Fasco D405 Motor
The Fasco D405 Motor is a high-performance 1/10 HP OEM replacement motor designed for demanding HVACR applications, specifically within ITT Reznor duct furnaces and rooftop ventilators. Operating at 115V and a nominal 3200 RPM, this 3.3-inch diameter motor features a Permanent Split Capacitor (PSC) design to ensure high electrical efficiency and reliable starting torque. Built with a ball bearing system, the D405 is engineered for continuous duty in open air-over (OAO) environments, allowing for superior heat dissipation during high-speed operation. This reversible rotation motor includes a 5/16" x 3-1/4" shaft with a flat and is thermally protected to prevent winding failure during over-current conditions. It serves as a direct cross-reference for Dayton 38N559 and various Reznor part numbers, including 7162-0224 and CCW77162-0311. For a complete installation, the required 4 MFD 370VAC capacitor is included, facilitating its use across all-angle mounting configurations with its extended stud patterns.
Key Benefits- Universal HVAC Compatibility: Predominantly used in ITT Reznor units and compatible with a wide range of general-purpose 3.3" frame blower applications.
- Enhanced Durability: Equipped with dual ball bearings for reduced friction, extending the operational lifespan compared to standard sleeve bearing alternatives.
- Reversible Rotation: Features CW/CCW rotation flexibility, allowing technicians to match original equipment airflow requirements in the field.
- Integrated Protection: Auto-reset thermal overload protection safeguards internal components against overheating and electrical surging.
- Total Installation Kit: Ships with the necessary 36-inch leads and a 4 MFD run capacitor to minimize downtime during emergency service calls.
Is the D405 a direct replacement for shaded pole motors?
While it can replace some shaded pole motors of the same frame size, the D405 is a PSC motor, which offers higher efficiency. Ensure the included capacitor is properly installed to avoid motor failure.
Can this motor be mounted in any orientation?
Yes, the Fasco D405 features all-angle ball bearings and extended studs on both ends, making it suitable for shaft-up, shaft-down, or horizontal mounting positions.
What are the primary cross-references for this model?
This unit commonly replaces ITT Reznor numbers 7162-0224, CW7162-0224, and CCW175-43846, as well as the Century 991 and Dayton 38N559.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $389.21
-65%$389.21
$136.22Fasco D405 Motor
The Fasco D405 Motor is a high-performance 1/10 HP OEM replacement motor designed for demanding HVACR applications, specifically within ITT Reznor duct furnaces and rooftop ventilators. Operating at 115V and a nominal 3200 RPM, this 3.3-inch diameter motor features a Permanent Split Capacitor (PSC) design to ensure high electrical efficiency and reliable starting torque. Built with a ball bearing system, the D405 is engineered for continuous duty in open air-over (OAO) environments, allowing for superior heat dissipation during high-speed operation. This reversible rotation motor includes a 5/16" x 3-1/4" shaft with a flat and is thermally protected to prevent winding failure during over-current conditions. It serves as a direct cross-reference for Dayton 38N559 and various Reznor part numbers, including 7162-0224 and CCW77162-0311. For a complete installation, the required 4 MFD 370VAC capacitor is included, facilitating its use across all-angle mounting configurations with its extended stud patterns.
Key Benefits- Universal HVAC Compatibility: Predominantly used in ITT Reznor units and compatible with a wide range of general-purpose 3.3" frame blower applications.
- Enhanced Durability: Equipped with dual ball bearings for reduced friction, extending the operational lifespan compared to standard sleeve bearing alternatives.
- Reversible Rotation: Features CW/CCW rotation flexibility, allowing technicians to match original equipment airflow requirements in the field.
- Integrated Protection: Auto-reset thermal overload protection safeguards internal components against overheating and electrical surging.
- Total Installation Kit: Ships with the necessary 36-inch leads and a 4 MFD run capacitor to minimize downtime during emergency service calls.
Is the D405 a direct replacement for shaded pole motors?
While it can replace some shaded pole motors of the same frame size, the D405 is a PSC motor, which offers higher efficiency. Ensure the included capacitor is properly installed to avoid motor failure.
Can this motor be mounted in any orientation?
Yes, the Fasco D405 features all-angle ball bearings and extended studs on both ends, making it suitable for shaft-up, shaft-down, or horizontal mounting positions.
What are the primary cross-references for this model?
This unit commonly replaces ITT Reznor numbers 7162-0224, CW7162-0224, and CCW175-43846, as well as the Century 991 and Dayton 38N559.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Fasco D405 Motor is a high-performance 1/10 HP OEM replacement motor designed for demanding HVACR applications, specifically within ITT Reznor duct furnaces and rooftop ventilators. Operating at 115V and a nominal 3200 RPM, this 3.3-inch diameter motor features a Permanent Split Capacitor (PSC) design to ensure high electrical efficiency and reliable starting torque. Built with a ball bearing system, the D405 is engineered for continuous duty in open air-over (OAO) environments, allowing for superior heat dissipation during high-speed operation. This reversible rotation motor includes a 5/16" x 3-1/4" shaft with a flat and is thermally protected to prevent winding failure during over-current conditions. It serves as a direct cross-reference for Dayton 38N559 and various Reznor part numbers, including 7162-0224 and CCW77162-0311. For a complete installation, the required 4 MFD 370VAC capacitor is included, facilitating its use across all-angle mounting configurations with its extended stud patterns.
Key Benefits- Universal HVAC Compatibility: Predominantly used in ITT Reznor units and compatible with a wide range of general-purpose 3.3" frame blower applications.
- Enhanced Durability: Equipped with dual ball bearings for reduced friction, extending the operational lifespan compared to standard sleeve bearing alternatives.
- Reversible Rotation: Features CW/CCW rotation flexibility, allowing technicians to match original equipment airflow requirements in the field.
- Integrated Protection: Auto-reset thermal overload protection safeguards internal components against overheating and electrical surging.
- Total Installation Kit: Ships with the necessary 36-inch leads and a 4 MFD run capacitor to minimize downtime during emergency service calls.
Is the D405 a direct replacement for shaded pole motors?
While it can replace some shaded pole motors of the same frame size, the D405 is a PSC motor, which offers higher efficiency. Ensure the included capacitor is properly installed to avoid motor failure.
Can this motor be mounted in any orientation?
Yes, the Fasco D405 features all-angle ball bearings and extended studs on both ends, making it suitable for shaft-up, shaft-down, or horizontal mounting positions.
What are the primary cross-references for this model?
This unit commonly replaces ITT Reznor numbers 7162-0224, CW7162-0224, and CCW175-43846, as well as the Century 991 and Dayton 38N559.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
