Fasco A134 Inducer Motor
The Fasco A134 Inducer Motor is a high-performance shaded pole OEM replacement draft inducer engineered specifically for Intercity Products (ICP), Heil, and Tempstar heating systems. Operating at 115V with a 1/25 HP rating, this 1-speed furnace blower delivers a consistent 3060 RPM to ensure proper flue gas evacuation and pressure switch engagement. Built with a 3.3-inch diameter motor and clockwise (CW) rotation, the unit features Class B insulation and is thermally protected to withstand the demanding ambient temperatures found in high-efficiency furnace cabinets. As a veteran-grade exhaust vent motor, it serves as a direct drop-in for several legacy part numbers, including 7021-9335, 7021-8735, 7021-9499, and 7021-8736. The ball-bearing design (or high-grade sleeve depending on vintage) ensures optimal airflow and reduces the mechanical vibration that leads to premature failure in residential draft inducer assemblies. Always verify the 1.5-amp draw and housing style—this model features a round outlet without a flange—to ensure a seamless installation on the heat exchanger interface.
Key Benefits:
- Direct OEM Compatibility: Engineered as a precision ICP furnace motor replacement to restore system timing and safety sequences.
- Industrial-Grade Construction: Features a robust 3.3-inch motor diameter for high-torque draft inducer performance and long-term reliability.
- Advanced Safety: Thermally protected windings prevent overheating during extended run cycles and protect the control board from electrical feedback.
- Installation Efficiency: Comes with 23-inch leads and pin terminals for immediate connection to the factory wiring harness.
- Quiet Operation: Precision-balanced components minimize the humming and rattling common in worn-out furnace draft inducers.
Common Questions:
How do I know if my Fasco A134 needs replacement?
Technicians typically look for a "closed" pressure switch error code on the control board or listen for screeching bearings. If the motor is getting 115V but fails to spin at 3060 RPM, the shaded pole windings or bearings have likely seized.
Are gaskets included with this inducer motor?
This specific SKU is the motor and blower assembly only. It is professional practice to apply a high-temperature RTV silicone or a new fiberglass gasket to ensure a gas-tight seal against the collector box.
Can I use this as a substitute for a variable speed inducer?
No. The A134 is a dedicated 1-speed, 115V unit. Substituting a single-speed motor into a variable-speed system will cause communication errors with the furnace control board and compromise safety.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Fasco A134 Inducer Motor
The Fasco A134 Inducer Motor is a high-performance shaded pole OEM replacement draft inducer engineered specifically for Intercity Products (ICP), Heil, and Tempstar heating systems. Operating at 115V with a 1/25 HP rating, this 1-speed furnace blower delivers a consistent 3060 RPM to ensure proper flue gas evacuation and pressure switch engagement. Built with a 3.3-inch diameter motor and clockwise (CW) rotation, the unit features Class B insulation and is thermally protected to withstand the demanding ambient temperatures found in high-efficiency furnace cabinets. As a veteran-grade exhaust vent motor, it serves as a direct drop-in for several legacy part numbers, including 7021-9335, 7021-8735, 7021-9499, and 7021-8736. The ball-bearing design (or high-grade sleeve depending on vintage) ensures optimal airflow and reduces the mechanical vibration that leads to premature failure in residential draft inducer assemblies. Always verify the 1.5-amp draw and housing style—this model features a round outlet without a flange—to ensure a seamless installation on the heat exchanger interface.
Key Benefits:
- Direct OEM Compatibility: Engineered as a precision ICP furnace motor replacement to restore system timing and safety sequences.
- Industrial-Grade Construction: Features a robust 3.3-inch motor diameter for high-torque draft inducer performance and long-term reliability.
- Advanced Safety: Thermally protected windings prevent overheating during extended run cycles and protect the control board from electrical feedback.
- Installation Efficiency: Comes with 23-inch leads and pin terminals for immediate connection to the factory wiring harness.
- Quiet Operation: Precision-balanced components minimize the humming and rattling common in worn-out furnace draft inducers.
Common Questions:
How do I know if my Fasco A134 needs replacement?
Technicians typically look for a "closed" pressure switch error code on the control board or listen for screeching bearings. If the motor is getting 115V but fails to spin at 3060 RPM, the shaded pole windings or bearings have likely seized.
Are gaskets included with this inducer motor?
This specific SKU is the motor and blower assembly only. It is professional practice to apply a high-temperature RTV silicone or a new fiberglass gasket to ensure a gas-tight seal against the collector box.
Can I use this as a substitute for a variable speed inducer?
No. The A134 is a dedicated 1-speed, 115V unit. Substituting a single-speed motor into a variable-speed system will cause communication errors with the furnace control board and compromise safety.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Fasco A134 Inducer Motor is a high-performance shaded pole OEM replacement draft inducer engineered specifically for Intercity Products (ICP), Heil, and Tempstar heating systems. Operating at 115V with a 1/25 HP rating, this 1-speed furnace blower delivers a consistent 3060 RPM to ensure proper flue gas evacuation and pressure switch engagement. Built with a 3.3-inch diameter motor and clockwise (CW) rotation, the unit features Class B insulation and is thermally protected to withstand the demanding ambient temperatures found in high-efficiency furnace cabinets. As a veteran-grade exhaust vent motor, it serves as a direct drop-in for several legacy part numbers, including 7021-9335, 7021-8735, 7021-9499, and 7021-8736. The ball-bearing design (or high-grade sleeve depending on vintage) ensures optimal airflow and reduces the mechanical vibration that leads to premature failure in residential draft inducer assemblies. Always verify the 1.5-amp draw and housing style—this model features a round outlet without a flange—to ensure a seamless installation on the heat exchanger interface.
Key Benefits:
- Direct OEM Compatibility: Engineered as a precision ICP furnace motor replacement to restore system timing and safety sequences.
- Industrial-Grade Construction: Features a robust 3.3-inch motor diameter for high-torque draft inducer performance and long-term reliability.
- Advanced Safety: Thermally protected windings prevent overheating during extended run cycles and protect the control board from electrical feedback.
- Installation Efficiency: Comes with 23-inch leads and pin terminals for immediate connection to the factory wiring harness.
- Quiet Operation: Precision-balanced components minimize the humming and rattling common in worn-out furnace draft inducers.
Common Questions:
How do I know if my Fasco A134 needs replacement?
Technicians typically look for a "closed" pressure switch error code on the control board or listen for screeching bearings. If the motor is getting 115V but fails to spin at 3060 RPM, the shaded pole windings or bearings have likely seized.
Are gaskets included with this inducer motor?
This specific SKU is the motor and blower assembly only. It is professional practice to apply a high-temperature RTV silicone or a new fiberglass gasket to ensure a gas-tight seal against the collector box.
Can I use this as a substitute for a variable speed inducer?
No. The A134 is a dedicated 1-speed, 115V unit. Substituting a single-speed motor into a variable-speed system will cause communication errors with the furnace control board and compromise safety.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
