Fasco A213 Motor
The Fasco A213 Motor is a high-performance shaded pole draft inducer motor specifically engineered for residential and light commercial HVAC applications. Operating at 115V with a fixed speed of 3200 RPM, this 3.3-inch diameter motor provides critical venting for high-efficiency furnaces. It is a direct OEM replacement for Reznor 100817, 110547, and 124558 units, ensuring a drop-in fit for specific gas-fired unit heaters. Featuring a thermally protected design and 2-speed capability, it manages static pressure requirements effectively to prevent pressure switch trip-outs. The rugged centrifugal blower assembly construction ensures consistent airflow across the heat exchanger. For contractors, the Fasco A213 offers reliable combustion air blower performance, maintaining the correct fuel-to-air ratio for safe furnace operation. Integrating this specific draft inducer restores system efficiency and resolves common ignition sequence failures caused by aging or seized inducer assemblies.
Key Technical Benefits- Direct OEM Compatibility: Engineered as a drop-in replacement for Reznor and various draft inducer motor 115V 3200 RPM applications.
- High-Speed Performance: Delivers consistent 3200 RPM to maintain necessary flue gas velocity and prevent condensate buildup.
- Thermal Protection: Built-in internal overload protection prevents winding burnout during motor-lock conditions.
- Durable Construction: Shaded pole design with high-quality bearings for extended service life in high-temperature environments.
- Simplified Installation: Standard 3.3-inch frame size with leads for quick integration into the existing wiring harness.
Why is my furnace drafting motor making a loud grinding noise?
A grinding or screeching noise usually indicates bearing failure within the Fasco A213 assembly. Because these are sealed units, replacing the entire motor is the industry-standard fix to restore quiet and safe operation.
Will this motor fix a "pressure switch stuck open" error code?
If the inducer motor fails to reach the calibrated 3200 RPM, it cannot create enough vacuum to close the pressure switch. Replacing a weak motor often resolves this common sequence-of-operation fault.
Can I use the Fasco A213 as a replacement for Reznor 100817?
Yes, this unit is the designated aftermarket replacement for Reznor 100817, featuring the correct electrical specs and mounting footprint for those unit heaters.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $274.27
-65%$274.27
$95.99Fasco A213 Motor
The Fasco A213 Motor is a high-performance shaded pole draft inducer motor specifically engineered for residential and light commercial HVAC applications. Operating at 115V with a fixed speed of 3200 RPM, this 3.3-inch diameter motor provides critical venting for high-efficiency furnaces. It is a direct OEM replacement for Reznor 100817, 110547, and 124558 units, ensuring a drop-in fit for specific gas-fired unit heaters. Featuring a thermally protected design and 2-speed capability, it manages static pressure requirements effectively to prevent pressure switch trip-outs. The rugged centrifugal blower assembly construction ensures consistent airflow across the heat exchanger. For contractors, the Fasco A213 offers reliable combustion air blower performance, maintaining the correct fuel-to-air ratio for safe furnace operation. Integrating this specific draft inducer restores system efficiency and resolves common ignition sequence failures caused by aging or seized inducer assemblies.
Key Technical Benefits- Direct OEM Compatibility: Engineered as a drop-in replacement for Reznor and various draft inducer motor 115V 3200 RPM applications.
- High-Speed Performance: Delivers consistent 3200 RPM to maintain necessary flue gas velocity and prevent condensate buildup.
- Thermal Protection: Built-in internal overload protection prevents winding burnout during motor-lock conditions.
- Durable Construction: Shaded pole design with high-quality bearings for extended service life in high-temperature environments.
- Simplified Installation: Standard 3.3-inch frame size with leads for quick integration into the existing wiring harness.
Why is my furnace drafting motor making a loud grinding noise?
A grinding or screeching noise usually indicates bearing failure within the Fasco A213 assembly. Because these are sealed units, replacing the entire motor is the industry-standard fix to restore quiet and safe operation.
Will this motor fix a "pressure switch stuck open" error code?
If the inducer motor fails to reach the calibrated 3200 RPM, it cannot create enough vacuum to close the pressure switch. Replacing a weak motor often resolves this common sequence-of-operation fault.
Can I use the Fasco A213 as a replacement for Reznor 100817?
Yes, this unit is the designated aftermarket replacement for Reznor 100817, featuring the correct electrical specs and mounting footprint for those unit heaters.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Fasco A213 Motor is a high-performance shaded pole draft inducer motor specifically engineered for residential and light commercial HVAC applications. Operating at 115V with a fixed speed of 3200 RPM, this 3.3-inch diameter motor provides critical venting for high-efficiency furnaces. It is a direct OEM replacement for Reznor 100817, 110547, and 124558 units, ensuring a drop-in fit for specific gas-fired unit heaters. Featuring a thermally protected design and 2-speed capability, it manages static pressure requirements effectively to prevent pressure switch trip-outs. The rugged centrifugal blower assembly construction ensures consistent airflow across the heat exchanger. For contractors, the Fasco A213 offers reliable combustion air blower performance, maintaining the correct fuel-to-air ratio for safe furnace operation. Integrating this specific draft inducer restores system efficiency and resolves common ignition sequence failures caused by aging or seized inducer assemblies.
Key Technical Benefits- Direct OEM Compatibility: Engineered as a drop-in replacement for Reznor and various draft inducer motor 115V 3200 RPM applications.
- High-Speed Performance: Delivers consistent 3200 RPM to maintain necessary flue gas velocity and prevent condensate buildup.
- Thermal Protection: Built-in internal overload protection prevents winding burnout during motor-lock conditions.
- Durable Construction: Shaded pole design with high-quality bearings for extended service life in high-temperature environments.
- Simplified Installation: Standard 3.3-inch frame size with leads for quick integration into the existing wiring harness.
Why is my furnace drafting motor making a loud grinding noise?
A grinding or screeching noise usually indicates bearing failure within the Fasco A213 assembly. Because these are sealed units, replacing the entire motor is the industry-standard fix to restore quiet and safe operation.
Will this motor fix a "pressure switch stuck open" error code?
If the inducer motor fails to reach the calibrated 3200 RPM, it cannot create enough vacuum to close the pressure switch. Replacing a weak motor often resolves this common sequence-of-operation fault.
Can I use the Fasco A213 as a replacement for Reznor 100817?
Yes, this unit is the designated aftermarket replacement for Reznor 100817, featuring the correct electrical specs and mounting footprint for those unit heaters.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
