ClimateMaster 69172600 Reversing Valve
The ClimateMaster 69172600 Reversing Valve is a critical OEM replacement part designed for high-performance heat pump systems. This heavy-duty 4-way reversing valve facilitates the precise redirection of refrigerant flow, allowing the unit to toggle seamlessly between heating and cooling modes. Engineered for R-410A refrigerant applications, it maintains system integrity under high-pressure conditions up to 690 psig. As a ClimateMaster 69172600 genuine component, it ensures specific HVAC part compatibility for residential and commercial geothermal units, effectively mitigating the risk of refrigerant flow reversal failures during peak seasonal transitions.
This reversing valve without coil configuration requires a separate 24V solenoid for operation. For veteran techs, the ClimateMaster 69172600 installation involves standard sweat connections—typically 3/8" by 7/8"—demanding expert brazing techniques. Using a wet rag to protect the internal PTFE slide and hermetic brass housing from temperatures exceeding 110°C is mandatory to prevent terminal damage. By utilizing this factory-authorized part, contractors optimize the energy efficiency of the system while ensuring the solenoid activated valve defaults to the correct fail-safe position required by the specific equipment logic.
Key Benefits for Contractors- Precision Refrigerant Control: High-grade reversing valve construction allows for instantaneous cycle inversion with minimal pressure drop.
- Enhanced System Longevity: Designed to minimize friction on the internal metal slide, reducing wear during frequent heating and cooling cycles.
- Broad Application: Compatible with various ClimateMaster, Carrier, and geothermal heat pump models utilizing HFC-410A.
- Durable Hermetic Seal: Brass body assembly provides robust protection against leaks and environmental stress in HVACR systems.
Does this unit include the solenoid?
No, this is a reversing valve without coil. You must reuse your existing coil or purchase a compatible 24V solenoid separately.
What refrigerant is this valve rated for?
It is primarily engineered for R-410A but is compatible with most CFC, HCFC, and HFC refrigerants within its 690 psig operating range.
What happens if the solenoid fails?
Most ClimateMaster systems are piped so the valve defaults to heating mode upon electrical failure, though you should verify your specific unit's wiring schematic (O or B terminal) before installation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
ClimateMaster 69172600 Reversing Valve
The ClimateMaster 69172600 Reversing Valve is a critical OEM replacement part designed for high-performance heat pump systems. This heavy-duty 4-way reversing valve facilitates the precise redirection of refrigerant flow, allowing the unit to toggle seamlessly between heating and cooling modes. Engineered for R-410A refrigerant applications, it maintains system integrity under high-pressure conditions up to 690 psig. As a ClimateMaster 69172600 genuine component, it ensures specific HVAC part compatibility for residential and commercial geothermal units, effectively mitigating the risk of refrigerant flow reversal failures during peak seasonal transitions.
This reversing valve without coil configuration requires a separate 24V solenoid for operation. For veteran techs, the ClimateMaster 69172600 installation involves standard sweat connections—typically 3/8" by 7/8"—demanding expert brazing techniques. Using a wet rag to protect the internal PTFE slide and hermetic brass housing from temperatures exceeding 110°C is mandatory to prevent terminal damage. By utilizing this factory-authorized part, contractors optimize the energy efficiency of the system while ensuring the solenoid activated valve defaults to the correct fail-safe position required by the specific equipment logic.
Key Benefits for Contractors- Precision Refrigerant Control: High-grade reversing valve construction allows for instantaneous cycle inversion with minimal pressure drop.
- Enhanced System Longevity: Designed to minimize friction on the internal metal slide, reducing wear during frequent heating and cooling cycles.
- Broad Application: Compatible with various ClimateMaster, Carrier, and geothermal heat pump models utilizing HFC-410A.
- Durable Hermetic Seal: Brass body assembly provides robust protection against leaks and environmental stress in HVACR systems.
Does this unit include the solenoid?
No, this is a reversing valve without coil. You must reuse your existing coil or purchase a compatible 24V solenoid separately.
What refrigerant is this valve rated for?
It is primarily engineered for R-410A but is compatible with most CFC, HCFC, and HFC refrigerants within its 690 psig operating range.
What happens if the solenoid fails?
Most ClimateMaster systems are piped so the valve defaults to heating mode upon electrical failure, though you should verify your specific unit's wiring schematic (O or B terminal) before installation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The ClimateMaster 69172600 Reversing Valve is a critical OEM replacement part designed for high-performance heat pump systems. This heavy-duty 4-way reversing valve facilitates the precise redirection of refrigerant flow, allowing the unit to toggle seamlessly between heating and cooling modes. Engineered for R-410A refrigerant applications, it maintains system integrity under high-pressure conditions up to 690 psig. As a ClimateMaster 69172600 genuine component, it ensures specific HVAC part compatibility for residential and commercial geothermal units, effectively mitigating the risk of refrigerant flow reversal failures during peak seasonal transitions.
This reversing valve without coil configuration requires a separate 24V solenoid for operation. For veteran techs, the ClimateMaster 69172600 installation involves standard sweat connections—typically 3/8" by 7/8"—demanding expert brazing techniques. Using a wet rag to protect the internal PTFE slide and hermetic brass housing from temperatures exceeding 110°C is mandatory to prevent terminal damage. By utilizing this factory-authorized part, contractors optimize the energy efficiency of the system while ensuring the solenoid activated valve defaults to the correct fail-safe position required by the specific equipment logic.
Key Benefits for Contractors- Precision Refrigerant Control: High-grade reversing valve construction allows for instantaneous cycle inversion with minimal pressure drop.
- Enhanced System Longevity: Designed to minimize friction on the internal metal slide, reducing wear during frequent heating and cooling cycles.
- Broad Application: Compatible with various ClimateMaster, Carrier, and geothermal heat pump models utilizing HFC-410A.
- Durable Hermetic Seal: Brass body assembly provides robust protection against leaks and environmental stress in HVACR systems.
Does this unit include the solenoid?
No, this is a reversing valve without coil. You must reuse your existing coil or purchase a compatible 24V solenoid separately.
What refrigerant is this valve rated for?
It is primarily engineered for R-410A but is compatible with most CFC, HCFC, and HFC refrigerants within its 690 psig operating range.
What happens if the solenoid fails?
Most ClimateMaster systems are piped so the valve defaults to heating mode upon electrical failure, though you should verify your specific unit's wiring schematic (O or B terminal) before installation.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
