Century Motors FDL6002A Motor
As a direct-fit replacement for the Century F48T74A01, the Century FDL6002A Motor is a high-performance 4-speed furnace blower motor engineered for professional-grade reliability in residential and light commercial HVAC applications. This direct drive blower motor features a high-torque Permanent Split Capacitor (PSC) design with a multi-horsepower capability ranging from 3/4 HP down to 1/5 HP, ensuring precise airflow control across various system demands. Operable on 115 Vac single-phase power, it delivers a steady 1075 RPM at 9.1 Amps full-load capacity, making it a versitile stock item for service trucks.
Built with a robust 48 Nema Frame size and a 5.6-inch diameter rolled steel shell, this motor utilizes an Open Air Over (OAO) enclosure for efficient thermal dissipation. The ball bearing system ensures long-term operational stability and reduced friction compared to standard sleeve bearings. Connectivity is streamlined via a 1/2" x 5" shaft with a flat and reversible rotation capabilities, allowing for easy adaptation to either CW or CCW installations. This unit is electronically protected with automatic thermal overload protection to safeguard the windings under heavy load conditions in extreme 40°C ambient environments.
Key Benefits for Contractors:- Universal Compatibility: Serves as a direct replacement for numerous OEM brands including Emerson 5470, Genteq 3466, and Rheem 51-23017-42.
- Flexible Installation: Features reversible rotation and multiple mounting options, including belly band, extended thru-bolts, and shell holes.
- Multi-Speed Efficiency: The 4-speed configuration allows for fine-tuning static pressure and CFM requirements for optimal system performance.
- Heavy-Duty Construction: Equipped with dual ball bearings and Class B insulation for extended service life in demanding blower duty cycles.
What capacitor is required for the FDL6002A?
This motor typically requires a 10 MFD / 370V run capacitor. Depending on the specific horsepower lead used (3/4 HP vs 1/5 HP), capacitor requirements may vary; always refer to the wiring diagram on the motor nameplate for verified values.
How do I change the rotation of this motor?
Rotation is easily reversed by swapping the two leads in the motor's lead plug or following the internal wiring instructions provided on the housing, allowing for both clockwise and counter-clockwise airflow configurations.
Can this motor replace a 1/3 HP or 1/2 HP unit?
Yes, because this is a multi-HP motor, it is designed to safely operate at lower horsepower ratings (1/2, 1/3, 1/4, 1/5) by utilizing the appropriate speed taps to match the original blower wheel's requirements.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Century Motors FDL6002A Motor
As a direct-fit replacement for the Century F48T74A01, the Century FDL6002A Motor is a high-performance 4-speed furnace blower motor engineered for professional-grade reliability in residential and light commercial HVAC applications. This direct drive blower motor features a high-torque Permanent Split Capacitor (PSC) design with a multi-horsepower capability ranging from 3/4 HP down to 1/5 HP, ensuring precise airflow control across various system demands. Operable on 115 Vac single-phase power, it delivers a steady 1075 RPM at 9.1 Amps full-load capacity, making it a versitile stock item for service trucks.
Built with a robust 48 Nema Frame size and a 5.6-inch diameter rolled steel shell, this motor utilizes an Open Air Over (OAO) enclosure for efficient thermal dissipation. The ball bearing system ensures long-term operational stability and reduced friction compared to standard sleeve bearings. Connectivity is streamlined via a 1/2" x 5" shaft with a flat and reversible rotation capabilities, allowing for easy adaptation to either CW or CCW installations. This unit is electronically protected with automatic thermal overload protection to safeguard the windings under heavy load conditions in extreme 40°C ambient environments.
Key Benefits for Contractors:- Universal Compatibility: Serves as a direct replacement for numerous OEM brands including Emerson 5470, Genteq 3466, and Rheem 51-23017-42.
- Flexible Installation: Features reversible rotation and multiple mounting options, including belly band, extended thru-bolts, and shell holes.
- Multi-Speed Efficiency: The 4-speed configuration allows for fine-tuning static pressure and CFM requirements for optimal system performance.
- Heavy-Duty Construction: Equipped with dual ball bearings and Class B insulation for extended service life in demanding blower duty cycles.
What capacitor is required for the FDL6002A?
This motor typically requires a 10 MFD / 370V run capacitor. Depending on the specific horsepower lead used (3/4 HP vs 1/5 HP), capacitor requirements may vary; always refer to the wiring diagram on the motor nameplate for verified values.
How do I change the rotation of this motor?
Rotation is easily reversed by swapping the two leads in the motor's lead plug or following the internal wiring instructions provided on the housing, allowing for both clockwise and counter-clockwise airflow configurations.
Can this motor replace a 1/3 HP or 1/2 HP unit?
Yes, because this is a multi-HP motor, it is designed to safely operate at lower horsepower ratings (1/2, 1/3, 1/4, 1/5) by utilizing the appropriate speed taps to match the original blower wheel's requirements.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
As a direct-fit replacement for the Century F48T74A01, the Century FDL6002A Motor is a high-performance 4-speed furnace blower motor engineered for professional-grade reliability in residential and light commercial HVAC applications. This direct drive blower motor features a high-torque Permanent Split Capacitor (PSC) design with a multi-horsepower capability ranging from 3/4 HP down to 1/5 HP, ensuring precise airflow control across various system demands. Operable on 115 Vac single-phase power, it delivers a steady 1075 RPM at 9.1 Amps full-load capacity, making it a versitile stock item for service trucks.
Built with a robust 48 Nema Frame size and a 5.6-inch diameter rolled steel shell, this motor utilizes an Open Air Over (OAO) enclosure for efficient thermal dissipation. The ball bearing system ensures long-term operational stability and reduced friction compared to standard sleeve bearings. Connectivity is streamlined via a 1/2" x 5" shaft with a flat and reversible rotation capabilities, allowing for easy adaptation to either CW or CCW installations. This unit is electronically protected with automatic thermal overload protection to safeguard the windings under heavy load conditions in extreme 40°C ambient environments.
Key Benefits for Contractors:- Universal Compatibility: Serves as a direct replacement for numerous OEM brands including Emerson 5470, Genteq 3466, and Rheem 51-23017-42.
- Flexible Installation: Features reversible rotation and multiple mounting options, including belly band, extended thru-bolts, and shell holes.
- Multi-Speed Efficiency: The 4-speed configuration allows for fine-tuning static pressure and CFM requirements for optimal system performance.
- Heavy-Duty Construction: Equipped with dual ball bearings and Class B insulation for extended service life in demanding blower duty cycles.
What capacitor is required for the FDL6002A?
This motor typically requires a 10 MFD / 370V run capacitor. Depending on the specific horsepower lead used (3/4 HP vs 1/5 HP), capacitor requirements may vary; always refer to the wiring diagram on the motor nameplate for verified values.
How do I change the rotation of this motor?
Rotation is easily reversed by swapping the two leads in the motor's lead plug or following the internal wiring instructions provided on the housing, allowing for both clockwise and counter-clockwise airflow configurations.
Can this motor replace a 1/3 HP or 1/2 HP unit?
Yes, because this is a multi-HP motor, it is designed to safely operate at lower horsepower ratings (1/2, 1/3, 1/4, 1/5) by utilizing the appropriate speed taps to match the original blower wheel's requirements.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
