Copeland 918-0056-21 Heater
For industrial refrigeration and commercial HVAC systems, the Copeland 918-0056-21 480V crankcase heater is a mission-critical component designed for robust compressor protection. Operating at 480 Volts, this crankcase heater ensures that the oil reservoir remains above the refrigerant saturation point during off-cycles. This thermal regulation is essential to prevent refrigerant migration, which can lead to hazardous oil dilution and liquid slugging upon system startup. By maintaining a high concentration of pure lubricant, this heater safeguards the internal bearings and scroll sets from premature wear caused by lack of lubrication. The 918-0056-21 replacement heater is an OEM-spec part, providing the exact wattage and lead length required for seamless integration with Copeland compressors. For contractors performing preventative maintenance, verifying the resistance and power supply of this 480V heater is standard practice to avoid catastrophic compressor failure and ensure long-term system reliability in demanding high-voltage environments.
Key Benefits for the Contractor- Prevents Flooded Starts: Stops liquid refrigerant from condensing in the oil, eliminating foam-over and bearing washout at startup.
- OEM Compatibility: Specifically designed as a direct 918-0056-21 replacement for precise fitment on Copeland industrial compressors.
- High-Voltage Performance: Engineered for 480V industrial power supplies, providing consistent heat output without the need for step-down transformers.
- Protects System Integrity: Minimizes the risk of liquid slugging, which can shatter internal valve plates or damage scroll geometry.
- Durable Infrastructure: Built with industrial-grade materials to withstand the thermal expansion and contraction cycles typical of HVACR refrigeration units.
Why is a 480V crankcase heater necessary even in warm environments?
Even in moderate temperatures, the compressor crankcase can become the coolest part of the system during the off-cycle. This temperature differential triggers refrigerant migration. The 918-0056-21 heater maintains the oil temperature high enough to keep refrigerant in a vapor state, ensuring the pump is ready for a safe start.
How do I verify if the heater is functioning properly?
A veteran technician should perform a continuity test or check the amperage draw while the unit is energized. If the heater is cold to the touch during a compressor off-cycle, it likely has an open circuit and requires immediate replacement to prevent oil saturation.
Can I use this heater on a 240V system?
No. The 918-0056-21 is hard-wired for 480V operation. Installing it on a lower voltage will result in insufficient wattage output, failing to provide the necessary heat to prevent oil dilution and potentially leading to compressor damage.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $128.10
-65%$128.10
$44.83Copeland 918-0056-21 Heater
For industrial refrigeration and commercial HVAC systems, the Copeland 918-0056-21 480V crankcase heater is a mission-critical component designed for robust compressor protection. Operating at 480 Volts, this crankcase heater ensures that the oil reservoir remains above the refrigerant saturation point during off-cycles. This thermal regulation is essential to prevent refrigerant migration, which can lead to hazardous oil dilution and liquid slugging upon system startup. By maintaining a high concentration of pure lubricant, this heater safeguards the internal bearings and scroll sets from premature wear caused by lack of lubrication. The 918-0056-21 replacement heater is an OEM-spec part, providing the exact wattage and lead length required for seamless integration with Copeland compressors. For contractors performing preventative maintenance, verifying the resistance and power supply of this 480V heater is standard practice to avoid catastrophic compressor failure and ensure long-term system reliability in demanding high-voltage environments.
Key Benefits for the Contractor- Prevents Flooded Starts: Stops liquid refrigerant from condensing in the oil, eliminating foam-over and bearing washout at startup.
- OEM Compatibility: Specifically designed as a direct 918-0056-21 replacement for precise fitment on Copeland industrial compressors.
- High-Voltage Performance: Engineered for 480V industrial power supplies, providing consistent heat output without the need for step-down transformers.
- Protects System Integrity: Minimizes the risk of liquid slugging, which can shatter internal valve plates or damage scroll geometry.
- Durable Infrastructure: Built with industrial-grade materials to withstand the thermal expansion and contraction cycles typical of HVACR refrigeration units.
Why is a 480V crankcase heater necessary even in warm environments?
Even in moderate temperatures, the compressor crankcase can become the coolest part of the system during the off-cycle. This temperature differential triggers refrigerant migration. The 918-0056-21 heater maintains the oil temperature high enough to keep refrigerant in a vapor state, ensuring the pump is ready for a safe start.
How do I verify if the heater is functioning properly?
A veteran technician should perform a continuity test or check the amperage draw while the unit is energized. If the heater is cold to the touch during a compressor off-cycle, it likely has an open circuit and requires immediate replacement to prevent oil saturation.
Can I use this heater on a 240V system?
No. The 918-0056-21 is hard-wired for 480V operation. Installing it on a lower voltage will result in insufficient wattage output, failing to provide the necessary heat to prevent oil dilution and potentially leading to compressor damage.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
For industrial refrigeration and commercial HVAC systems, the Copeland 918-0056-21 480V crankcase heater is a mission-critical component designed for robust compressor protection. Operating at 480 Volts, this crankcase heater ensures that the oil reservoir remains above the refrigerant saturation point during off-cycles. This thermal regulation is essential to prevent refrigerant migration, which can lead to hazardous oil dilution and liquid slugging upon system startup. By maintaining a high concentration of pure lubricant, this heater safeguards the internal bearings and scroll sets from premature wear caused by lack of lubrication. The 918-0056-21 replacement heater is an OEM-spec part, providing the exact wattage and lead length required for seamless integration with Copeland compressors. For contractors performing preventative maintenance, verifying the resistance and power supply of this 480V heater is standard practice to avoid catastrophic compressor failure and ensure long-term system reliability in demanding high-voltage environments.
Key Benefits for the Contractor- Prevents Flooded Starts: Stops liquid refrigerant from condensing in the oil, eliminating foam-over and bearing washout at startup.
- OEM Compatibility: Specifically designed as a direct 918-0056-21 replacement for precise fitment on Copeland industrial compressors.
- High-Voltage Performance: Engineered for 480V industrial power supplies, providing consistent heat output without the need for step-down transformers.
- Protects System Integrity: Minimizes the risk of liquid slugging, which can shatter internal valve plates or damage scroll geometry.
- Durable Infrastructure: Built with industrial-grade materials to withstand the thermal expansion and contraction cycles typical of HVACR refrigeration units.
Why is a 480V crankcase heater necessary even in warm environments?
Even in moderate temperatures, the compressor crankcase can become the coolest part of the system during the off-cycle. This temperature differential triggers refrigerant migration. The 918-0056-21 heater maintains the oil temperature high enough to keep refrigerant in a vapor state, ensuring the pump is ready for a safe start.
How do I verify if the heater is functioning properly?
A veteran technician should perform a continuity test or check the amperage draw while the unit is energized. If the heater is cold to the touch during a compressor off-cycle, it likely has an open circuit and requires immediate replacement to prevent oil saturation.
Can I use this heater on a 240V system?
No. The 918-0056-21 is hard-wired for 480V operation. Installing it on a lower voltage will result in insufficient wattage output, failing to provide the necessary heat to prevent oil dilution and potentially leading to compressor damage.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
