Carrier LA01RA330 Fan Blade
When you're out on a call for a Carrier condenser unit repair, precision is everything to keep those head pressures in check. This Carrier LA01RA330 fan blade is the factory-specified solution for maintaining the OEM airflow performance your client’s system was engineered for. Measuring a true 24 inches in diameter with a 15-degree pitch, this 3-blade propeller is high-performance aluminum, designed for a 1/2" shaft and Clockwise (CW) rotation. For a veteran tech, you know that a mismatched pitch or diameter can lead to motor overloading or inadequate heat rejection, but this genuine Carrier replacement part ensures the 825 RPM operational target is met without the vibration-induced fatigue seen in universal "will-fit" alternatives.
The HVAC fan blade replacement process requires exact specs to protect the condenser motor’s longevity. The Carrier LA01RA330 specifications are tailored for specific outdoor units like the 24ACA418A0030010 and PA14NA series, moving the precise CFM required to pull heat through the coils effectively. By using a balanced AC condenser fan blade, you eliminate the erratic wobbling that causes premature bearing failure in the motor. Whether you're dealing with a residential split system or a light commercial setup, this blade provides the reliability needed for peak summer loads.
- Optimized Heat Rejection: The 15-degree pitch is precision-calibrated to maintain design head pressures and efficiency levels.
- Reduced Mechanical Stress: Factory-balanced 3-blade design minimizes vibration, protecting the motor shaft and bearings from unnecessary wear.
- Durable Aluminum Construction: Built to withstand harsh outdoor environments and resist corrosion for long-term operational stability.
- Exact Shaft Fitment: Standard 1/2" bore ensures a secure, slip-free connection to the motor for consistent torque transfer.
Common Questions
How do I confirm the rotation for the LA01RA330?
This blade is designed for Clockwise (CW) rotation. Always verify the rotation by looking at the discharge side (top) of the unit or checking the motor nameplate to ensure compatibility with your specific condenser motor.
Why is the 15-degree pitch critical for this model?
The pitch determines the volume of air the motor must move. Installing a blade with a higher or lower pitch can cause the motor to operate outside its designed amp draw, leading to overheating or poor cooling performance.
Can I use this on a 5/8" motor shaft?
No, this specific part is manufactured with a 1/2" hub bore. Attempting to modify the hub or force fitment will compromise the balance and safety of the assembly.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $318.77
-65%$318.77
$111.57Carrier LA01RA330 Fan Blade
When you're out on a call for a Carrier condenser unit repair, precision is everything to keep those head pressures in check. This Carrier LA01RA330 fan blade is the factory-specified solution for maintaining the OEM airflow performance your client’s system was engineered for. Measuring a true 24 inches in diameter with a 15-degree pitch, this 3-blade propeller is high-performance aluminum, designed for a 1/2" shaft and Clockwise (CW) rotation. For a veteran tech, you know that a mismatched pitch or diameter can lead to motor overloading or inadequate heat rejection, but this genuine Carrier replacement part ensures the 825 RPM operational target is met without the vibration-induced fatigue seen in universal "will-fit" alternatives.
The HVAC fan blade replacement process requires exact specs to protect the condenser motor’s longevity. The Carrier LA01RA330 specifications are tailored for specific outdoor units like the 24ACA418A0030010 and PA14NA series, moving the precise CFM required to pull heat through the coils effectively. By using a balanced AC condenser fan blade, you eliminate the erratic wobbling that causes premature bearing failure in the motor. Whether you're dealing with a residential split system or a light commercial setup, this blade provides the reliability needed for peak summer loads.
- Optimized Heat Rejection: The 15-degree pitch is precision-calibrated to maintain design head pressures and efficiency levels.
- Reduced Mechanical Stress: Factory-balanced 3-blade design minimizes vibration, protecting the motor shaft and bearings from unnecessary wear.
- Durable Aluminum Construction: Built to withstand harsh outdoor environments and resist corrosion for long-term operational stability.
- Exact Shaft Fitment: Standard 1/2" bore ensures a secure, slip-free connection to the motor for consistent torque transfer.
Common Questions
How do I confirm the rotation for the LA01RA330?
This blade is designed for Clockwise (CW) rotation. Always verify the rotation by looking at the discharge side (top) of the unit or checking the motor nameplate to ensure compatibility with your specific condenser motor.
Why is the 15-degree pitch critical for this model?
The pitch determines the volume of air the motor must move. Installing a blade with a higher or lower pitch can cause the motor to operate outside its designed amp draw, leading to overheating or poor cooling performance.
Can I use this on a 5/8" motor shaft?
No, this specific part is manufactured with a 1/2" hub bore. Attempting to modify the hub or force fitment will compromise the balance and safety of the assembly.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
When you're out on a call for a Carrier condenser unit repair, precision is everything to keep those head pressures in check. This Carrier LA01RA330 fan blade is the factory-specified solution for maintaining the OEM airflow performance your client’s system was engineered for. Measuring a true 24 inches in diameter with a 15-degree pitch, this 3-blade propeller is high-performance aluminum, designed for a 1/2" shaft and Clockwise (CW) rotation. For a veteran tech, you know that a mismatched pitch or diameter can lead to motor overloading or inadequate heat rejection, but this genuine Carrier replacement part ensures the 825 RPM operational target is met without the vibration-induced fatigue seen in universal "will-fit" alternatives.
The HVAC fan blade replacement process requires exact specs to protect the condenser motor’s longevity. The Carrier LA01RA330 specifications are tailored for specific outdoor units like the 24ACA418A0030010 and PA14NA series, moving the precise CFM required to pull heat through the coils effectively. By using a balanced AC condenser fan blade, you eliminate the erratic wobbling that causes premature bearing failure in the motor. Whether you're dealing with a residential split system or a light commercial setup, this blade provides the reliability needed for peak summer loads.
- Optimized Heat Rejection: The 15-degree pitch is precision-calibrated to maintain design head pressures and efficiency levels.
- Reduced Mechanical Stress: Factory-balanced 3-blade design minimizes vibration, protecting the motor shaft and bearings from unnecessary wear.
- Durable Aluminum Construction: Built to withstand harsh outdoor environments and resist corrosion for long-term operational stability.
- Exact Shaft Fitment: Standard 1/2" bore ensures a secure, slip-free connection to the motor for consistent torque transfer.
Common Questions
How do I confirm the rotation for the LA01RA330?
This blade is designed for Clockwise (CW) rotation. Always verify the rotation by looking at the discharge side (top) of the unit or checking the motor nameplate to ensure compatibility with your specific condenser motor.
Why is the 15-degree pitch critical for this model?
The pitch determines the volume of air the motor must move. Installing a blade with a higher or lower pitch can cause the motor to operate outside its designed amp draw, leading to overheating or poor cooling performance.
Can I use this on a 5/8" motor shaft?
No, this specific part is manufactured with a 1/2" hub bore. Attempting to modify the hub or force fitment will compromise the balance and safety of the assembly.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
