Fasco A066 Inducer
The Fasco A066 Inducer is a precision-engineered centrifugal blower designed for reliable flue gas evacuation in high-efficiency residential furnace systems. Operating at 1/30 HP with a maximum speed of 3000 RPM, this 120V single-speed inducer motor ensures optimal draft pressure to facilitate safe and efficient combustion cycles. Built for direct-drive applications, the Fasco A066 features a shaded pole design and thermal protection to handle the high-temperature demands of continuous exhaust venting. For field technicians, this assembly serves as a direct drop-in for Rheem and Ruud 70-22162-81 models, eliminating the need for extensive modification during emergency service calls. The 3.3-inch frame and sleeve bearing construction provide a balance of durability and low-noise operation, critical for maintaining static pressure requirements within the heat exchanger. When diagnosing ignition failure or pressure switch trips, replacing the assembly with this OEM-equivalent furnace blower ensures the system returns to factory specifications.
Key Performance Benefits
- High-Speed Exhaust Venting: The 3000 RPM 1-speed motor effectively clears flue gases to maintain proper pressure switch closure.
- Direct HVAC Replacement: Specifically engineered as a functional alternative for Rheem 70-24157-03 and Fasco 7021-9310 units.
- Quiet Operation: Precision-balanced blower wheel reduces vibration and mechanical noise during the pre-purge cycle.
- Rugged Construction: Features a durable housing and thermally protected motor to withstand high internal furnace temperatures.
- Simple Installation: Standard electrical leads and mounting configurations streamline the swap-out process for service contractors.
Common Contractor Questions
Is the Fasco A066 compatible with 208-230V systems?
No, this specific unit is rated for 115V/120V 60Hz operation only. Verification of line voltage is required before installation to prevent winding damage.
Does this assembly include the cooling fan and motor?
Yes, the A066 is a complete draft inducer assembly, including the motor, blower wheel, and housing for a comprehensive repair.
What are the primary causes for replacing this inducer?
Technicians typically replace this part due to bearing failure, cracked blower wheels, or a seized motor that prevents the pressure switch from completing the ignition circuit.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Fasco A066 Inducer
The Fasco A066 Inducer is a precision-engineered centrifugal blower designed for reliable flue gas evacuation in high-efficiency residential furnace systems. Operating at 1/30 HP with a maximum speed of 3000 RPM, this 120V single-speed inducer motor ensures optimal draft pressure to facilitate safe and efficient combustion cycles. Built for direct-drive applications, the Fasco A066 features a shaded pole design and thermal protection to handle the high-temperature demands of continuous exhaust venting. For field technicians, this assembly serves as a direct drop-in for Rheem and Ruud 70-22162-81 models, eliminating the need for extensive modification during emergency service calls. The 3.3-inch frame and sleeve bearing construction provide a balance of durability and low-noise operation, critical for maintaining static pressure requirements within the heat exchanger. When diagnosing ignition failure or pressure switch trips, replacing the assembly with this OEM-equivalent furnace blower ensures the system returns to factory specifications.
Key Performance Benefits
- High-Speed Exhaust Venting: The 3000 RPM 1-speed motor effectively clears flue gases to maintain proper pressure switch closure.
- Direct HVAC Replacement: Specifically engineered as a functional alternative for Rheem 70-24157-03 and Fasco 7021-9310 units.
- Quiet Operation: Precision-balanced blower wheel reduces vibration and mechanical noise during the pre-purge cycle.
- Rugged Construction: Features a durable housing and thermally protected motor to withstand high internal furnace temperatures.
- Simple Installation: Standard electrical leads and mounting configurations streamline the swap-out process for service contractors.
Common Contractor Questions
Is the Fasco A066 compatible with 208-230V systems?
No, this specific unit is rated for 115V/120V 60Hz operation only. Verification of line voltage is required before installation to prevent winding damage.
Does this assembly include the cooling fan and motor?
Yes, the A066 is a complete draft inducer assembly, including the motor, blower wheel, and housing for a comprehensive repair.
What are the primary causes for replacing this inducer?
Technicians typically replace this part due to bearing failure, cracked blower wheels, or a seized motor that prevents the pressure switch from completing the ignition circuit.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Fasco A066 Inducer is a precision-engineered centrifugal blower designed for reliable flue gas evacuation in high-efficiency residential furnace systems. Operating at 1/30 HP with a maximum speed of 3000 RPM, this 120V single-speed inducer motor ensures optimal draft pressure to facilitate safe and efficient combustion cycles. Built for direct-drive applications, the Fasco A066 features a shaded pole design and thermal protection to handle the high-temperature demands of continuous exhaust venting. For field technicians, this assembly serves as a direct drop-in for Rheem and Ruud 70-22162-81 models, eliminating the need for extensive modification during emergency service calls. The 3.3-inch frame and sleeve bearing construction provide a balance of durability and low-noise operation, critical for maintaining static pressure requirements within the heat exchanger. When diagnosing ignition failure or pressure switch trips, replacing the assembly with this OEM-equivalent furnace blower ensures the system returns to factory specifications.
Key Performance Benefits
- High-Speed Exhaust Venting: The 3000 RPM 1-speed motor effectively clears flue gases to maintain proper pressure switch closure.
- Direct HVAC Replacement: Specifically engineered as a functional alternative for Rheem 70-24157-03 and Fasco 7021-9310 units.
- Quiet Operation: Precision-balanced blower wheel reduces vibration and mechanical noise during the pre-purge cycle.
- Rugged Construction: Features a durable housing and thermally protected motor to withstand high internal furnace temperatures.
- Simple Installation: Standard electrical leads and mounting configurations streamline the swap-out process for service contractors.
Common Contractor Questions
Is the Fasco A066 compatible with 208-230V systems?
No, this specific unit is rated for 115V/120V 60Hz operation only. Verification of line voltage is required before installation to prevent winding damage.
Does this assembly include the cooling fan and motor?
Yes, the A066 is a complete draft inducer assembly, including the motor, blower wheel, and housing for a comprehensive repair.
What are the primary causes for replacing this inducer?
Technicians typically replace this part due to bearing failure, cracked blower wheels, or a seized motor that prevents the pressure switch from completing the ignition circuit.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
