Field Controls 602609900 Circuit Board Kit
The Field Controls 602609900 Circuit Board Kit, also known as the CK-63 Control Kit, is a specialized 120 VAC interface engineered specifically for oil-fired heating appliances coupled with SWG Series Power Venters or Field Draft Inducers. This technician-grade replacement board (part number 46399200) serves as the primary solid-state logic for managing the post purge cycle, effectively exhausting residual flue gases once the thermostat is satisfied. It is a direct upgrade or replacement for legacy CK-61 and CK-62 models, maintaining consistent terminal designations (L1, N, M1, T1, T2, T3) for a streamlined retrofitting process. The integrated pressure switch assembly is vital for verifying negative pressure in the vent pipe before the burner is permitted to fire, ensuring safe combustion cycles. This kit manages burner motors up to 1/3 HP and supports simultaneous burner/venter operation through a delayed oil solenoid valve configuration.
- Optimized Post Purge Control: Features an adjustable solid-state timer to refine venting cycles and clear soot or ash effectively.
- Broad Compatibility: Engineered for 120 VAC oil systems; also facilitates 24V wiring by connecting the yellow mode wire to the dedicated 24V terminal.
- Enhanced Safety Logic: Seamlessly integrates with the WMO-1 blocked vent switch to detect flue obstructions and prevent unsafe operating conditions.
- Reliable Pressure Sensing: Includes 1/4 inch aluminum tubing and connectors to monitor the venter motor pressure output with precision.
- Durable Infrastructure: Housed in a rugged junction box designed for floor joist or wall mounting, protecting the Field Controls CK-63 circuit from environmental wear.
Common Questions:
How do I adjust the post purge time on the CK-63 board?
Rotate the timer adjustment on the solid-state control clockwise to increase the duration or counterclockwise to decrease it, ensuring all residual gases are cleared after the burner cycles off.
Can this board replace an older CK-61 or CK-62 unit?
Yes, the 602609900 is the designated replacement for these models. All external wiring remains the same, allowing you to move leads directly to the corresponding terminals on the new board.
What does the LED indicator on the board signify?
The LED illuminates when the pressure switch closes during a call for heat, indicating the burner is receiving power to fire. It should remain off during the post purge phase once the thermostat is satisfied.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Field Controls 602609900 Circuit Board Kit
The Field Controls 602609900 Circuit Board Kit, also known as the CK-63 Control Kit, is a specialized 120 VAC interface engineered specifically for oil-fired heating appliances coupled with SWG Series Power Venters or Field Draft Inducers. This technician-grade replacement board (part number 46399200) serves as the primary solid-state logic for managing the post purge cycle, effectively exhausting residual flue gases once the thermostat is satisfied. It is a direct upgrade or replacement for legacy CK-61 and CK-62 models, maintaining consistent terminal designations (L1, N, M1, T1, T2, T3) for a streamlined retrofitting process. The integrated pressure switch assembly is vital for verifying negative pressure in the vent pipe before the burner is permitted to fire, ensuring safe combustion cycles. This kit manages burner motors up to 1/3 HP and supports simultaneous burner/venter operation through a delayed oil solenoid valve configuration.
- Optimized Post Purge Control: Features an adjustable solid-state timer to refine venting cycles and clear soot or ash effectively.
- Broad Compatibility: Engineered for 120 VAC oil systems; also facilitates 24V wiring by connecting the yellow mode wire to the dedicated 24V terminal.
- Enhanced Safety Logic: Seamlessly integrates with the WMO-1 blocked vent switch to detect flue obstructions and prevent unsafe operating conditions.
- Reliable Pressure Sensing: Includes 1/4 inch aluminum tubing and connectors to monitor the venter motor pressure output with precision.
- Durable Infrastructure: Housed in a rugged junction box designed for floor joist or wall mounting, protecting the Field Controls CK-63 circuit from environmental wear.
Common Questions:
How do I adjust the post purge time on the CK-63 board?
Rotate the timer adjustment on the solid-state control clockwise to increase the duration or counterclockwise to decrease it, ensuring all residual gases are cleared after the burner cycles off.
Can this board replace an older CK-61 or CK-62 unit?
Yes, the 602609900 is the designated replacement for these models. All external wiring remains the same, allowing you to move leads directly to the corresponding terminals on the new board.
What does the LED indicator on the board signify?
The LED illuminates when the pressure switch closes during a call for heat, indicating the burner is receiving power to fire. It should remain off during the post purge phase once the thermostat is satisfied.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Field Controls 602609900 Circuit Board Kit, also known as the CK-63 Control Kit, is a specialized 120 VAC interface engineered specifically for oil-fired heating appliances coupled with SWG Series Power Venters or Field Draft Inducers. This technician-grade replacement board (part number 46399200) serves as the primary solid-state logic for managing the post purge cycle, effectively exhausting residual flue gases once the thermostat is satisfied. It is a direct upgrade or replacement for legacy CK-61 and CK-62 models, maintaining consistent terminal designations (L1, N, M1, T1, T2, T3) for a streamlined retrofitting process. The integrated pressure switch assembly is vital for verifying negative pressure in the vent pipe before the burner is permitted to fire, ensuring safe combustion cycles. This kit manages burner motors up to 1/3 HP and supports simultaneous burner/venter operation through a delayed oil solenoid valve configuration.
- Optimized Post Purge Control: Features an adjustable solid-state timer to refine venting cycles and clear soot or ash effectively.
- Broad Compatibility: Engineered for 120 VAC oil systems; also facilitates 24V wiring by connecting the yellow mode wire to the dedicated 24V terminal.
- Enhanced Safety Logic: Seamlessly integrates with the WMO-1 blocked vent switch to detect flue obstructions and prevent unsafe operating conditions.
- Reliable Pressure Sensing: Includes 1/4 inch aluminum tubing and connectors to monitor the venter motor pressure output with precision.
- Durable Infrastructure: Housed in a rugged junction box designed for floor joist or wall mounting, protecting the Field Controls CK-63 circuit from environmental wear.
Common Questions:
How do I adjust the post purge time on the CK-63 board?
Rotate the timer adjustment on the solid-state control clockwise to increase the duration or counterclockwise to decrease it, ensuring all residual gases are cleared after the burner cycles off.
Can this board replace an older CK-61 or CK-62 unit?
Yes, the 602609900 is the designated replacement for these models. All external wiring remains the same, allowing you to move leads directly to the corresponding terminals on the new board.
What does the LED indicator on the board signify?
The LED illuminates when the pressure switch closes during a call for heat, indicating the burner is receiving power to fire. It should remain off during the post purge phase once the thermostat is satisfied.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
