Copeland 918-0097-00 Crankcase Heater Kit
The Copeland 918-0097-00 is an essential 120v 20W Crankcase Heater Kit designed to maintain critical compressor temperatures during off-cycles. Engineered specifically for RFT, RRT, and RST model compressors, this wrap-around heating element prevents refrigerant migration and liquid slugging, which are the primary causes of compressor bearing failure during cold starts. By keeping the crankcase oil at a consistent temperature, the Copeland 918-0097-00 ensures that the oil remains fluid even in low ambient conditions, facilitating immediate oil pressure development and proper lubrication the moment the system cycles on. This kit includes the heater element and the necessary mounting hardware, providing a precise fit that eliminates the risks associated with generic belly-band heaters. For technicians servicing commercial refrigeration or industrial air conditioning units, installing this HVAC compressor heater is a standard best practice to prevent refrigerant dilution of the oil and to reduce mechanical stress on the drive train during startup.
Key Benefits:- Prevents Refrigerant Migration: Stops refrigerant vapor from condensing into the oil during the off-cycle, preventing catastrophic "slugging."
- Optimized 20W Output: Specifically calibrated to provide sufficient warmth without carbonizing the compressor oil.
- Direct Fit Compatibility: Purpose-built for Copeland RST/RRT/RFT compressors, ensuring maximum heat transfer to the housing.
- Simplified Installation: Comes complete with an integrated mounting bracket and hardware for efficient field replacement.
- Low Ambient Protection: Critical for outdoor condensing units where cold oil can become too viscous for the oil pump to handle.
Is the 918-0097-00 compatible with higher voltage systems?
No, this specific model is a dedicated 120V component. For 240V applications, use the corresponding Copeland part number to match the system's control circuit voltage.
Can this heater be used on other compressor brands?
This wrap-around kit is designed to fit the specific shell diameter of Copeland RFT, RRT, and RST models. Verify shell diameter and wattage requirements before attempting installation on non-specified models.
Should the crankcase heater run while the compressor is operating?
Generally, crankcase heaters are wired to be energized when the compressor is off. Continuous operation during the run cycle is typically unnecessary and less energy efficient.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Copeland 918-0097-00 Crankcase Heater Kit
The Copeland 918-0097-00 is an essential 120v 20W Crankcase Heater Kit designed to maintain critical compressor temperatures during off-cycles. Engineered specifically for RFT, RRT, and RST model compressors, this wrap-around heating element prevents refrigerant migration and liquid slugging, which are the primary causes of compressor bearing failure during cold starts. By keeping the crankcase oil at a consistent temperature, the Copeland 918-0097-00 ensures that the oil remains fluid even in low ambient conditions, facilitating immediate oil pressure development and proper lubrication the moment the system cycles on. This kit includes the heater element and the necessary mounting hardware, providing a precise fit that eliminates the risks associated with generic belly-band heaters. For technicians servicing commercial refrigeration or industrial air conditioning units, installing this HVAC compressor heater is a standard best practice to prevent refrigerant dilution of the oil and to reduce mechanical stress on the drive train during startup.
Key Benefits:- Prevents Refrigerant Migration: Stops refrigerant vapor from condensing into the oil during the off-cycle, preventing catastrophic "slugging."
- Optimized 20W Output: Specifically calibrated to provide sufficient warmth without carbonizing the compressor oil.
- Direct Fit Compatibility: Purpose-built for Copeland RST/RRT/RFT compressors, ensuring maximum heat transfer to the housing.
- Simplified Installation: Comes complete with an integrated mounting bracket and hardware for efficient field replacement.
- Low Ambient Protection: Critical for outdoor condensing units where cold oil can become too viscous for the oil pump to handle.
Is the 918-0097-00 compatible with higher voltage systems?
No, this specific model is a dedicated 120V component. For 240V applications, use the corresponding Copeland part number to match the system's control circuit voltage.
Can this heater be used on other compressor brands?
This wrap-around kit is designed to fit the specific shell diameter of Copeland RFT, RRT, and RST models. Verify shell diameter and wattage requirements before attempting installation on non-specified models.
Should the crankcase heater run while the compressor is operating?
Generally, crankcase heaters are wired to be energized when the compressor is off. Continuous operation during the run cycle is typically unnecessary and less energy efficient.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Copeland 918-0097-00 is an essential 120v 20W Crankcase Heater Kit designed to maintain critical compressor temperatures during off-cycles. Engineered specifically for RFT, RRT, and RST model compressors, this wrap-around heating element prevents refrigerant migration and liquid slugging, which are the primary causes of compressor bearing failure during cold starts. By keeping the crankcase oil at a consistent temperature, the Copeland 918-0097-00 ensures that the oil remains fluid even in low ambient conditions, facilitating immediate oil pressure development and proper lubrication the moment the system cycles on. This kit includes the heater element and the necessary mounting hardware, providing a precise fit that eliminates the risks associated with generic belly-band heaters. For technicians servicing commercial refrigeration or industrial air conditioning units, installing this HVAC compressor heater is a standard best practice to prevent refrigerant dilution of the oil and to reduce mechanical stress on the drive train during startup.
Key Benefits:- Prevents Refrigerant Migration: Stops refrigerant vapor from condensing into the oil during the off-cycle, preventing catastrophic "slugging."
- Optimized 20W Output: Specifically calibrated to provide sufficient warmth without carbonizing the compressor oil.
- Direct Fit Compatibility: Purpose-built for Copeland RST/RRT/RFT compressors, ensuring maximum heat transfer to the housing.
- Simplified Installation: Comes complete with an integrated mounting bracket and hardware for efficient field replacement.
- Low Ambient Protection: Critical for outdoor condensing units where cold oil can become too viscous for the oil pump to handle.
Is the 918-0097-00 compatible with higher voltage systems?
No, this specific model is a dedicated 120V component. For 240V applications, use the corresponding Copeland part number to match the system's control circuit voltage.
Can this heater be used on other compressor brands?
This wrap-around kit is designed to fit the specific shell diameter of Copeland RFT, RRT, and RST models. Verify shell diameter and wattage requirements before attempting installation on non-specified models.
Should the crankcase heater run while the compressor is operating?
Generally, crankcase heaters are wired to be energized when the compressor is off. Continuous operation during the run cycle is typically unnecessary and less energy efficient.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
