Emerson Alco 097741 Connector Cable
The Emerson Alco 097741 is a high-performance EXV-M60 connector cable specifically engineered for seamless integration with EX4, EX5, EX6, EX7, and EX8 electrical control valves. This 6.0-meter (approximately 20-foot) assembly features a robust M12 plug-in connection designed to provide an IP67-rated seal when properly torqued, ensuring protection against moisture and contaminants in demanding refrigeration environments. As a critical link between the stepper motor-driven valve and the electronic controller, this 804665 reference cable utilizes a four-wire bipolar configuration (White, Black, Blue, and Brown) to facilitate precise refrigerant mass flow management in applications ranging from liquid injection to hot gas bypass.
Key Benefits- Optimized Length: The 6-meter span allows for flexible routing from the evaporator or machine room to the EXD-S/U or EC3-X33 superheat controller without excessive splicing.
- Hermetic Reliability: Engineered to maintain signal integrity across a broad temperature range of -50°C to +80°C, essential for low-temp refrigeration and process cooling.
- Vibration Resistance: Designed to withstand the mechanical stresses of high-capacity industrial chillers and heat pumps, maintaining a secure link to the Alco EX series valves.
- Standardized Wiring: Features industry-standard color-coded leads for rapid termination at the driver board, minimizing installation errors during stepper motor commissioning.
Is the EXV-M60 cable compatible with all Alco EX-series valves?
This cable is specifically designed for the EX4 through EX8 range. While they share the M12 interface, always verify that your specific stepper motor driver supports the 6-meter impedance for accurate step counts.
What is the proper procedure for securing the plug to the valve?
Technicians should push the plug onto the valve pins and rotate the nut clockwise. It is vital to continue this process until the plug is fully seated and tightened to achieve the IP67 protection rating.
Can this cable be used with R-744 (CO2) systems?
Yes, the 097741 assembly is suitable for use in systems running R-744, provided the EX expansion valve and controller are rated for the higher pressures associated with subcritical or transcritical CO2 applications.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Emerson Alco 097741 Connector Cable
The Emerson Alco 097741 is a high-performance EXV-M60 connector cable specifically engineered for seamless integration with EX4, EX5, EX6, EX7, and EX8 electrical control valves. This 6.0-meter (approximately 20-foot) assembly features a robust M12 plug-in connection designed to provide an IP67-rated seal when properly torqued, ensuring protection against moisture and contaminants in demanding refrigeration environments. As a critical link between the stepper motor-driven valve and the electronic controller, this 804665 reference cable utilizes a four-wire bipolar configuration (White, Black, Blue, and Brown) to facilitate precise refrigerant mass flow management in applications ranging from liquid injection to hot gas bypass.
Key Benefits- Optimized Length: The 6-meter span allows for flexible routing from the evaporator or machine room to the EXD-S/U or EC3-X33 superheat controller without excessive splicing.
- Hermetic Reliability: Engineered to maintain signal integrity across a broad temperature range of -50°C to +80°C, essential for low-temp refrigeration and process cooling.
- Vibration Resistance: Designed to withstand the mechanical stresses of high-capacity industrial chillers and heat pumps, maintaining a secure link to the Alco EX series valves.
- Standardized Wiring: Features industry-standard color-coded leads for rapid termination at the driver board, minimizing installation errors during stepper motor commissioning.
Is the EXV-M60 cable compatible with all Alco EX-series valves?
This cable is specifically designed for the EX4 through EX8 range. While they share the M12 interface, always verify that your specific stepper motor driver supports the 6-meter impedance for accurate step counts.
What is the proper procedure for securing the plug to the valve?
Technicians should push the plug onto the valve pins and rotate the nut clockwise. It is vital to continue this process until the plug is fully seated and tightened to achieve the IP67 protection rating.
Can this cable be used with R-744 (CO2) systems?
Yes, the 097741 assembly is suitable for use in systems running R-744, provided the EX expansion valve and controller are rated for the higher pressures associated with subcritical or transcritical CO2 applications.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Emerson Alco 097741 is a high-performance EXV-M60 connector cable specifically engineered for seamless integration with EX4, EX5, EX6, EX7, and EX8 electrical control valves. This 6.0-meter (approximately 20-foot) assembly features a robust M12 plug-in connection designed to provide an IP67-rated seal when properly torqued, ensuring protection against moisture and contaminants in demanding refrigeration environments. As a critical link between the stepper motor-driven valve and the electronic controller, this 804665 reference cable utilizes a four-wire bipolar configuration (White, Black, Blue, and Brown) to facilitate precise refrigerant mass flow management in applications ranging from liquid injection to hot gas bypass.
Key Benefits- Optimized Length: The 6-meter span allows for flexible routing from the evaporator or machine room to the EXD-S/U or EC3-X33 superheat controller without excessive splicing.
- Hermetic Reliability: Engineered to maintain signal integrity across a broad temperature range of -50°C to +80°C, essential for low-temp refrigeration and process cooling.
- Vibration Resistance: Designed to withstand the mechanical stresses of high-capacity industrial chillers and heat pumps, maintaining a secure link to the Alco EX series valves.
- Standardized Wiring: Features industry-standard color-coded leads for rapid termination at the driver board, minimizing installation errors during stepper motor commissioning.
Is the EXV-M60 cable compatible with all Alco EX-series valves?
This cable is specifically designed for the EX4 through EX8 range. While they share the M12 interface, always verify that your specific stepper motor driver supports the 6-meter impedance for accurate step counts.
What is the proper procedure for securing the plug to the valve?
Technicians should push the plug onto the valve pins and rotate the nut clockwise. It is vital to continue this process until the plug is fully seated and tightened to achieve the IP67 protection rating.
Can this cable be used with R-744 (CO2) systems?
Yes, the 097741 assembly is suitable for use in systems running R-744, provided the EX expansion valve and controller are rated for the higher pressures associated with subcritical or transcritical CO2 applications.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
