Hydrolevel 48-3250-67 Replacement Sensor
The Hydrolevel 48-3250-67 is a 3-foot replacement sensor specifically engineered for HydroStat 3000 and 4000 series temperature limit and low water cut-off (LWCO) controllers. As a critical component for hydronic heating systems, this sensor provides precise temperature feedback and water level detection, ensuring the Fuel Smart HydroStat can execute thermal targeting and protect the boiler from dry-fire conditions. The 36-inch lead length offers necessary flexibility for remote mounting applications where the control box is situated away from the immersion well or Electro-Well tapping.
This OEM Hydrolevel sensor is designed for seamless integration with existing HydroStat 3250-Plus and 3150 models. For technicians, maintaining the integrity of the sensing circuit is vital for the Low Water Cut-Off function to operate accurately. When installed into a compatible Hydrolevel Electro-Well, this sensor enables the control to monitor both temperature and water level through a single tapping, streamlining the installation process for oil and gas-fired boilers. Ensure the sensor is fully inserted into the well to maintain high-limit accuracy and prevent nuisance lockouts.
- Direct OEM Compatibility: Engineered specifically for HydroStat controller systems, including the 3100, 3150, 3200-Plus, and 3250-Plus models.
- Dual-Function Sensing: Capable of providing both precise temperature data and low water cut-off signals when used with an Electro-Well.
- Extended Reach: Features a 3-foot (36-inch) sensor cord, ideal for remote mounting or larger boiler jackets where standard lengths are insufficient.
- Accurate Thermal Targeting: Supports the controller's ability to adjust boiler temperature based on demand, optimizing fuel efficiency without sacrificing comfort.
- Rugged Construction: Built to withstand the high-temperature environment of residential and commercial hydronic heating systems.
Common Questions
Is the 48-3250-67 sensor compatible with all HydroStat models?
This sensor is designed for the 3000 and 4000 series HydroStat controllers. Always verify the part number in your specific controller's manual, as different lead lengths (e.g., 12-inch or 48-inch) may be required depending on the installation depth and mounting location.
Can I use this sensor in a standard immersion well?
Yes, it can be used for temperature sensing in a standard well. However, to utilize the Low Water Cut-Off (LWCO) functionality, it must be installed in a Hydrolevel Electro-Well, which allows the sensor to detect the presence of water electronically.
Why is my HydroStat showing a sensor error after replacement?
Ensure the 48-3250-67 sensor is fully seated at the bottom of the well. If it is not fully inserted, the controller may read inaccurate temperatures or trigger a sensor fault. Also, check that the connector is securely snapped into the circuit board inside the HydroStat enclosure.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Hydrolevel 48-3250-67 Replacement Sensor
The Hydrolevel 48-3250-67 is a 3-foot replacement sensor specifically engineered for HydroStat 3000 and 4000 series temperature limit and low water cut-off (LWCO) controllers. As a critical component for hydronic heating systems, this sensor provides precise temperature feedback and water level detection, ensuring the Fuel Smart HydroStat can execute thermal targeting and protect the boiler from dry-fire conditions. The 36-inch lead length offers necessary flexibility for remote mounting applications where the control box is situated away from the immersion well or Electro-Well tapping.
This OEM Hydrolevel sensor is designed for seamless integration with existing HydroStat 3250-Plus and 3150 models. For technicians, maintaining the integrity of the sensing circuit is vital for the Low Water Cut-Off function to operate accurately. When installed into a compatible Hydrolevel Electro-Well, this sensor enables the control to monitor both temperature and water level through a single tapping, streamlining the installation process for oil and gas-fired boilers. Ensure the sensor is fully inserted into the well to maintain high-limit accuracy and prevent nuisance lockouts.
- Direct OEM Compatibility: Engineered specifically for HydroStat controller systems, including the 3100, 3150, 3200-Plus, and 3250-Plus models.
