Copeland 914-0036-16 Start Capacitor
The Copeland 914-0036-16 Start Capacitor is a high-torque electrical component engineered for single-phase compressor motor starting in domestic and commercial HVACR applications. Rated for 340-408 Microfarad (MFD) and 250Vac, this round start capacitor provides the necessary phase shift to overcome initial mechanical inertia during the startup cycle. As an OEM replacement part, it ensures precise electrical compatibility with Copeland-brand compressors, protecting the windings from excessive heat and prolonged amperage spikes often associated with weak start capacitors. Designed for heavy-duty service in refrigeration and air conditioning systems, this capacitor supports reliable operation on 50/60 Hz circuits. Replacing a degraded unit with this 340-408 uF 250V capacitor is critical for preventing short cycling and motor burnout, essentially restoring the smooth start-up performance required for high-efficiency system operation.
Key Benefits:
- Optimal Starting Torque: Provides the critical 340-408 MFD boost required for high-static HVAC compressor startup.
- OEM Compatibility: Specifically designed as an Emerson Copeland replacement part to maintain system integrity.
- Thermal Protection: Reduces the duration of locked-rotor amperage to prevent winding insulation failure.
- Durable Construction: Built to withstand the fluctuating demands of commercial refrigeration and residential AC units.
- Frequency Versatility: Fully operational on both 50Hz and 60Hz electrical frequencies.
Common Questions:
How do I know if my compressor start capacitor is bad?
Technicians typically look for humming noises from the outdoor unit, a compressor that fails to turn on, or visual signs like bulging or leaking oil. Using a multimeter to verify the microfarad rating against the 340-408 uF specification is the only way to confirm electrical failure.
Can I use a higher voltage capacitor as a replacement?
Yes, you can use a capacitor with a higher voltage rating (e.g., 330V or 440V) as long as the capacitance (MFD) stays within the 340-408 range. However, you must never use a capacitor with a lower voltage rating than the original 250V specification.
What is the difference between a start capacitor and a run capacitor?
A start capacitor like this Copeland 914-0036-16 only stays in the circuit for a few seconds to provide a torque boost before being dropped out by a relay. A run capacitor remains in the circuit continuously to optimize motor efficiency.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Copeland 914-0036-16 Start Capacitor
The Copeland 914-0036-16 Start Capacitor is a high-torque electrical component engineered for single-phase compressor motor starting in domestic and commercial HVACR applications. Rated for 340-408 Microfarad (MFD) and 250Vac, this round start capacitor provides the necessary phase shift to overcome initial mechanical inertia during the startup cycle. As an OEM replacement part, it ensures precise electrical compatibility with Copeland-brand compressors, protecting the windings from excessive heat and prolonged amperage spikes often associated with weak start capacitors. Designed for heavy-duty service in refrigeration and air conditioning systems, this capacitor supports reliable operation on 50/60 Hz circuits. Replacing a degraded unit with this 340-408 uF 250V capacitor is critical for preventing short cycling and motor burnout, essentially restoring the smooth start-up performance required for high-efficiency system operation.
Key Benefits:
- Optimal Starting Torque: Provides the critical 340-408 MFD boost required for high-static HVAC compressor startup.
- OEM Compatibility: Specifically designed as an Emerson Copeland replacement part to maintain system integrity.
- Thermal Protection: Reduces the duration of locked-rotor amperage to prevent winding insulation failure.
- Durable Construction: Built to withstand the fluctuating demands of commercial refrigeration and residential AC units.
- Frequency Versatility: Fully operational on both 50Hz and 60Hz electrical frequencies.
Common Questions:
How do I know if my compressor start capacitor is bad?
Technicians typically look for humming noises from the outdoor unit, a compressor that fails to turn on, or visual signs like bulging or leaking oil. Using a multimeter to verify the microfarad rating against the 340-408 uF specification is the only way to confirm electrical failure.
Can I use a higher voltage capacitor as a replacement?
Yes, you can use a capacitor with a higher voltage rating (e.g., 330V or 440V) as long as the capacitance (MFD) stays within the 340-408 range. However, you must never use a capacitor with a lower voltage rating than the original 250V specification.
What is the difference between a start capacitor and a run capacitor?
A start capacitor like this Copeland 914-0036-16 only stays in the circuit for a few seconds to provide a torque boost before being dropped out by a relay. A run capacitor remains in the circuit continuously to optimize motor efficiency.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Copeland 914-0036-16 Start Capacitor is a high-torque electrical component engineered for single-phase compressor motor starting in domestic and commercial HVACR applications. Rated for 340-408 Microfarad (MFD) and 250Vac, this round start capacitor provides the necessary phase shift to overcome initial mechanical inertia during the startup cycle. As an OEM replacement part, it ensures precise electrical compatibility with Copeland-brand compressors, protecting the windings from excessive heat and prolonged amperage spikes often associated with weak start capacitors. Designed for heavy-duty service in refrigeration and air conditioning systems, this capacitor supports reliable operation on 50/60 Hz circuits. Replacing a degraded unit with this 340-408 uF 250V capacitor is critical for preventing short cycling and motor burnout, essentially restoring the smooth start-up performance required for high-efficiency system operation.
Key Benefits:
- Optimal Starting Torque: Provides the critical 340-408 MFD boost required for high-static HVAC compressor startup.
- OEM Compatibility: Specifically designed as an Emerson Copeland replacement part to maintain system integrity.
- Thermal Protection: Reduces the duration of locked-rotor amperage to prevent winding insulation failure.
- Durable Construction: Built to withstand the fluctuating demands of commercial refrigeration and residential AC units.
- Frequency Versatility: Fully operational on both 50Hz and 60Hz electrical frequencies.
Common Questions:
How do I know if my compressor start capacitor is bad?
Technicians typically look for humming noises from the outdoor unit, a compressor that fails to turn on, or visual signs like bulging or leaking oil. Using a multimeter to verify the microfarad rating against the 340-408 uF specification is the only way to confirm electrical failure.
Can I use a higher voltage capacitor as a replacement?
Yes, you can use a capacitor with a higher voltage rating (e.g., 330V or 440V) as long as the capacitance (MFD) stays within the 340-408 range. However, you must never use a capacitor with a lower voltage rating than the original 250V specification.
What is the difference between a start capacitor and a run capacitor?
A start capacitor like this Copeland 914-0036-16 only stays in the circuit for a few seconds to provide a torque boost before being dropped out by a relay. A run capacitor remains in the circuit continuously to optimize motor efficiency.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
