Goodway Technologies ESGB-Q-100 Brush
The Goodway ESGB-Q-100 Spin-Grit Tube Brush is a specialized 1" dual-diameter maintenance tool engineered specifically for internally enhanced tubes. As a critical component for chiller and heat exchanger maintenance, this brush utilizes a dual-diameter design to simultaneously clean the lands and grooves of rifled tubing. The large diameter section aggressively scrubs into the grooves, while the smaller diameter ensures the lands are cleared of soft deposits and light scale. Featuring a quick-connect male shank, the ESGB-Q-100 allows for rapid transitions on the job site, fitting seamlessly with GTC-703Q series flexible shafts and other high-torque Goodway tube cleaning systems.
Constructed with abrasive-impregnated nylon filaments, these centrifugal cleaning brushes are aggressive enough to remove tough buildup in ferrous and non-ferrous tubes without damaging the base metal. Each 15-pack provides contractors with a reliable supply for high-volume service calls, ensuring peak HVAC heat transfer efficiency and system vacuum performance. For technicians managing large-scale industrial tube cleaning, the ESGB-Q-100 is the standard for maintaining 1-inch ID enhanced surfaces found in modern high-efficiency chillers.
Key Benefits- Optimized for Enhanced Tubing: Dual-diameter configuration cleans both the rifling lands and grooves in a single pass.
- High-Efficiency Abrasives: Silicon carbide impregnated nylon bristles provide superior scrubbing power over standard nylon.
- Contractor-Ready Connectivity: Integrated quick-connect fitting reduces downtime during chiller tube maintenance.
- Versatile Compatibility: Safe and effective for use in both straight ferrous and non-ferrous internally enhanced tubes.
- Industrial Durability: Rugged construction designed to withstand the high-RPM rotational forces of professional tube cleaners.
Is the ESGB-Q-100 compatible with standard threaded shafts?
No, the "Q" in the part number denotes a quick-connect shank. For threaded applications, the ESGB-100 (non-Q) is required. Ensure your flexible shaft or coupling matches the 7/16" quick-connect interface.
Can this brush be used for heavy, hard-water scaling?
These brushes are designed for soft deposits, mud, algae, and light scale. For tubes completely plugged with calcium or hard minerals, a carbide drill or scale-cutting tool should be used before finishing with the spin-grit brush.
What is the proper sizing for 1-inch ID tubes?
Unlike standard spiral brushes, Goodway Spin-Grit brushes are typically sized to be slightly oversized (equal to or up to 1/16" larger) so the abrasive filaments lay over and maintain constant wall contact during rotation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $13.52
-65%$13.52
$4.73Goodway Technologies ESGB-Q-100 Brush
The Goodway ESGB-Q-100 Spin-Grit Tube Brush is a specialized 1" dual-diameter maintenance tool engineered specifically for internally enhanced tubes. As a critical component for chiller and heat exchanger maintenance, this brush utilizes a dual-diameter design to simultaneously clean the lands and grooves of rifled tubing. The large diameter section aggressively scrubs into the grooves, while the smaller diameter ensures the lands are cleared of soft deposits and light scale. Featuring a quick-connect male shank, the ESGB-Q-100 allows for rapid transitions on the job site, fitting seamlessly with GTC-703Q series flexible shafts and other high-torque Goodway tube cleaning systems.
Constructed with abrasive-impregnated nylon filaments, these centrifugal cleaning brushes are aggressive enough to remove tough buildup in ferrous and non-ferrous tubes without damaging the base metal. Each 15-pack provides contractors with a reliable supply for high-volume service calls, ensuring peak HVAC heat transfer efficiency and system vacuum performance. For technicians managing large-scale industrial tube cleaning, the ESGB-Q-100 is the standard for maintaining 1-inch ID enhanced surfaces found in modern high-efficiency chillers.
Key Benefits- Optimized for Enhanced Tubing: Dual-diameter configuration cleans both the rifling lands and grooves in a single pass.
- High-Efficiency Abrasives: Silicon carbide impregnated nylon bristles provide superior scrubbing power over standard nylon.
- Contractor-Ready Connectivity: Integrated quick-connect fitting reduces downtime during chiller tube maintenance.
- Versatile Compatibility: Safe and effective for use in both straight ferrous and non-ferrous internally enhanced tubes.
- Industrial Durability: Rugged construction designed to withstand the high-RPM rotational forces of professional tube cleaners.
Is the ESGB-Q-100 compatible with standard threaded shafts?
No, the "Q" in the part number denotes a quick-connect shank. For threaded applications, the ESGB-100 (non-Q) is required. Ensure your flexible shaft or coupling matches the 7/16" quick-connect interface.
Can this brush be used for heavy, hard-water scaling?
These brushes are designed for soft deposits, mud, algae, and light scale. For tubes completely plugged with calcium or hard minerals, a carbide drill or scale-cutting tool should be used before finishing with the spin-grit brush.
What is the proper sizing for 1-inch ID tubes?
Unlike standard spiral brushes, Goodway Spin-Grit brushes are typically sized to be slightly oversized (equal to or up to 1/16" larger) so the abrasive filaments lay over and maintain constant wall contact during rotation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Goodway ESGB-Q-100 Spin-Grit Tube Brush is a specialized 1" dual-diameter maintenance tool engineered specifically for internally enhanced tubes. As a critical component for chiller and heat exchanger maintenance, this brush utilizes a dual-diameter design to simultaneously clean the lands and grooves of rifled tubing. The large diameter section aggressively scrubs into the grooves, while the smaller diameter ensures the lands are cleared of soft deposits and light scale. Featuring a quick-connect male shank, the ESGB-Q-100 allows for rapid transitions on the job site, fitting seamlessly with GTC-703Q series flexible shafts and other high-torque Goodway tube cleaning systems.
Constructed with abrasive-impregnated nylon filaments, these centrifugal cleaning brushes are aggressive enough to remove tough buildup in ferrous and non-ferrous tubes without damaging the base metal. Each 15-pack provides contractors with a reliable supply for high-volume service calls, ensuring peak HVAC heat transfer efficiency and system vacuum performance. For technicians managing large-scale industrial tube cleaning, the ESGB-Q-100 is the standard for maintaining 1-inch ID enhanced surfaces found in modern high-efficiency chillers.
Key Benefits- Optimized for Enhanced Tubing: Dual-diameter configuration cleans both the rifling lands and grooves in a single pass.
- High-Efficiency Abrasives: Silicon carbide impregnated nylon bristles provide superior scrubbing power over standard nylon.
- Contractor-Ready Connectivity: Integrated quick-connect fitting reduces downtime during chiller tube maintenance.
- Versatile Compatibility: Safe and effective for use in both straight ferrous and non-ferrous internally enhanced tubes.
- Industrial Durability: Rugged construction designed to withstand the high-RPM rotational forces of professional tube cleaners.
Is the ESGB-Q-100 compatible with standard threaded shafts?
No, the "Q" in the part number denotes a quick-connect shank. For threaded applications, the ESGB-100 (non-Q) is required. Ensure your flexible shaft or coupling matches the 7/16" quick-connect interface.
Can this brush be used for heavy, hard-water scaling?
These brushes are designed for soft deposits, mud, algae, and light scale. For tubes completely plugged with calcium or hard minerals, a carbide drill or scale-cutting tool should be used before finishing with the spin-grit brush.
What is the proper sizing for 1-inch ID tubes?
Unlike standard spiral brushes, Goodway Spin-Grit brushes are typically sized to be slightly oversized (equal to or up to 1/16" larger) so the abrasive filaments lay over and maintain constant wall contact during rotation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
