Dodge(Baldor) L1410T Motor
The Baldor-Reliance L1410T is a heavy-duty 5HP single phase motor engineered for high-torque industrial and HVACR applications. Operating at a base speed of 1725 RPM, this 4-pole induction motor is housed in a robust 184T frame with a classic open drip-proof (ODP) enclosure. Built with a heavy-gauge steel frame and pressure-cast aluminum end plates, it is designed to manage thermal loads efficiently in clean, dry environments. This general purpose motor features NEMA Design L characteristics, delivering the high starting torque required for demanding belt-driven equipment like industrial air compressors, centrifugal pumps, and commercial blowers.
Technicians will appreciate the internal ball bearings and dynamically balanced rotor, which minimize vibration and extend the mechanical life of the drive end. The 230V single phase configuration (rated at 21.0-23.0 Amps) includes a premium capacitor start/capacitor run design, ensuring smooth operational efficiency and a high power factor of 95. This unit is F1 foot-mounted with a 1.125-inch keyed shaft, making it a direct-drop replacement for standard 184T NEMA mounts. Whether you are surfacing a commercial HVAC blower or a material handling conveyor, the L1410T provides the 1.15 service factor needed for continuous duty cycles without compromising performance.
Key Benefits- High Starting Torque: Optimized capacitor start design provides the necessary breakaway force for heavy-load compressor duty applications.
- Superior Build Quality: Features copper windings and high-grade Class F insulation to withstand rigorous industrial thermal requirements.
- Enhanced Reliability: Equipped with 6206 drive end bearings and 6205 opposite drive end bearings for reduced maintenance downtime.
- Application Versatility: Standard 184T frame dimensions and a reversible rotation capability allow for easy integration into existing mechanical systems.
What is the difference between 1800 RPM and 1725 RPM for this motor?
While the synchronous speed is 1800 RPM, the nameplate RPM of 1725 reflects the actual speed under full load after accounting for slip, ensuring accurate performance metrics for your drive calculations.
Can this motor be used with a Variable Frequency Drive (VFD)?
No, this specific single phase induction motor is not inverter-rated. It is intended for across-the-line starting on standard 60Hz 230V power sources.
Is this motor suitable for outdoor use?
The OPEN enclosure (ODP) rating means it is designed for indoor or protected environments where it is shielded from direct water spray and heavy airborne contaminants.
This item must be shipped via trucking. Please contact us for a freight quote.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Dodge(Baldor) L1410T Motor
The Baldor-Reliance L1410T is a heavy-duty 5HP single phase motor engineered for high-torque industrial and HVACR applications. Operating at a base speed of 1725 RPM, this 4-pole induction motor is housed in a robust 184T frame with a classic open drip-proof (ODP) enclosure. Built with a heavy-gauge steel frame and pressure-cast aluminum end plates, it is designed to manage thermal loads efficiently in clean, dry environments. This general purpose motor features NEMA Design L characteristics, delivering the high starting torque required for demanding belt-driven equipment like industrial air compressors, centrifugal pumps, and commercial blowers.
Technicians will appreciate the internal ball bearings and dynamically balanced rotor, which minimize vibration and extend the mechanical life of the drive end. The 230V single phase configuration (rated at 21.0-23.0 Amps) includes a premium capacitor start/capacitor run design, ensuring smooth operational efficiency and a high power factor of 95. This unit is F1 foot-mounted with a 1.125-inch keyed shaft, making it a direct-drop replacement for standard 184T NEMA mounts. Whether you are surfacing a commercial HVAC blower or a material handling conveyor, the L1410T provides the 1.15 service factor needed for continuous duty cycles without compromising performance.
Key Benefits- High Starting Torque: Optimized capacitor start design provides the necessary breakaway force for heavy-load compressor duty applications.
- Superior Build Quality: Features copper windings and high-grade Class F insulation to withstand rigorous industrial thermal requirements.
- Enhanced Reliability: Equipped with 6206 drive end bearings and 6205 opposite drive end bearings for reduced maintenance downtime.
- Application Versatility: Standard 184T frame dimensions and a reversible rotation capability allow for easy integration into existing mechanical systems.
What is the difference between 1800 RPM and 1725 RPM for this motor?
While the synchronous speed is 1800 RPM, the nameplate RPM of 1725 reflects the actual speed under full load after accounting for slip, ensuring accurate performance metrics for your drive calculations.
Can this motor be used with a Variable Frequency Drive (VFD)?
No, this specific single phase induction motor is not inverter-rated. It is intended for across-the-line starting on standard 60Hz 230V power sources.
Is this motor suitable for outdoor use?
The OPEN enclosure (ODP) rating means it is designed for indoor or protected environments where it is shielded from direct water spray and heavy airborne contaminants.
This item must be shipped via trucking. Please contact us for a freight quote.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Baldor-Reliance L1410T is a heavy-duty 5HP single phase motor engineered for high-torque industrial and HVACR applications. Operating at a base speed of 1725 RPM, this 4-pole induction motor is housed in a robust 184T frame with a classic open drip-proof (ODP) enclosure. Built with a heavy-gauge steel frame and pressure-cast aluminum end plates, it is designed to manage thermal loads efficiently in clean, dry environments. This general purpose motor features NEMA Design L characteristics, delivering the high starting torque required for demanding belt-driven equipment like industrial air compressors, centrifugal pumps, and commercial blowers.
Technicians will appreciate the internal ball bearings and dynamically balanced rotor, which minimize vibration and extend the mechanical life of the drive end. The 230V single phase configuration (rated at 21.0-23.0 Amps) includes a premium capacitor start/capacitor run design, ensuring smooth operational efficiency and a high power factor of 95. This unit is F1 foot-mounted with a 1.125-inch keyed shaft, making it a direct-drop replacement for standard 184T NEMA mounts. Whether you are surfacing a commercial HVAC blower or a material handling conveyor, the L1410T provides the 1.15 service factor needed for continuous duty cycles without compromising performance.
Key Benefits- High Starting Torque: Optimized capacitor start design provides the necessary breakaway force for heavy-load compressor duty applications.
- Superior Build Quality: Features copper windings and high-grade Class F insulation to withstand rigorous industrial thermal requirements.
- Enhanced Reliability: Equipped with 6206 drive end bearings and 6205 opposite drive end bearings for reduced maintenance downtime.
- Application Versatility: Standard 184T frame dimensions and a reversible rotation capability allow for easy integration into existing mechanical systems.
What is the difference between 1800 RPM and 1725 RPM for this motor?
While the synchronous speed is 1800 RPM, the nameplate RPM of 1725 reflects the actual speed under full load after accounting for slip, ensuring accurate performance metrics for your drive calculations.
Can this motor be used with a Variable Frequency Drive (VFD)?
No, this specific single phase induction motor is not inverter-rated. It is intended for across-the-line starting on standard 60Hz 230V power sources.
Is this motor suitable for outdoor use?
The OPEN enclosure (ODP) rating means it is designed for indoor or protected environments where it is shielded from direct water spray and heavy airborne contaminants.
This item must be shipped via trucking. Please contact us for a freight quote.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
