Daikin-McQuay 070199009 Gasket
The Daikin-McQuay 070199009 Gasket is a critical OEM component engineered for high-pressure oil filtration systems in commercial HVAC equipment. Specifically designed as an oil filter spin-down gasket, this 070199009 O-ring features a specialized six-hole configuration to ensure positive displacement and a leak-proof seal during intense thermal cycles. With an approximate 4-inch internal diameter (ID) and 4.62-inch outside diameter (OD), this gasket acts as the primary seal for oil filter cover assemblies, preventing catastrophic oil loss and maintaining the vacuum integrity of the lubrication circuit.
Professional technicians rely on this 070199009 replacement to restore factory-spec sealing in Daikin-McQuay centrifugal chillers, including water-cooled models like the WCC series. This gasket replaces legacy part numbers 350A130H42, 701990A-09, and 735013042. Its high-grade elastomeric construction is formulated for superior resistance to synthetic and mineral-based refrigeration oils, ensuring the seal remains pliable even under high-load operating conditions without degrading or losing its compression set.
Key Benefits:- OEM Precision Fit: Direct replacement for McQuay 070199009, ensuring perfect alignment with the 6-hole bolt pattern on oil filter housings.
- Industrial-Grade Sealing: Engineered to withstand the high pressures of centrifugal chiller oil systems without leaking.
- Broad Compatibility: Cross-references with 350A130H42 and 735013042 for legacy maintenance and modern system support.
- Thermal and Chemical Resistance: Formulated to maintain structural integrity when exposed to harsh refrigeration lubricants and fluctuating temperatures.
Is this gasket compatible with all McQuay centrifugal chillers?
The 070199009 is specifically designed for oil filter and spin-down assemblies in several centrifugal models. To ensure exact fitment, verify your unit's serial number and model designation, such as those in the WCC range.
Does this part include the necessary mounting bolts?
No, this part number refers specifically to the 6-hole O-ring gasket. Existing hardware should be inspected for wear and replaced if necessary during the filter changeout.
Can I use this as a substitute for a standard flat gasket?
This is an O-ring style gasket specifically molded with six mounting holes. It should only be used in assemblies designed for this exact 070199009 specification to prevent improper sealing and potential system failure.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $18.87
-65%$18.87
$6.60Daikin-McQuay 070199009 Gasket
The Daikin-McQuay 070199009 Gasket is a critical OEM component engineered for high-pressure oil filtration systems in commercial HVAC equipment. Specifically designed as an oil filter spin-down gasket, this 070199009 O-ring features a specialized six-hole configuration to ensure positive displacement and a leak-proof seal during intense thermal cycles. With an approximate 4-inch internal diameter (ID) and 4.62-inch outside diameter (OD), this gasket acts as the primary seal for oil filter cover assemblies, preventing catastrophic oil loss and maintaining the vacuum integrity of the lubrication circuit.
Professional technicians rely on this 070199009 replacement to restore factory-spec sealing in Daikin-McQuay centrifugal chillers, including water-cooled models like the WCC series. This gasket replaces legacy part numbers 350A130H42, 701990A-09, and 735013042. Its high-grade elastomeric construction is formulated for superior resistance to synthetic and mineral-based refrigeration oils, ensuring the seal remains pliable even under high-load operating conditions without degrading or losing its compression set.
Key Benefits:- OEM Precision Fit: Direct replacement for McQuay 070199009, ensuring perfect alignment with the 6-hole bolt pattern on oil filter housings.
- Industrial-Grade Sealing: Engineered to withstand the high pressures of centrifugal chiller oil systems without leaking.
- Broad Compatibility: Cross-references with 350A130H42 and 735013042 for legacy maintenance and modern system support.
- Thermal and Chemical Resistance: Formulated to maintain structural integrity when exposed to harsh refrigeration lubricants and fluctuating temperatures.
Is this gasket compatible with all McQuay centrifugal chillers?
The 070199009 is specifically designed for oil filter and spin-down assemblies in several centrifugal models. To ensure exact fitment, verify your unit's serial number and model designation, such as those in the WCC range.
Does this part include the necessary mounting bolts?
No, this part number refers specifically to the 6-hole O-ring gasket. Existing hardware should be inspected for wear and replaced if necessary during the filter changeout.
Can I use this as a substitute for a standard flat gasket?
This is an O-ring style gasket specifically molded with six mounting holes. It should only be used in assemblies designed for this exact 070199009 specification to prevent improper sealing and potential system failure.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Daikin-McQuay 070199009 Gasket is a critical OEM component engineered for high-pressure oil filtration systems in commercial HVAC equipment. Specifically designed as an oil filter spin-down gasket, this 070199009 O-ring features a specialized six-hole configuration to ensure positive displacement and a leak-proof seal during intense thermal cycles. With an approximate 4-inch internal diameter (ID) and 4.62-inch outside diameter (OD), this gasket acts as the primary seal for oil filter cover assemblies, preventing catastrophic oil loss and maintaining the vacuum integrity of the lubrication circuit.
Professional technicians rely on this 070199009 replacement to restore factory-spec sealing in Daikin-McQuay centrifugal chillers, including water-cooled models like the WCC series. This gasket replaces legacy part numbers 350A130H42, 701990A-09, and 735013042. Its high-grade elastomeric construction is formulated for superior resistance to synthetic and mineral-based refrigeration oils, ensuring the seal remains pliable even under high-load operating conditions without degrading or losing its compression set.
Key Benefits:- OEM Precision Fit: Direct replacement for McQuay 070199009, ensuring perfect alignment with the 6-hole bolt pattern on oil filter housings.
- Industrial-Grade Sealing: Engineered to withstand the high pressures of centrifugal chiller oil systems without leaking.
- Broad Compatibility: Cross-references with 350A130H42 and 735013042 for legacy maintenance and modern system support.
- Thermal and Chemical Resistance: Formulated to maintain structural integrity when exposed to harsh refrigeration lubricants and fluctuating temperatures.
Is this gasket compatible with all McQuay centrifugal chillers?
The 070199009 is specifically designed for oil filter and spin-down assemblies in several centrifugal models. To ensure exact fitment, verify your unit's serial number and model designation, such as those in the WCC range.
Does this part include the necessary mounting bolts?
No, this part number refers specifically to the 6-hole O-ring gasket. Existing hardware should be inspected for wear and replaced if necessary during the filter changeout.
Can I use this as a substitute for a standard flat gasket?
This is an O-ring style gasket specifically molded with six mounting holes. It should only be used in assemblies designed for this exact 070199009 specification to prevent improper sealing and potential system failure.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
