GC Valves S211SH02T2GJ5 Solenoid Valve
The GC Valves S211SH02T2GJ5 is a high-performance 2-way normally closed solenoid valve designed for demanding commercial and industrial fluid control applications. Featuring a rugged brass body and a substantial 1 1/4" NPT connection, this piloted diaphragm valve is engineered to handle high flow rates with its large 1 1/2" orifice. This model is exceptionally well-suited for high-temperature service, including steam systems, thanks to the combination of Teflon (PTFE) and EPR seal materials and a Class H coil rated for temperatures up to 356°F (180°C).
Operating on a standard 120Vac power supply, the S211SH02T2GJ5 provides reliable shut-off for aggressive media, air, neutral gases, and water. Contractors typically specify this S21 Series valve for its multi-poised mounting capabilities and NEMA 4X rated conduit housing, which ensures protection in wash-down or corrosive environments. When integrating this unit into a piping system, ensure the flow follows the direction indicated on the valve body to maintain the integrity of the piloted diaphragm operation and prevent backflow issues.
Key Benefits:- Steam Rated Performance: Equipped with a Class H high-temperature coil and Teflon seals, making it ideal for 150 PSI steam applications.
- High Flow Capacity: The 1 1/2" orifice size ensures minimal pressure drop across the 1 1/4" pipe line.
- Durable Construction: Heavy-duty brass valve body provides superior corrosion resistance for water and light oil service.
- Versatile Installation: The multi-poised design allows for mounting in various orientations, though vertical/upright is recommended for optimal plunger longevity.
- Industrial Protection: Features an encapsulated 1/2" conduit connection with NEMA 4/4X environmental ratings.
What media is compatible with the Teflon/EPR seal?
The Teflon/EPR seal combination is highly resistant to steam, hot water, and certain aggressive chemicals. However, it is not recommended for petroleum-based oils or concentrated acids. Always verify chemical compatibility with the specific media in your system.
Can this valve be used in a gravity-fed system?
As a piloted diaphragm valve, this unit typically requires a minimum operating pressure differential (usually 5 PSI) to lift the diaphragm. It is not recommended for zero-pressure or purely gravity-fed applications where a direct-acting valve would be more appropriate.
What should I check if the valve fails to open?
First, verify that the 120V AC coil is receiving the correct voltage. If the electrical circuit is sound, inspect the pilot orifice for debris or scale buildup, which is common in steam and hard water lines and can prevent the pressure differential from equalizing.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
GC Valves S211SH02T2GJ5 Solenoid Valve
The GC Valves S211SH02T2GJ5 is a high-performance 2-way normally closed solenoid valve designed for demanding commercial and industrial fluid control applications. Featuring a rugged brass body and a substantial 1 1/4" NPT connection, this piloted diaphragm valve is engineered to handle high flow rates with its large 1 1/2" orifice. This model is exceptionally well-suited for high-temperature service, including steam systems, thanks to the combination of Teflon (PTFE) and EPR seal materials and a Class H coil rated for temperatures up to 356°F (180°C).
Operating on a standard 120Vac power supply, the S211SH02T2GJ5 provides reliable shut-off for aggressive media, air, neutral gases, and water. Contractors typically specify this S21 Series valve for its multi-poised mounting capabilities and NEMA 4X rated conduit housing, which ensures protection in wash-down or corrosive environments. When integrating this unit into a piping system, ensure the flow follows the direction indicated on the valve body to maintain the integrity of the piloted diaphragm operation and prevent backflow issues.
Key Benefits:- Steam Rated Performance: Equipped with a Class H high-temperature coil and Teflon seals, making it ideal for 150 PSI steam applications.
- High Flow Capacity: The 1 1/2" orifice size ensures minimal pressure drop across the 1 1/4" pipe line.
- Durable Construction: Heavy-duty brass valve body provides superior corrosion resistance for water and light oil service.
- Versatile Installation: The multi-poised design allows for mounting in various orientations, though vertical/upright is recommended for optimal plunger longevity.
- Industrial Protection: Features an encapsulated 1/2" conduit connection with NEMA 4/4X environmental ratings.
What media is compatible with the Teflon/EPR seal?
The Teflon/EPR seal combination is highly resistant to steam, hot water, and certain aggressive chemicals. However, it is not recommended for petroleum-based oils or concentrated acids. Always verify chemical compatibility with the specific media in your system.
Can this valve be used in a gravity-fed system?
As a piloted diaphragm valve, this unit typically requires a minimum operating pressure differential (usually 5 PSI) to lift the diaphragm. It is not recommended for zero-pressure or purely gravity-fed applications where a direct-acting valve would be more appropriate.
What should I check if the valve fails to open?
First, verify that the 120V AC coil is receiving the correct voltage. If the electrical circuit is sound, inspect the pilot orifice for debris or scale buildup, which is common in steam and hard water lines and can prevent the pressure differential from equalizing.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The GC Valves S211SH02T2GJ5 is a high-performance 2-way normally closed solenoid valve designed for demanding commercial and industrial fluid control applications. Featuring a rugged brass body and a substantial 1 1/4" NPT connection, this piloted diaphragm valve is engineered to handle high flow rates with its large 1 1/2" orifice. This model is exceptionally well-suited for high-temperature service, including steam systems, thanks to the combination of Teflon (PTFE) and EPR seal materials and a Class H coil rated for temperatures up to 356°F (180°C).
Operating on a standard 120Vac power supply, the S211SH02T2GJ5 provides reliable shut-off for aggressive media, air, neutral gases, and water. Contractors typically specify this S21 Series valve for its multi-poised mounting capabilities and NEMA 4X rated conduit housing, which ensures protection in wash-down or corrosive environments. When integrating this unit into a piping system, ensure the flow follows the direction indicated on the valve body to maintain the integrity of the piloted diaphragm operation and prevent backflow issues.
Key Benefits:- Steam Rated Performance: Equipped with a Class H high-temperature coil and Teflon seals, making it ideal for 150 PSI steam applications.
- High Flow Capacity: The 1 1/2" orifice size ensures minimal pressure drop across the 1 1/4" pipe line.
- Durable Construction: Heavy-duty brass valve body provides superior corrosion resistance for water and light oil service.
- Versatile Installation: The multi-poised design allows for mounting in various orientations, though vertical/upright is recommended for optimal plunger longevity.
- Industrial Protection: Features an encapsulated 1/2" conduit connection with NEMA 4/4X environmental ratings.
What media is compatible with the Teflon/EPR seal?
The Teflon/EPR seal combination is highly resistant to steam, hot water, and certain aggressive chemicals. However, it is not recommended for petroleum-based oils or concentrated acids. Always verify chemical compatibility with the specific media in your system.
Can this valve be used in a gravity-fed system?
As a piloted diaphragm valve, this unit typically requires a minimum operating pressure differential (usually 5 PSI) to lift the diaphragm. It is not recommended for zero-pressure or purely gravity-fed applications where a direct-acting valve would be more appropriate.
What should I check if the valve fails to open?
First, verify that the 120V AC coil is receiving the correct voltage. If the electrical circuit is sound, inspect the pilot orifice for debris or scale buildup, which is common in steam and hard water lines and can prevent the pressure differential from equalizing.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
