Carrier LA01EA037 Fan Blade
As a seasoned technician, you know that keeping a condensing unit running at peak performance requires precise airflow management. This Carrier LA01EA037 Fan Blade is a genuine OEM replacement part engineered for specific Carrier, Bryant, and Payne residential and commercial condensing units. It features a 22-inch diameter with a 24-degree pitch, optimized for high-static heat rejection without overloading the motor. The 3-blade propeller is built with a 1/2-inch bore and is designed for clockwise (CW) rotation (facing the discharge side).
Replacing a distorted or out-of-balance blade is critical to preventing premature motor bearing failure and maintaining the design subcooling levels of the system. This condenser fan blade is stamped from heavy-duty materials to ensure structural integrity under high-velocity conditions. When performing a swap, always verify the fan blade pitch and rotation to ensure the air pull matches the original manufacturer specifications for your specific HVAC replacement part needs.
Key Benefits for the Jobsite:- Precision Airflow: The 22-inch 3-blade design ensures consistent heat dissipation through the condenser coils.
- Exact Technical Specs: Features a 1/2-inch hub bore and 24-degree pitch for a seamless drop-in fit with OEM motors.
- System Longevity: Helps reduce vibration and noise, protecting the compressor and fan motor from unnecessary wear.
- Weather-Resistant Build: Constructed to withstand outdoor environmental stressors while maintaining balanced rotation.
What is the direction of rotation for the LA01EA037?
This blade is rated for clockwise (CW) rotation. Always verify the lead wires on your motor and the discharge orientation of the unit before installation to ensure the air is moving in the correct direction.
Will this fit any 1/2-inch shaft motor?
While the 1/2-inch bore is standard, it is vital to match the 22-inch diameter and 24-degree pitch. Using an incorrect pitch can overdraw Amps on the motor, leading to thermal overload tripping.
Can I use this to replace a 4-blade assembly?
It is recommended to replace like-for-like. This 3-blade assembly is engineered for specific airflow/pressure curves defined by the unit’s original design.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Original: $119.58
-65%$119.58
$41.85Carrier LA01EA037 Fan Blade
As a seasoned technician, you know that keeping a condensing unit running at peak performance requires precise airflow management. This Carrier LA01EA037 Fan Blade is a genuine OEM replacement part engineered for specific Carrier, Bryant, and Payne residential and commercial condensing units. It features a 22-inch diameter with a 24-degree pitch, optimized for high-static heat rejection without overloading the motor. The 3-blade propeller is built with a 1/2-inch bore and is designed for clockwise (CW) rotation (facing the discharge side).
Replacing a distorted or out-of-balance blade is critical to preventing premature motor bearing failure and maintaining the design subcooling levels of the system. This condenser fan blade is stamped from heavy-duty materials to ensure structural integrity under high-velocity conditions. When performing a swap, always verify the fan blade pitch and rotation to ensure the air pull matches the original manufacturer specifications for your specific HVAC replacement part needs.
Key Benefits for the Jobsite:- Precision Airflow: The 22-inch 3-blade design ensures consistent heat dissipation through the condenser coils.
- Exact Technical Specs: Features a 1/2-inch hub bore and 24-degree pitch for a seamless drop-in fit with OEM motors.
- System Longevity: Helps reduce vibration and noise, protecting the compressor and fan motor from unnecessary wear.
- Weather-Resistant Build: Constructed to withstand outdoor environmental stressors while maintaining balanced rotation.
What is the direction of rotation for the LA01EA037?
This blade is rated for clockwise (CW) rotation. Always verify the lead wires on your motor and the discharge orientation of the unit before installation to ensure the air is moving in the correct direction.
Will this fit any 1/2-inch shaft motor?
While the 1/2-inch bore is standard, it is vital to match the 22-inch diameter and 24-degree pitch. Using an incorrect pitch can overdraw Amps on the motor, leading to thermal overload tripping.
Can I use this to replace a 4-blade assembly?
It is recommended to replace like-for-like. This 3-blade assembly is engineered for specific airflow/pressure curves defined by the unit’s original design.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
As a seasoned technician, you know that keeping a condensing unit running at peak performance requires precise airflow management. This Carrier LA01EA037 Fan Blade is a genuine OEM replacement part engineered for specific Carrier, Bryant, and Payne residential and commercial condensing units. It features a 22-inch diameter with a 24-degree pitch, optimized for high-static heat rejection without overloading the motor. The 3-blade propeller is built with a 1/2-inch bore and is designed for clockwise (CW) rotation (facing the discharge side).
Replacing a distorted or out-of-balance blade is critical to preventing premature motor bearing failure and maintaining the design subcooling levels of the system. This condenser fan blade is stamped from heavy-duty materials to ensure structural integrity under high-velocity conditions. When performing a swap, always verify the fan blade pitch and rotation to ensure the air pull matches the original manufacturer specifications for your specific HVAC replacement part needs.
Key Benefits for the Jobsite:- Precision Airflow: The 22-inch 3-blade design ensures consistent heat dissipation through the condenser coils.
- Exact Technical Specs: Features a 1/2-inch hub bore and 24-degree pitch for a seamless drop-in fit with OEM motors.
- System Longevity: Helps reduce vibration and noise, protecting the compressor and fan motor from unnecessary wear.
- Weather-Resistant Build: Constructed to withstand outdoor environmental stressors while maintaining balanced rotation.
What is the direction of rotation for the LA01EA037?
This blade is rated for clockwise (CW) rotation. Always verify the lead wires on your motor and the discharge orientation of the unit before installation to ensure the air is moving in the correct direction.
Will this fit any 1/2-inch shaft motor?
While the 1/2-inch bore is standard, it is vital to match the 22-inch diameter and 24-degree pitch. Using an incorrect pitch can overdraw Amps on the motor, leading to thermal overload tripping.
Can I use this to replace a 4-blade assembly?
It is recommended to replace like-for-like. This 3-blade assembly is engineered for specific airflow/pressure curves defined by the unit’s original design.
This item is not eligible for free shipping.
Disclaimer: While we strive for 100% accuracy, product data and specifications are subject to change. Please contact our team to confirm compatibility or technical details before purchasing.
