Daikin-McQuay 059974605 Temperature Sensor
The Daikin-McQuay 059974605 Temperature Sensor is a precision-engineered OEM replacement thermistor designed for high-accuracy thermal monitoring in light commercial and industrial HVACR environments. Built with 50-foot leads, this sensor provides the extended reach necessary for mounting in remote return air ducts or critical discharge air locations, ensuring the MicroTech III unit controller receives stable, real-time data for optimized compressor stages and fan modulation. As a technician, you know that lead length and shielding are vital to prevent EMI interference; this factory-spec component maintains signal integrity over its full length, eliminating the calibration drift common with generic alternatives.
This 50' sensor is the designated 059974605 HVAC sensor replacement for legacy part numbers 059974601 through 059974604, as well as 065829501 through 065829505. Integrating this Daikin 50ft temp sensor into your building automation system (BAS) ensures tight control over discharge air temperatures (DAT) and return air monitoring. When installing, ensure the thermistor is isolated from direct sunlight or radiant heat sources to maintain the precision required for efficient HVAC system performance and automated preventative maintenance protocols.
Key Benefits- Extended 50-Foot Reach: Facilitates flexible sensor placement in large-scale air handlers, PTAC units, and water-source heat pumps.
- OEM Compatibility: Replaces multiple legacy McQuay and Allen-Bradley sensor revisions, ensuring 100% plug-and-play fitment with MicroTech controllers.
- Precise Thermal Feedback: Delivers accurate resistance-to-temperature conversion for critical climate control and industrial equipment monitoring.
- Durable Construction: Engineered to withstand high-airflow environments and industrial-grade temperature fluctuations without signal degradation.
Can I trim the 50-foot leads to a shorter length?
While the leads can physically be shortened, it is best practice to coil and secure excess wire. Changing the lead length can slightly alter the resistance value, which may necessitate recalibrating the controller to maintain sub-degree accuracy.
Where is the best mounting location for a discharge air temperature (DAT) reading?
For the most accurate readings, we recommend installing the sensor approximately 2 to 3 feet downstream of the fan housing, where the airflow is most uniform and less prone to turbulence.
Will this sensor work with non-Daikin controllers?
This is a 10k or similar curve thermistor (depending on specific revision) designed primarily for Daikin-McQuay MicroTech and generic BACnet/LONWORKS interfaces. Always verify the resistance curve of your specific controller before installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Daikin-McQuay 059974605 Temperature Sensor
The Daikin-McQuay 059974605 Temperature Sensor is a precision-engineered OEM replacement thermistor designed for high-accuracy thermal monitoring in light commercial and industrial HVACR environments. Built with 50-foot leads, this sensor provides the extended reach necessary for mounting in remote return air ducts or critical discharge air locations, ensuring the MicroTech III unit controller receives stable, real-time data for optimized compressor stages and fan modulation. As a technician, you know that lead length and shielding are vital to prevent EMI interference; this factory-spec component maintains signal integrity over its full length, eliminating the calibration drift common with generic alternatives.
This 50' sensor is the designated 059974605 HVAC sensor replacement for legacy part numbers 059974601 through 059974604, as well as 065829501 through 065829505. Integrating this Daikin 50ft temp sensor into your building automation system (BAS) ensures tight control over discharge air temperatures (DAT) and return air monitoring. When installing, ensure the thermistor is isolated from direct sunlight or radiant heat sources to maintain the precision required for efficient HVAC system performance and automated preventative maintenance protocols.
Key Benefits- Extended 50-Foot Reach: Facilitates flexible sensor placement in large-scale air handlers, PTAC units, and water-source heat pumps.
- OEM Compatibility: Replaces multiple legacy McQuay and Allen-Bradley sensor revisions, ensuring 100% plug-and-play fitment with MicroTech controllers.
- Precise Thermal Feedback: Delivers accurate resistance-to-temperature conversion for critical climate control and industrial equipment monitoring.
- Durable Construction: Engineered to withstand high-airflow environments and industrial-grade temperature fluctuations without signal degradation.
Can I trim the 50-foot leads to a shorter length?
While the leads can physically be shortened, it is best practice to coil and secure excess wire. Changing the lead length can slightly alter the resistance value, which may necessitate recalibrating the controller to maintain sub-degree accuracy.
Where is the best mounting location for a discharge air temperature (DAT) reading?
For the most accurate readings, we recommend installing the sensor approximately 2 to 3 feet downstream of the fan housing, where the airflow is most uniform and less prone to turbulence.
Will this sensor work with non-Daikin controllers?
This is a 10k or similar curve thermistor (depending on specific revision) designed primarily for Daikin-McQuay MicroTech and generic BACnet/LONWORKS interfaces. Always verify the resistance curve of your specific controller before installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Daikin-McQuay 059974605 Temperature Sensor is a precision-engineered OEM replacement thermistor designed for high-accuracy thermal monitoring in light commercial and industrial HVACR environments. Built with 50-foot leads, this sensor provides the extended reach necessary for mounting in remote return air ducts or critical discharge air locations, ensuring the MicroTech III unit controller receives stable, real-time data for optimized compressor stages and fan modulation. As a technician, you know that lead length and shielding are vital to prevent EMI interference; this factory-spec component maintains signal integrity over its full length, eliminating the calibration drift common with generic alternatives.
This 50' sensor is the designated 059974605 HVAC sensor replacement for legacy part numbers 059974601 through 059974604, as well as 065829501 through 065829505. Integrating this Daikin 50ft temp sensor into your building automation system (BAS) ensures tight control over discharge air temperatures (DAT) and return air monitoring. When installing, ensure the thermistor is isolated from direct sunlight or radiant heat sources to maintain the precision required for efficient HVAC system performance and automated preventative maintenance protocols.
Key Benefits- Extended 50-Foot Reach: Facilitates flexible sensor placement in large-scale air handlers, PTAC units, and water-source heat pumps.
- OEM Compatibility: Replaces multiple legacy McQuay and Allen-Bradley sensor revisions, ensuring 100% plug-and-play fitment with MicroTech controllers.
- Precise Thermal Feedback: Delivers accurate resistance-to-temperature conversion for critical climate control and industrial equipment monitoring.
- Durable Construction: Engineered to withstand high-airflow environments and industrial-grade temperature fluctuations without signal degradation.
Can I trim the 50-foot leads to a shorter length?
While the leads can physically be shortened, it is best practice to coil and secure excess wire. Changing the lead length can slightly alter the resistance value, which may necessitate recalibrating the controller to maintain sub-degree accuracy.
Where is the best mounting location for a discharge air temperature (DAT) reading?
For the most accurate readings, we recommend installing the sensor approximately 2 to 3 feet downstream of the fan housing, where the airflow is most uniform and less prone to turbulence.
Will this sensor work with non-Daikin controllers?
This is a 10k or similar curve thermistor (depending on specific revision) designed primarily for Daikin-McQuay MicroTech and generic BACnet/LONWORKS interfaces. Always verify the resistance curve of your specific controller before installation.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
