Danfoss 034G2201 Cable
The Danfoss 034G2201 is a high-performance M12 female straight connection cable designed specifically for demanding HVACR control environments. Featuring a standard 6.6-foot (2m) length, this OEM accessory provides a critical interface between electronic expansion valves (EEV) and ADAP-KOOL controllers. This specific stepper motor cable is optimized for use with the Danfoss ETS series including the ETS 12.5 through ETS 400, as well as KVS series electric suction modulating valves. Built with durable PVC insulation, it maintains electrical integrity across a wide operating temperature range of -50°C to 80°C (-58°F to 176°F), ensuring precise signal transmission for bipolar stepper motors in both high-pressure and low-temperature applications.
For technicians in the field, the Danfoss 034G2201 cable simplifies the integration of electric regulating valves into existing PLC or controller frameworks. The M12 4-pin connector provides a secure, vibration-resistant coupling that is essential for maintaining the accurate valve positioning required in modern supermarket refrigeration and commercial air conditioning systems. By utilizing this OEM Danfoss cable, contractors ensure full compatibility with the AST motor housing, preventing communication errors that can lead to unstable superheat control or system inefficiency. Its straight-way connector design is ideal for installations with clear vertical or horizontal clearance, ensuring a professional, clean finish to any valve assembly.
Key Benefits for HVACR Installations:- Universal Compatibility: Engineered for Danfoss ETS 50, ETS 100, and KVS 15/2C/3C series valves.
- Precise Signal Integrity: Optimized for 2-phase bipolar stepper motors to ensure accurate valve modulation.
- Field-Proven Durability: The PVC jacket and M12 housing are rated for industrial environments with high temperature fluctuations.
- Standardized Fitment: Plug-and-play M12 female straight connector eliminates the need for custom wiring harnesses.
- Regulatory Compliance: Meets CE, RoHS, and UKCA standards for safety and environmental requirements.
Is the 034G2201 cable compatible with both 2m and 8m valve variants?
This specific part number refers to the 2m (6.6') version. While the M12 connection is standard, always verify the required cable run to avoid tension on the motor housing.
Can this cable be used with non-Danfoss stepper motor valves?
While M12 is a common industrial standard, the internal pin configuration and wire gauge are tailored for Danfoss electric expansion valves. It is strongly recommended to use this only with the specified ETS, KVS, and CCM valve series.
Does this cable include the screw-on terminal for the controller side?
The 034G2201 features a molded M12 female connector on one end for the valve, while the other end typically features flying leads for direct termination into the controller terminal blocks.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $24.73
-65%$24.73
$8.66Danfoss 034G2201 Cable
The Danfoss 034G2201 is a high-performance M12 female straight connection cable designed specifically for demanding HVACR control environments. Featuring a standard 6.6-foot (2m) length, this OEM accessory provides a critical interface between electronic expansion valves (EEV) and ADAP-KOOL controllers. This specific stepper motor cable is optimized for use with the Danfoss ETS series including the ETS 12.5 through ETS 400, as well as KVS series electric suction modulating valves. Built with durable PVC insulation, it maintains electrical integrity across a wide operating temperature range of -50°C to 80°C (-58°F to 176°F), ensuring precise signal transmission for bipolar stepper motors in both high-pressure and low-temperature applications.
For technicians in the field, the Danfoss 034G2201 cable simplifies the integration of electric regulating valves into existing PLC or controller frameworks. The M12 4-pin connector provides a secure, vibration-resistant coupling that is essential for maintaining the accurate valve positioning required in modern supermarket refrigeration and commercial air conditioning systems. By utilizing this OEM Danfoss cable, contractors ensure full compatibility with the AST motor housing, preventing communication errors that can lead to unstable superheat control or system inefficiency. Its straight-way connector design is ideal for installations with clear vertical or horizontal clearance, ensuring a professional, clean finish to any valve assembly.
Key Benefits for HVACR Installations:- Universal Compatibility: Engineered for Danfoss ETS 50, ETS 100, and KVS 15/2C/3C series valves.
- Precise Signal Integrity: Optimized for 2-phase bipolar stepper motors to ensure accurate valve modulation.
- Field-Proven Durability: The PVC jacket and M12 housing are rated for industrial environments with high temperature fluctuations.
- Standardized Fitment: Plug-and-play M12 female straight connector eliminates the need for custom wiring harnesses.
- Regulatory Compliance: Meets CE, RoHS, and UKCA standards for safety and environmental requirements.
Is the 034G2201 cable compatible with both 2m and 8m valve variants?
This specific part number refers to the 2m (6.6') version. While the M12 connection is standard, always verify the required cable run to avoid tension on the motor housing.
Can this cable be used with non-Danfoss stepper motor valves?
While M12 is a common industrial standard, the internal pin configuration and wire gauge are tailored for Danfoss electric expansion valves. It is strongly recommended to use this only with the specified ETS, KVS, and CCM valve series.
Does this cable include the screw-on terminal for the controller side?
The 034G2201 features a molded M12 female connector on one end for the valve, while the other end typically features flying leads for direct termination into the controller terminal blocks.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Danfoss 034G2201 is a high-performance M12 female straight connection cable designed specifically for demanding HVACR control environments. Featuring a standard 6.6-foot (2m) length, this OEM accessory provides a critical interface between electronic expansion valves (EEV) and ADAP-KOOL controllers. This specific stepper motor cable is optimized for use with the Danfoss ETS series including the ETS 12.5 through ETS 400, as well as KVS series electric suction modulating valves. Built with durable PVC insulation, it maintains electrical integrity across a wide operating temperature range of -50°C to 80°C (-58°F to 176°F), ensuring precise signal transmission for bipolar stepper motors in both high-pressure and low-temperature applications.
For technicians in the field, the Danfoss 034G2201 cable simplifies the integration of electric regulating valves into existing PLC or controller frameworks. The M12 4-pin connector provides a secure, vibration-resistant coupling that is essential for maintaining the accurate valve positioning required in modern supermarket refrigeration and commercial air conditioning systems. By utilizing this OEM Danfoss cable, contractors ensure full compatibility with the AST motor housing, preventing communication errors that can lead to unstable superheat control or system inefficiency. Its straight-way connector design is ideal for installations with clear vertical or horizontal clearance, ensuring a professional, clean finish to any valve assembly.
Key Benefits for HVACR Installations:- Universal Compatibility: Engineered for Danfoss ETS 50, ETS 100, and KVS 15/2C/3C series valves.
- Precise Signal Integrity: Optimized for 2-phase bipolar stepper motors to ensure accurate valve modulation.
- Field-Proven Durability: The PVC jacket and M12 housing are rated for industrial environments with high temperature fluctuations.
- Standardized Fitment: Plug-and-play M12 female straight connector eliminates the need for custom wiring harnesses.
- Regulatory Compliance: Meets CE, RoHS, and UKCA standards for safety and environmental requirements.
Is the 034G2201 cable compatible with both 2m and 8m valve variants?
This specific part number refers to the 2m (6.6') version. While the M12 connection is standard, always verify the required cable run to avoid tension on the motor housing.
Can this cable be used with non-Danfoss stepper motor valves?
While M12 is a common industrial standard, the internal pin configuration and wire gauge are tailored for Danfoss electric expansion valves. It is strongly recommended to use this only with the specified ETS, KVS, and CCM valve series.
Does this cable include the screw-on terminal for the controller side?
The 034G2201 features a molded M12 female connector on one end for the valve, while the other end typically features flying leads for direct termination into the controller terminal blocks.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
