Fasco A122 Inducer Motor
The Fasco A122 Inducer Motor is a precision-engineered OEM replacement draft inducer designed specifically for Nordyne heating systems. Operating at 115V with a 3450 RPM single-speed rating, this unit is the direct replacement for Nordyne 903962, as well as 6219490 and 7021-11227. Built with a shaded pole motor and ball bearing construction, it ensures low-friction operation and enhanced thermal protection for long-cycle reliability in high-heat environments. As a veteran-grade furnace exhaust blower, the A122 features a 3.3-inch diameter motor and a round outlet optimized for standard flue connections. This centrifugal inducer is critical for maintaining proper static pressure and scavenging combustion gases before the ignition cycle. Its CWSE (Clockwise Shaft End) rotation and integrated 2-prong Molex plug facilitate a drop-in installation for contractors. When you need a 115V draft inducer motor that meets original equipment specifications for airflow and amperage draw, the Fasco A122 is the industry standard for Nordyne furnace repair.
Key Benefits
- Direct Compatibility: Engineered as a drop-in direct replacement for 903962 and 6219490 to eliminate field or bracket modifications.
- Industrial Build: Features ball bearings and a thermally protected shaded pole motor for consistent performance under high-ambient flue temperatures.
- Plug-and-Play Setup: Comes equipped with a 2-prong Molex harness and a ground wire for rapid electrical termination.
- Optimized Airflow: Rated for 3450 RPM to provide the precise CFM required to trigger pressure switches and ensure safe combustion.
Common Questions
Is this the correct replacement for my Nordyne furnace?
If your existing motor identifies as 903962, 6219490, or 7021-11227, the Fasco A122 is the specified technical substitute. Always verify the voltage (115V) and the round outlet configuration before installation.
Does this unit include a mounting gasket?
Standard packaging for the Fasco A122 inducer typically does not include a gasket. It is professional practice to use a high-temp silicone sealant or a separate fiberglass gasket to ensure a gas-tight seal at the collector box.
Can I use this to replace a 240V motor?
No. This is a dedicated 115V single-speed motor. Installing this on a 240V circuit will cause immediate winding failure and is a safety hazard.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $323.74
-65%$323.74
$113.31Fasco A122 Inducer Motor
The Fasco A122 Inducer Motor is a precision-engineered OEM replacement draft inducer designed specifically for Nordyne heating systems. Operating at 115V with a 3450 RPM single-speed rating, this unit is the direct replacement for Nordyne 903962, as well as 6219490 and 7021-11227. Built with a shaded pole motor and ball bearing construction, it ensures low-friction operation and enhanced thermal protection for long-cycle reliability in high-heat environments. As a veteran-grade furnace exhaust blower, the A122 features a 3.3-inch diameter motor and a round outlet optimized for standard flue connections. This centrifugal inducer is critical for maintaining proper static pressure and scavenging combustion gases before the ignition cycle. Its CWSE (Clockwise Shaft End) rotation and integrated 2-prong Molex plug facilitate a drop-in installation for contractors. When you need a 115V draft inducer motor that meets original equipment specifications for airflow and amperage draw, the Fasco A122 is the industry standard for Nordyne furnace repair.
Key Benefits
- Direct Compatibility: Engineered as a drop-in direct replacement for 903962 and 6219490 to eliminate field or bracket modifications.
- Industrial Build: Features ball bearings and a thermally protected shaded pole motor for consistent performance under high-ambient flue temperatures.
- Plug-and-Play Setup: Comes equipped with a 2-prong Molex harness and a ground wire for rapid electrical termination.
- Optimized Airflow: Rated for 3450 RPM to provide the precise CFM required to trigger pressure switches and ensure safe combustion.
Common Questions
Is this the correct replacement for my Nordyne furnace?
If your existing motor identifies as 903962, 6219490, or 7021-11227, the Fasco A122 is the specified technical substitute. Always verify the voltage (115V) and the round outlet configuration before installation.
Does this unit include a mounting gasket?
Standard packaging for the Fasco A122 inducer typically does not include a gasket. It is professional practice to use a high-temp silicone sealant or a separate fiberglass gasket to ensure a gas-tight seal at the collector box.
Can I use this to replace a 240V motor?
No. This is a dedicated 115V single-speed motor. Installing this on a 240V circuit will cause immediate winding failure and is a safety hazard.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Fasco A122 Inducer Motor is a precision-engineered OEM replacement draft inducer designed specifically for Nordyne heating systems. Operating at 115V with a 3450 RPM single-speed rating, this unit is the direct replacement for Nordyne 903962, as well as 6219490 and 7021-11227. Built with a shaded pole motor and ball bearing construction, it ensures low-friction operation and enhanced thermal protection for long-cycle reliability in high-heat environments. As a veteran-grade furnace exhaust blower, the A122 features a 3.3-inch diameter motor and a round outlet optimized for standard flue connections. This centrifugal inducer is critical for maintaining proper static pressure and scavenging combustion gases before the ignition cycle. Its CWSE (Clockwise Shaft End) rotation and integrated 2-prong Molex plug facilitate a drop-in installation for contractors. When you need a 115V draft inducer motor that meets original equipment specifications for airflow and amperage draw, the Fasco A122 is the industry standard for Nordyne furnace repair.
Key Benefits
- Direct Compatibility: Engineered as a drop-in direct replacement for 903962 and 6219490 to eliminate field or bracket modifications.
- Industrial Build: Features ball bearings and a thermally protected shaded pole motor for consistent performance under high-ambient flue temperatures.
- Plug-and-Play Setup: Comes equipped with a 2-prong Molex harness and a ground wire for rapid electrical termination.
- Optimized Airflow: Rated for 3450 RPM to provide the precise CFM required to trigger pressure switches and ensure safe combustion.
Common Questions
Is this the correct replacement for my Nordyne furnace?
If your existing motor identifies as 903962, 6219490, or 7021-11227, the Fasco A122 is the specified technical substitute. Always verify the voltage (115V) and the round outlet configuration before installation.
Does this unit include a mounting gasket?
Standard packaging for the Fasco A122 inducer typically does not include a gasket. It is professional practice to use a high-temp silicone sealant or a separate fiberglass gasket to ensure a gas-tight seal at the collector box.
Can I use this to replace a 240V motor?
No. This is a dedicated 115V single-speed motor. Installing this on a 240V circuit will cause immediate winding failure and is a safety hazard.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
