ClimateMaster S14S0017N17 Motor
The ClimateMaster S14S0017N17 is a high-performance ECM blower motor with controller specifically engineered for ClimateMaster Tranquility series and water-source heat pump applications. This 1 HP variable speed motor operates on a 208/230V power supply and provides the precise airflow modulation required to maintain optimal static pressure in demanding geothermal systems. As a genuine OEM replacement motor, it features an integrated control module that connects via a standard 3-wire plug, ensuring a direct fit and seamless communication with the existing unit control board. Replacing an inefficient PSC motor with this electronically commutated motor improves total system SEER and EER ratings while reducing operational noise levels. Built with durable steel housing and permanently lubricated ball bearings, this high-efficiency HVAC motor is designed for continuous duty-cycle performance. For field technicians, verifying the 24VAC signal from the thermostat to the ICM interface board is critical during installation to ensure proper ramp-up and CFM delivery.
Key Benefits:- OEM Precision: Specifically programmed for ClimateMaster geothermal units, eliminating the need for complex field programming.
- Advanced Efficiency: The variable speed ECM technology significantly reduces energy consumption compared to standard induction motors.
- Integrated Controller: Features a factory-matched motor controller module to ensure torque and speed parameters match the original system design.
- Rugged Construction: Equipped with permanently lubricated ball bearings for reliable operation in high-humidity water-source environments.
- Noise Reduction: Soft-start capabilities and smooth variable speed operation minimize "duck-bill" noise and cabinet vibration.
Is this motor pre-programmed for my specific unit?
Yes, the S14S0017N17 comes as a programmed assembly. However, it is vital to match the part number exactly with your unit's data plate, as ClimateMaster programs these modules with specific airflow tables for different cabinet sizes.
Can I replace just the control module or the motor separately?
While the module and motor can sometimes be separated, it is highly recommended to replace them as a complete ECM motor and controller assembly to ensure electrical compatibility and prevent premature failure of the new component.
What are the symptoms of a failing ECM controller?
Common signs include the blower failing to start despite receiving a 24V "G" call, erratic "hunting" speeds, or the motor shaft being difficult to turn manually. Always check the low voltage harness and Molex plugs for loose pins before concluding the motor is defective.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $927.60
-65%$927.60
$324.66ClimateMaster S14S0017N17 Motor
The ClimateMaster S14S0017N17 is a high-performance ECM blower motor with controller specifically engineered for ClimateMaster Tranquility series and water-source heat pump applications. This 1 HP variable speed motor operates on a 208/230V power supply and provides the precise airflow modulation required to maintain optimal static pressure in demanding geothermal systems. As a genuine OEM replacement motor, it features an integrated control module that connects via a standard 3-wire plug, ensuring a direct fit and seamless communication with the existing unit control board. Replacing an inefficient PSC motor with this electronically commutated motor improves total system SEER and EER ratings while reducing operational noise levels. Built with durable steel housing and permanently lubricated ball bearings, this high-efficiency HVAC motor is designed for continuous duty-cycle performance. For field technicians, verifying the 24VAC signal from the thermostat to the ICM interface board is critical during installation to ensure proper ramp-up and CFM delivery.
Key Benefits:- OEM Precision: Specifically programmed for ClimateMaster geothermal units, eliminating the need for complex field programming.
- Advanced Efficiency: The variable speed ECM technology significantly reduces energy consumption compared to standard induction motors.
- Integrated Controller: Features a factory-matched motor controller module to ensure torque and speed parameters match the original system design.
- Rugged Construction: Equipped with permanently lubricated ball bearings for reliable operation in high-humidity water-source environments.
- Noise Reduction: Soft-start capabilities and smooth variable speed operation minimize "duck-bill" noise and cabinet vibration.
Is this motor pre-programmed for my specific unit?
Yes, the S14S0017N17 comes as a programmed assembly. However, it is vital to match the part number exactly with your unit's data plate, as ClimateMaster programs these modules with specific airflow tables for different cabinet sizes.
Can I replace just the control module or the motor separately?
While the module and motor can sometimes be separated, it is highly recommended to replace them as a complete ECM motor and controller assembly to ensure electrical compatibility and prevent premature failure of the new component.
What are the symptoms of a failing ECM controller?
Common signs include the blower failing to start despite receiving a 24V "G" call, erratic "hunting" speeds, or the motor shaft being difficult to turn manually. Always check the low voltage harness and Molex plugs for loose pins before concluding the motor is defective.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The ClimateMaster S14S0017N17 is a high-performance ECM blower motor with controller specifically engineered for ClimateMaster Tranquility series and water-source heat pump applications. This 1 HP variable speed motor operates on a 208/230V power supply and provides the precise airflow modulation required to maintain optimal static pressure in demanding geothermal systems. As a genuine OEM replacement motor, it features an integrated control module that connects via a standard 3-wire plug, ensuring a direct fit and seamless communication with the existing unit control board. Replacing an inefficient PSC motor with this electronically commutated motor improves total system SEER and EER ratings while reducing operational noise levels. Built with durable steel housing and permanently lubricated ball bearings, this high-efficiency HVAC motor is designed for continuous duty-cycle performance. For field technicians, verifying the 24VAC signal from the thermostat to the ICM interface board is critical during installation to ensure proper ramp-up and CFM delivery.
Key Benefits:- OEM Precision: Specifically programmed for ClimateMaster geothermal units, eliminating the need for complex field programming.
- Advanced Efficiency: The variable speed ECM technology significantly reduces energy consumption compared to standard induction motors.
- Integrated Controller: Features a factory-matched motor controller module to ensure torque and speed parameters match the original system design.
- Rugged Construction: Equipped with permanently lubricated ball bearings for reliable operation in high-humidity water-source environments.
- Noise Reduction: Soft-start capabilities and smooth variable speed operation minimize "duck-bill" noise and cabinet vibration.
Is this motor pre-programmed for my specific unit?
Yes, the S14S0017N17 comes as a programmed assembly. However, it is vital to match the part number exactly with your unit's data plate, as ClimateMaster programs these modules with specific airflow tables for different cabinet sizes.
Can I replace just the control module or the motor separately?
While the module and motor can sometimes be separated, it is highly recommended to replace them as a complete ECM motor and controller assembly to ensure electrical compatibility and prevent premature failure of the new component.
What are the symptoms of a failing ECM controller?
Common signs include the blower failing to start despite receiving a 24V "G" call, erratic "hunting" speeds, or the motor shaft being difficult to turn manually. Always check the low voltage harness and Molex plugs for loose pins before concluding the motor is defective.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