- Dual-Function Sensing: Capable of providing both precise temperature data and low water cut-off signals when used with an Electro-Well.
- Extended Reach: Features a 3-foot (36-inch) sensor cord, ideal for remote mounting or larger boiler jackets where standard lengths are insufficient.
- Accurate Thermal Targeting: Supports the controller's ability to adjust boiler temperature based on demand, optimizing fuel efficiency without sacrificing comfort.
- Rugged Construction: Built to withstand the high-temperature environment of residential and commercial hydronic heating systems.
Common Questions
Is the 48-3250-67 sensor compatible with all HydroStat models?
This sensor is designed for the 3000 and 4000 series HydroStat controllers. Always verify the part number in your specific controller's manual, as different lead lengths (e.g., 12-inch or 48-inch) may be required depending on the installation depth and mounting location.
Can I use this sensor in a standard immersion well?
Yes, it can be used for temperature sensing in a standard well. However, to utilize the Low Water Cut-Off (LWCO) functionality, it must be installed in a Hydrolevel Electro-Well, which allows the sensor to detect the presence of water electronically.
Why is my HydroStat showing a sensor error after replacement?
Ensure the 48-3250-67 sensor is fully seated at the bottom of the well. If it is not fully inserted, the controller may read inaccurate temperatures or trigger a sensor fault. Also, check that the connector is securely snapped into the circuit board inside the HydroStat enclosure.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Hydrolevel 48-3250-67 is a 3-foot replacement sensor specifically engineered for HydroStat 3000 and 4000 series temperature limit and low water cut-off (LWCO) controllers. As a critical component for hydronic heating systems, this sensor provides precise temperature feedback and water level detection, ensuring the Fuel Smart HydroStat can execute thermal targeting and protect the boiler from dry-fire conditions. The 36-inch lead length offers necessary flexibility for remote mounting applications where the control box is situated away from the immersion well or Electro-Well tapping.
This OEM Hydrolevel sensor is designed for seamless integration with existing HydroStat 3250-Plus and 3150 models. For technicians, maintaining the integrity of the sensing circuit is vital for the Low Water Cut-Off function to operate accurately. When installed into a compatible Hydrolevel Electro-Well, this sensor enables the control to monitor both temperature and water level through a single tapping, streamlining the installation process for oil and gas-fired boilers. Ensure the sensor is fully inserted into the well to maintain high-limit accuracy and prevent nuisance lockouts.
- Direct OEM Compatibility: Engineered specifically for HydroStat controller systems, including the 3100, 3150, 3200-Plus, and 3250-Plus models.
- Dual-Function Sensing: Capable of providing both precise temperature data and low water cut-off signals when used with an Electro-Well.
- Extended Reach: Features a 3-foot (36-inch) sensor cord, ideal for remote mounting or larger boiler jackets where standard lengths are insufficient.
- Accurate Thermal Targeting: Supports the controller's ability to adjust boiler temperature based on demand, optimizing fuel efficiency without sacrificing comfort.
- Rugged Construction: Built to withstand the high-temperature environment of residential and commercial hydronic heating systems.
Common Questions
Is the 48-3250-67 sensor compatible with all HydroStat models?
This sensor is designed for the 3000 and 4000 series HydroStat controllers. Always verify the part number in your specific controller's manual, as different lead lengths (e.g., 12-inch or 48-inch) may be required depending on the installation depth and mounting location.
Can I use this sensor in a standard immersion well?
Yes, it can be used for temperature sensing in a standard well. However, to utilize the Low Water Cut-Off (LWCO) functionality, it must be installed in a Hydrolevel Electro-Well, which allows the sensor to detect the presence of water electronically.
Why is my HydroStat showing a sensor error after replacement?
Ensure the 48-3250-67 sensor is fully seated at the bottom of the well. If it is not fully inserted, the controller may read inaccurate temperatures or trigger a sensor fault. Also, check that the connector is securely snapped into the circuit board inside the HydroStat enclosure.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
