to ensure a gas-tight seal against the collector box.
Can I use this motor to replace a generic draft inducer?
The Hydrotherm 58-1837 is technical-spec specific. Verify your boiler's SKU 58-1837 or model number to ensure the electrical leads and mounting points align with your specific cabinet configuration.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
For veteran HVAC technicians, the Hydrotherm 58-1837 Inducer Assembly is a direct-fit replacement engineered to restore the integrity of the combustion cycle in high-efficiency systems. This heavy-duty draft inducer motor is critical for purging the heat exchanger of residual gases and establishing the negative pressure required to close the furnace pressure switch and initiate ignition. Operating at 115 VAC with a high-torque 3450 RPM output, this 150W assembly ensures consistent static pressure across the venting run, preventing the nuisance HVAC system lockout often caused by aging, seized bearings, or weakened motor windings. Specifically designed for compatibility with Hydrotherm boiler models 110, 120, 130, 140, 150, and 160, this unit features a precision-balanced blower wheel to minimize vibrational resonance and physical strain on the mounting bracket. When diagnosing a noisy inducer assembly or a motor that hums without turning, swapping in this OEM-spec 58-1837 assembly is the standard professional solution for maintaining peak thermal efficiency and safe manifold operation.
Key Benefits- Combustion Integrity: Maintains precise airflow volume to support optimal fuel-to-air ratios and reduce hazardous emissions.
- Drop-In Compatibility: Engineered for a seamless fit on Hydrotherm furnace models 110-160, eliminating the need for field modifications.
- Enhanced Reliability: The 115V inducer blower utilizes robust internal components to withstand the high-heat environment of the furnace cabinet.
- Rapid Ignition: Rated at 3450 RPM to quickly establish the draft needed to trigger the ignition sequence without delay.
What are the signs that my Hydrotherm inducer assembly is failing?
Contractors typically look for a high-pitched screeching (bearing failure), a heavy vibration during the pre-purge cycle, or a furnace pressure switch that fails to close despite receiving a call for heat.
Does this assembly include the necessary mounting hardware?
This is the complete inducer assembly; however, we recommend inspecting the existing draft inducer gasket or applying high-temp RTV silicone during installation to ensure a gas-tight seal against the collector box.
Can I use this motor to replace a generic draft inducer?
The Hydrotherm 58-1837 is technical-spec specific. Verify your boiler's SKU 58-1837 or model number to ensure the electrical leads and mounting points align with your specific cabinet configuration.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
